Toyota Corolla 11th Generation Altis [Merged Threads]

**jut703** · November 6th, 2015 01:48 PM

So walang function to unlock the doors when you remove the key from the ignition?

Sent from my iPhone using Tapatalk

**_Cathy_** · November 6th, 2015 02:13 PM

Originally Posted by shok

Pwede yang 4 features sabay sabay naka-on kung CVT.
Kung MT/ Yung #3 at #4 lang ang pwede.

Bakit ayaw sakin? Pa activate ko kaya sa casa

**shok** · November 6th, 2015 02:23 PM

Originally Posted by _Cathy_

Bakit ayaw sakin? Pa activate ko kaya sa casa

Ano ang gusto mong iactivate?
Yung shift position linked door lock and unlock?

Shift position linked door lock (for G-A/T only):
1. All doors should be closed.
2. Switch the ignition to "ON". Keep the shifter in "P"
3. Within 20 sec of step 2, press and hold the lock button for at least 5 sec.
4. Release lock button. There should be a cycling of the lock unlock. This means that the programming is successful.

Shift position linked door unlock (for G-A/T only):
1. All doors should be closed.
2. Switch the ignition to "ON". Keep the shifter in "P"
3. Within 20 sec of step 2, press and hold the unlock button for at least 5 sec.
4. Release lock button. There should be a cycling of the lock unlock. This means that the programming is successful.

To cancel the function, perform the same steps.

**shok** · November 6th, 2015 02:28 PM

Originally Posted by jut703

So walang function to unlock the doors when you remove the key from the ignition?

Sent from my iPhone using Tapatalk

Wala Jut, but you can activate #4 which unlocks all the doors when you pull the driver side inside door opener within 30 seconds of turning off the engine. If #4 isn't activated, only the driver door unlocks.

I didn't activate this on mine na because I set it to unlock when I shift to "P" which we normally do before turning off the engine.

Sa techstream, on off lang itong mga features na ito. Wala ng complicated steps.

**tevilo** · November 6th, 2015 03:56 PM

Originally Posted by shok

Ano ang gusto mong iactivate?
Yung shift position linked door lock and unlock?

Shift position linked door lock (for G-A/T only):
1. All doors should be closed.
2. Switch the ignition to "ON". Keep the shifter in "P"
3. Within 20 sec of step 2, press and hold the lock button for at least 5 sec.
4. Release lock button. There should be a cycling of the lock unlock. This means that the programming is successful.

Shift position linked door unlock (for G-A/T only):
1. All doors should be closed.
2. Switch the ignition to "ON". Keep the shifter in "P"
3. Within 20 sec of step 2, press and hold the unlock button for at least 5 sec.
4. Release lock button. There should be a cycling of the lock unlock. This means that the programming is successful.

To cancel the function, perform the same steps.

It works, thanks. But was thinking na sana may option din na mag-unlock sya kapag engine off na. Minsan kasi pag heavy traffic I use "P" instead of N+handbrake. But anyway this will do.

**_Cathy_** · November 6th, 2015 04:03 PM

Originally Posted by shok

Ano ang gusto mong iactivate?
Yung shift position linked door lock and unlock?

Shift position linked door lock (for G-A/T only):
1. All doors should be closed.
2. Switch the ignition to "ON". Keep the shifter in "P"
3. Within 20 sec of step 2, press and hold the lock button for at least 5 sec.
4. Release lock button. There should be a cycling of the lock unlock. This means that the programming is successful.

Shift position linked door unlock (for G-A/T only):
1. All doors should be closed.
2. Switch the ignition to "ON". Keep the shifter in "P"
3. Within 20 sec of step 2, press and hold the unlock button for at least 5 sec.
4. Release lock button. There should be a cycling of the lock unlock. This means that the programming is successful.

To cancel the function, perform the same steps.

Yes. This is what I did. I closed all doors. I stepped on brake then shift from P to N. Pressed the lock for 5 secs. Did not hear anything :cry:

**shok** · November 6th, 2015 04:20 PM

Originally Posted by _Cathy_

Yes. This is what I did. I closed all doors. I stepped on brake then shift from P to N. Pressed the lock for 5 secs. Did not hear anything :cry:

Are you trying to disable/enable the speed sensing lock? "N" and lock for 5 seconds is for the speed sensing lock. Is the key turned to "ON" too?
Just checking lang ha. But that's strange.
I wasn't able to do this manually too the first few times. When I got it right, it becomes easy na.

**shok** · November 6th, 2015 04:27 PM

Originally Posted by tevilo

It works, thanks. But was thinking na sana may option din na mag-unlock sya kapag engine off na. Minsan kasi pag heavy traffic I use "P" instead of N+handbrake. But anyway this will do.

Try deactivating #3 and activating #4. That's the closest to unlock after engine off that we can get.

**_Cathy_** · November 6th, 2015 04:38 PM

Originally Posted by shok

Are you trying to disable/enable the speed sensing lock? "N" and lock for 5 seconds is for the speed sensing lock. Is the key turned to "ON" too?
Just checking lang ha. But that's strange.
I wasn't able to do this manually too the first few times. When I got it right, it becomes easy na.

No. I don't want to disable the speed sensing lock.

I want to enable the feature na shifting between P and N will lock/unlock

**shok** · November 6th, 2015 05:14 PM

Originally Posted by _Cathy_

No. I don't want to disable the speed sensing lock.

I want to enable the feature na shifting between P and N will lock/unlock

Oh, don't shift to "N" after turning the key to the the "ON" position.
Keep the shifter in "P", then press and hold lock for 5 secs. This is for the door locking.

Holding unlock is for the door unlock function.