Toyota Corolla 10th Generation Altis Owners [continued]

**vinj** · June 19th, 2012 09:38 AM

Originally Posted by jut703

I've been on XCS for the longest time (eto lang ang murang premium gas haha). vinj, nacompare mo na ba XCS vs V-Power Nitro+ Racing? (whew whattaname)

Haven't tried XCS or V-Power on the Gen 10.5 and I just stick to 93 unleaded since i dont get any detonation. My older 2007 9th Gen would get detonation on 93 octane so it used XCS, and loved the 100 octane Blaze (it runs on 105 octane LPG 85-90% of the time). FC with XCS or Blaze on my 9th gen didn't vary much really unlike when i use XCS on our old Nissan Sentra.

**jut703** · June 20th, 2012 06:48 PM

Thanks bro. Looks like there's really no reason to shift away from XCS then.

**venrich** · June 24th, 2012 03:25 PM

Question po, meron po kaming 2010 1.6V pre-facelifted Altis. Nakita ko lang sa catalogue na merong ilaw dapat sa glove box. Meron kaya sa inyong mga unit? Samen po kc ay wala.

TIA.

**jut703** · June 24th, 2012 03:33 PM

Originally Posted by venrich

Question po, meron po kaming 2010 1.6V pre-facelifted Altis. Nakita ko lang sa catalogue na merong ilaw dapat sa glove box. Meron kaya sa inyong mga unit? Samen po kc ay wala.

TIA.

None on ours. 2.0V pre-facelift.

**jut703** · June 24th, 2012 03:43 PM

Curiously, what's the body code monicker for the 10th gen Altis?

AE92, AE101, AE111 - pretty clear cut right?

The 9th gen Altis owners call their Altises as "ZZ"s. But technically speaking, the pre-facelift 1.6/1.8 10th gens are also "ZZ"s since they carry the same 3ZZ-FE/1ZZ-FE engines.

On the facelifted versions (as well as on a pre-facelift 2.0V), the engine is either a 3ZR-FE or 1ZR-FE. But I don't see anyone referring to their 10th gen as a "ZR".

Official body code though is E120 for the 9th gen and E140 for the 10th gen. But noone uses that (unlike the Corollas of the 90s).

**venrich** · June 24th, 2012 03:47 PM

Maraming salamat po, jut703.

Wala palang lamp ang glove box, pero merong nakalagay sa calatogue na dapat meron.
Akala ko napundi lang, binuksan at hinanap ko pa naman sa loob ng glove box. Yun pala wala akong papalitan.

Thanks again.

**cjv_justice** · June 24th, 2012 06:16 PM

Originally Posted by jut703

Curiously, what's the body code monicker for the 10th gen Altis?

AE92, AE101, AE111 - pretty clear cut right?

The 9th gen Altis owners call their Altises as "ZZ"s. But technically speaking, the pre-facelift 1.6/1.8 10th gens are also "ZZ"s since they carry the same 3ZZ-FE/1ZZ-FE engines.

On the facelifted versions (as well as on a pre-facelift 2.0V), the engine is either a 3ZR-FE or 1ZR-FE. But I don't see anyone referring to their 10th gen as a "ZR".

Official body code though is E120 for the 9th gen and E140 for the 10th gen. But noone uses that (unlike the Corollas of the 90s).

Yeah I'm curious as well...

**jut703** · June 25th, 2012 02:12 AM

Has anyone tried having a custom case made for the wireless remote of the V variants?

For almost 3 years now, I've been using iPod nano cases. Not pretty, but it fits:

I was wondering if may case talaga for it. Currently I have half a mind to get a sheet of black vinyl sticker and have it custom-cut to cover the case but leave the buttons accessible, though I'm not sure if it'll look pretty.

A Google search led me to this though:

May ganyan kaya dito?

**swankydewd** · June 25th, 2012 02:03 PM

*jut703. Please look at the pic below (2nd from the left). I haven't bought one yet and still contemplating. If you're gonna buy one, please do write a review about it.

**jut703** · June 25th, 2012 05:04 PM

Wow, thanks a lot swankydewd.

I contacted the seller already, sana meron for the Altis. Meron sa pic pero ewan kung may stock. Tapos ang layo din, sa may G.Araneta pa.

I initially wanted leather, but the black silicone case actually looks okay.