Results 2,321 to 2,330 of 8993
-
January 2nd, 2014 11:46 PM #2321
-
January 2nd, 2014 11:47 PM #2322
-
Tsikot Member
- Join Date
- Jan 2014
- Posts
- 2
January 2nd, 2014 11:55 PM #2323Hi guys, newbie here. Mine is 1.3 E A/T metallic gray. So far so good naman pero mejo na dedelay-an ako pag tapak ko yung gas and break. Wala naman natunog sakin katulad nung mga nababasa ko dito. 16 days old na sya sakin and naka 1k mileage na agad ako kaya bukas pupunta ako sa casa. First time ko mag karon ng car and i'm 18 years old. Nakapag back read na ko simula sa umpisa and it took me 2 days to finish reading this thread. Haha. Any tips for me? kung pano mag paganda/customize, maintain a brand new car? Everyday ko siya nililinis using chamois with water. Ayaw pa kasi ng dad ko na ipa-car wash kasi brand new pa daw. lol
-
Tsikoteer
- Join Date
- Mar 2008
- Posts
- 52,731
-
Verified Tsikot Member
- Join Date
- Dec 2013
- Posts
- 21
January 3rd, 2014 09:45 AM #2325
-
Verified Tsikot Member
- Join Date
- Oct 2013
- Posts
- 89
January 3rd, 2014 10:34 AM #2326
-
Tsikoteer
- Join Date
- Oct 2008
- Posts
- 525
January 3rd, 2014 11:16 AM #2327
-
Verified Tsikot Member
- Join Date
- Apr 2013
- Posts
- 113
January 3rd, 2014 11:45 AM #2328
-
Verified Tsikot Member
- Join Date
- Apr 2013
- Posts
- 113
January 3rd, 2014 11:47 AM #2329may better way pa kaya to remove this minor scratch permanently? ga buhok lang naman perl pansinin pad in since nag whiwhite yung scratch nya
-
Verified Tsikot Member
- Join Date
- Jul 2009
- Posts
- 62
January 3rd, 2014 08:47 PM #2330Kung medyo malakas ang loob nyo, try nyo mag wet sanding. Dati nung "bago" ung auto ko madalas ko ginagawa yan para matangal mga tama ng sidecar pag naka parada sa labas.
1. Clean part with a liquid dish soap and water mix ie. Joy. (this clears the wax).
2. Wet sand the part with a 1500 grit (preferably 2000 grit) sand paper til scratch disappears. Make sure to use mild even pressure when using the sand paper. This will leave a white part on the clear coat and flattens the scratch mark.
3. Wash the part with water to clear the debris, then dry.
4. Using a variable speed buffer, apply a good rubbing compound. This will remove the white mark made by the sanding. (Pwede din by hand, matagal nga lang).
5. After white mark disappears, apply wax.
Nood lang kayo sa youtube. Daming ganitong videos. Just make sure ung scratch e sa clear coat lang. At di umabot sa masilya.
Daming issue ng SU7:grin:
Xiaomi E-Car