Suzuki Ertiga - 7 seater MPV

[bryan_15]

Hello mga Ka-ertigans,

May nakasubok na ba or gumawa ng any cover para dun sa carpet part below the 2nd row seats and probably sa 3rd row na din? If yes, anong ginamit nyong material at san kayo nakapagpagawa? kapag naka-atras kasi ung 2nd row, un ang natatapakan instead of the matting. kaya ok sanang may cover na din yun. thanks!

[b_9904]

Backread bro

[jonahex]

loves Ertiga because economical fuel consumption

[butchoi_oOo_]

Hello mga Ka-ertigans,

May nakasubok na ba or gumawa ng any cover para dun sa carpet part below the 2nd row seats and probably sa 3rd row na din? If yes, anong ginamit nyong material at san kayo nakapagpagawa? kapag naka-atras kasi ung 2nd row, un ang natatapakan instead of the matting. kaya ok sanang may cover na din yun. thanks!

any carpet to ur liking will do as long as DIY mo nalang un cutting
almost all car owners i know are using the coil type na carpet which u can buy also in rolls, not pre-cut

[dandang]

any carpet to ur liking will do as long as DIY mo nalang un cutting
almost all car owners i know are using the coil type na carpet which u can buy also in rolls, not pre-cut

I was waiting for deep dish matting but there is no mat specifically designed for ertiga. Weathertech sana.

[UnscarreD1925]

Hi Guys!

I felt a guilt for not posting since I'm here since the number of pages was still on single digit :D I'm from QC, I had my Granite Grey GL MT last December and also had my 1st PMS already. Before the PMS I had an FC of 10-12Km/L after driving Laguna Loop/s, Manaoag, Tarlac and some City driving. But after I constantly have 14-16km/L. I'm perfectly noob on cars, I even had my in-laws with me to assist until now (maybe a few more days) since I only had a student permit but had a non-pro last Monday. BTW bought rain visors in Banawe Php 900 and my next addition is central lock/ alarm where my SA quoted me around 6K for both. I also bought a Bluetooth USB Stereo Streamer from CDR King for Php 180 and it works perfectly with no issues. Also my freebies was EWD, backing sensor, matting, tools, tint, etc.

Just a few questions, first about tyre pressure my in-laws told me we must have 28-29psi only since when in motion the tyre inflates, but the recommended tyre pressure on the driver door side suggests differently depending on the number of passenger. Second, does using car DC port below the head unit really affects battery performance (I recall this from my friend) specially for charging devices and using high power consuming appliance like vacuum cleaner etc.?. Third, do you recommend waxing your car (now even if it's new)? My friend was mentioning something about letting the car paint subside/sink in the metal for month/s before applying wax since the car is still new.

Thanks!

[niky]

Hi Guys!

I felt a guilt for not posting since I'm here since the number of pages was still on single digit :D I'm from QC, I had my Granite Grey GL MT last December and also had my 1st PMS already. Before the PMS I had an FC of 10-12Km/L after driving Laguna Loop/s, Manaoag, Tarlac and some City driving. But after I constantly have 14-16km/L. I'm perfectly noob on cars, I even had my in-laws with me to assist until now (maybe a few more days) since I only had a student permit but had a non-pro last Monday. BTW bought rain visors in Banawe Php 900 and my next addition is central lock/ alarm where my SA quoted me around 6K for both. I also bought a Bluetooth USB Stereo Streamer from CDR King for Php 180 and it works perfectly with no issues. Also my freebies was EWD, backing sensor, matting, tools, tint, etc.

Just a few questions, first about tyre pressure my in-laws told me we must have 28-29psi only since when in motion the tyre inflates, but the recommended tyre pressure on the driver door side suggests differently depending on the number of passenger. Second, does using car DC port below the head unit really affects battery performance (I recall this from my friend) specially for charging devices and using high power consuming appliance like vacuum cleaner etc.?. Third, do you recommend waxing your car (now even if it's new)? My friend was mentioning something about letting the car paint subside/sink in the metal for month/s before applying wax since the car is still new.

Thanks!

Follow the door. If you want to save a bit more gas, leave the tire pressures on the door recommendation for "full load", or even a bit more, if your tires are built for it... whatever you're comfortable with.

28-29 psi was common back in the old days, but is no longer recommended by most manufacturers due to the dangers of catastrophic tire failure due to overheating (it takes a long time and a lot of overloading for this to happen... but better safe than sorry).

[sp00nman]

Follow the door. If you want to save a bit more gas, leave the tire pressures on the door recommendation for "full load", or even a bit more, if your tires are built for it... whatever you're comfortable with.

28-29 psi was common back in the old days, but is no longer recommended by most manufacturers due to the dangers of catastrophic tire failure due to overheating (it takes a long time and a lot of overloading for this to happen... but better safe than sorry).

as per door recommendation, 29 psi 2-4 pax then 5-7 pax 32 psi ata.. so kung nag 32-psi then next ride mo eh 2 lang ang sakay including driver- kelangan ba ibaba ulit sa 29psi?

[maruti]

higher tire pressure means less rolling resistance for the tires therefore more mileage. i'm using nitro nd not compressed air (no change of pressure even when there's a temperature change). 32 psi infront and 38psi at d back as recommended by d door sticker for full load. d only drawback is 1 can feel some bumps 4d passengers at d back. aside from that its ok man.

Follow the door. If you want to save a bit more gas, leave the tire pressures on the door recommendation for "full load", or even a bit more, if your tires are built for it... whatever you're comfortable with.

28-29 psi was common back in the old days, but is no longer recommended by most manufacturers due to the dangers of catastrophic tire failure due to overheating (it takes a long time and a lot of overloading for this to happen... but better safe than sorry).

[maruti]

when d avg is displayed, press d right knob (a few seconds) at the console during filing of d tank to reset it to zero. reset d trip a or b into zero by pressing d left knob while trip a or b is displayed. u can now compare d console avg w/ d actual consumption when u divide d distance traveled (trips a or b) by d amount in litres of fuel on d next full tank.

Good afternoon Ertigans! It is nice to be back in this thread. I have been back reading quite a bit and its good to know na dumadami na tayo. I have a question guys, yung FC ko is always at 8.7 km/l even after my first PMS. Paano ba magreset sa gauge nun?

[sp00nman]

when d avg is displayed, press d right knob (a few seconds) at the console during filing of d tank to reset it to zero. reset d trip a or b into zero by pressing d left knob while trip a or b is displayed. u can now compare d console avg w/ d actual consumption when u divide d distance traveled (trips a or b) by d amount in litres of fuel on d next full tank.

nare-reset pala yung FC? dapat nagpapa-gas para ma reset yung ave FC to zero? my understanding to compute for the manual FC is reset trip B to zero, full tank then do the math with between trip B and liters consumed.

yung Ave ko since nakuha namin last Nov.19 is 13.1km/L ngayon, prior to 1st PMS 14km/L yan gradually bumababa ng 0.1 kasi halos city/malapitang driving na lang unlike nung holiday season SLEX/ACTEX

[roycearellano]

for *kalayo, here's my retro-fitted seat cover done in Lapasan, CDO (NMRS).

[Yehan_Yohan]

HI Guys, ok ba ang Nitro air? TIA

[maruti]

got mine filled w/ nitro for 60pesos per tire. auv daw ertiga kc 50pesos lang s car nd motorcycle. bridgestone regalado ave me ngpapalagay ng nitro. free na un fill ups pg medyo malambot.

HI Guys, ok ba ang Nitro air? TIA

[Yehan_Yohan]

got mine filled w/ nitro for 60pesos per tire. auv daw ertiga kc 50pesos lang s car nd motorcycle. bridgestone regalado ave me ngpapalagay ng nitro. free na un fill ups pg medyo malambot.

Thanks Maruti. btw. using Nitro do you still felt lambot ng shock ni Erti natin?

[maruti]

di me panacean eh...

Thanks Maruti. btw. using Nitro do you still felt lambot ng shock ni Erti natin?

[maruti]

di me pansin eh...

Thanks Maruti. btw. using Nitro do you still felt lambot ng shock ni Erti natin?

[kalayo]

for *kalayo, here's my retro-fitted seat cover done in Lapasan, CDO (NMRS).

ayus! very nice. thanks for sharing pics. puntahan ko na iyan bukas.

[mikevan]

Hi ertigans. im a future owner of this fantastic Mpv . im very much excited na to drive this with my family. Purchasing is the GL mt model. Hopefully makuha yun car next month. Under process pa kse ang mga papers. I have no inputs pa to share. Pero im really looking foward to join kung mag kakaroon tayo ng official club that will support by Suzuki. im currently driving the advanza.

[mangjose81]

Hi ertigans. im a future owner of this fantastic Mpv . im very much excited na to drive this with my family. Purchasing is the GL mt model. Hopefully makuha yun car next month. Under process pa kse ang mga papers. I have no inputs pa to share. Pero im really looking foward to join kung mag kakaroon tayo ng official club that will support by Suzuki. im currently driving the advanza.

Yes meron na pong official na Ertiga Club so automatic kasali ka na. Sama ka sa next meeting, mo deginote date yet but its gonna be this coming feb na.

Congrats sa purchase boss and surely you wont regret buying it.