Results 2,691 to 2,700 of 6313
-
Verified Tsikot Member
- Join Date
- May 2011
- Posts
- 17
January 21st, 2015 04:21 AM #2691Address: 201 blk A #4 Del Monte Avenue Quezon City, Quezon City, Metro Manila
Phone02) 366 2844
map:
https://www.google.com.ph/maps/place...07c55a27d2e888
-
Verified Tsikot Member
- Join Date
- May 2011
- Posts
- 17
January 21st, 2015 04:27 AM #2692
-
Verified Tsikot Member
- Join Date
- Jun 2011
- Posts
- 11
January 21st, 2015 06:55 AM #2693
-
Verified Tsikot Member
- Join Date
- Jul 2014
- Posts
- 158
-
Verified Tsikot Member
- Join Date
- Sep 2014
- Posts
- 47
January 21st, 2015 12:15 PM #2695
-
Verified Tsikot Member
- Join Date
- Sep 2014
- Posts
- 47
-
Verified Tsikot Member
- Join Date
- Sep 2014
- Posts
- 47
January 21st, 2015 12:23 PM #2697Been using Ertiga for 4 months now and had my 2nd PMS first week ng Jan. After 2nd, I noticed good improvement on its performance (feeling ko smooth-er and ride) but I'd like to know if my FC is just fine or not. I only get 10.2km/l GL AT. I only have short drives (slow moving road max 60kph and short stops) every day kasi office-work lang and from where I am from (CDO) everything is actually near. Home-wife's office-my office-home is less than 20 kilometers and my gas is just P500/week.
It's tipid na but just checking if that's it or I can be expect to save more with a better 'should be' Ertiga FC.
-
Verified Tsikot Member
- Join Date
- Sep 2014
- Posts
- 1,530
January 21st, 2015 12:24 PM #2698Octane rating is the resistance to pre-maturely igniting under compression.
Performace is affected by additives.
Afiak po.
-
January 21st, 2015 12:29 PM #2699
Steel rims kasi mas malambot compared sa alloy wheels. Kaya pag nadali ka ng matinditinding lubak at na deform and steel rims mo, singaw hangin nyan. Recommended talaga upgrade sa mags, maporma na mas matibay pa. Di mo mapapansin difference nyan sa fc dahil magaan din ang alloy rims.
-
Verified Tsikot Member
- Join Date
- Sep 2014
- Posts
- 47
January 21st, 2015 01:06 PM #2700Replied to your latest post and only read this now. Am from CDO ang got my GL AT from the only Suzuki in the City.
I had Central Lock and Alarm installed before I took out my unit from casa. Cost me 9,5! Very expensive compared outside but just so I won't 'VOID' the electrical warranty.
After seeing the Free Matting and Seat Cover, I had it replaced the soonest. Got a matting from Truevalue Centrio. I forgot what it's called but it's rubber and around 2k lang. Tho, until 2nd row lang. I didn't put one sa 3rd since naka fold lang nmaan most of time so, the free is still on it.
The car seat I had it done in MMRS in Lapasan before CUMC. Also I had plastic cover sa carpet since it's beige, prone to dirt. I will try to post output pic later. Cost me 12k. Expensive but nicely done. Retro-fit sya so they took out the seats. Downside lang, meron nang sound down under on rocky roads but tolerable naman.
My free tint was just plaitnum and full on windshield. Didn't go for the expensive one na since I just drive home-office-home and my car is just parked the whole day. But on high noon, it's not mainit naman.
am still in the look-out for rain visor and i don't know if its the right term, door stopper.
Thought of having park sensor but holding it off until warranty is over para sa labas nalang kumuha. parking area is not a problem in our city tho. so, no worries.
After four months and half, am on 6k+ due to heavy road trips during the holidays. travelled as far as Gingoog and San Fernando bukidnon. so far, so good. Been to Dahilayan too several times. loaded and the handling sa rough road is just fine. Enjoy your ride!
Be careful with channels like "China Observer" on YouTube. There is a clear bias in their posts and...
Xiaomi E-Car