New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 11 of 11

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Join Date
    Jul 2007
    Posts
    20
    #1
    I recently bought a 2nd hand stock sw (ae101 gli) to replace my stock (ae101 xl). Is it hard to replace it?? just need some advice on how to.

    cheers!

  2. Join Date
    Sep 2004
    Posts
    2,975
    #2
    Just take off the center panel ng steering wheel. Usually, this is held in place by clips. May isang malaking nut/bolt holding the steering wheel. Tanggalin mo yung nut, then give it a little twist and pull.

    Sa suking mekaniko sa gas station or talyer, 50petot lang ang katapat nyan.

  3. Join Date
    Jul 2007
    Posts
    20
    #3
    Quote Originally Posted by Galactus View Post
    Just take off the center panel ng steering wheel. Usually, this is held in place by clips. May isang malaking nut/bolt holding the steering wheel. Tanggalin mo yung nut, then give it a little twist and pull.

    Sa suking mekaniko sa gas station or talyer, 50petot lang ang katapat nyan.

    thanks ng madami Galactus..

    Cheers!

  4. Join Date
    Apr 2004
    Posts
    922
    #4
    what about installing a momo steering wheel with a boos kit? or is that too difficult that i should leave to mechanics na lang? hehe

  5. Join Date
    Apr 2006
    Posts
    681
    #5
    Quote Originally Posted by morrissey_05 View Post
    what about installing a momo steering wheel with a boos kit? or is that too difficult that i should leave to mechanics na lang? hehe
    halos same lang sa pag install ng stock sw. basta un boos kit ay akma sa kabitan ng sw. it's a matter of connecting the boos kit then the wheel sa boos. ang di ko lang natry ay un may airbag.

    must try and DIY para matuto ng bago at malaman mo how easy or hard it is para if may papagawa ka sa mekaniko, matatancha mo kung taga o hindi

  6. Join Date
    Jul 2010
    Posts
    7
    #6
    hi sirs..just replaced my stock lancer 95 glxi steering wheel with a momo type steering wheel..screwed up and apparently wasn't quite centered..now i can't seem to remove the adaptor to readjust it..it won't budge at all..

    ..how do i remove adaptor?(tried pulling with wheel attached)

    ..are there any tricks to remove it?would a steering wheel puller work on an adaptor? (removed orig sw without a puller - used brute force)

    ..help..tnx!

How to replace Steering Wheel