Broken wheel stud

[BratPAQ]

The car is honda city 2009, it has 4 stud on each wheel at yung isang stud sa back right tire eh nabali, loose thread daw na pinilit, kaya nung nagpa vulcanize ako eh binali na lang.

now akala ko eh yung stud lang papalitan and it would be cheap, but someone told us na hindi na tulad ng dati yun, ngayon eh whole plate na papalitan, which would cause at least 10k. nag suggest sila na welding na lang.

question, gano ba kadelikado ang running on 3 out of 4 stud sa back wheel? wala pa kasing time pagawa yung sasakyan eh pero ginagamit. at pede na kaya yung welding, hindi delikado?

[crazy_boy]

Hindi na balance yung distribution ng weight ng car sa wheel mo. Per stud mas mabigat na yung dala na weight.

Sent from my GT-I9300 using Tapatalk 2

[robot.sonic]

kung ako ipapawelding ko na lang kesa sa 3 studs lang.

[ngoct282]

up cho các bác d?t hÃ*ng

[jaypee10]

ipa weldin mo dun sa machine shop..baka naman sa gumagawa lang barbecue grill mo ipaweldin..

kung sa machine shop mas alam nila kung paanong diskarte ng weldin ang gagawin nila..

[gr3nd3l]

Delikado yan kung 3 lang ma stress yung ibang stud.. pa Welding mo na lang kung ayaw mo mapagastos ng malaki or hanap ka surplus sa banawe

[yebo]

first time i heard that na papalitan ang whole plate. baka naman niloloko ka lang nun. usually inaalis lang yung broken stud, pina-punch out. tapos ilalagay yung new stud then babatakin using a wheel nut and some spacers/washers para di masira yung plate.

if indeed winewelding na nga yan, why not pabutasan mo na lang then install a lug bolt using the usual process i described above?

[Phoenix67]

Plate papalitan...they're pulling your leg. It is next to impossible to cast a plate with studs tapos, hardended steel pa tapos merun thread ang 4 na studs. Sobrang high tech ng CNC machine that will do that (meaning very expensive)

Try this DIY link - Wheel Stud Replacement - HondaCivicForum.com