TSCP Strada Mods [continued 2]

**nanofossil** · January 24th, 2011 02:18 PM

Originally Posted by flash1919

hi bosb, need your suggestion... just installed cf sticker on my hood.....should i keep the bug deflector?.............TIA

as it is, ok na ang porma pero ako gagamit ng bug deflector i would use a smaller and simpler one, the one that bigblock and tp use. 2,500 lang yata sa banawe.

**ianmitsulancer** · January 24th, 2011 02:59 PM

Originally Posted by nanofossil

^^^ ianmitsulancer likes this!

**doy** · January 24th, 2011 05:10 PM

Originally Posted by flash1919

hi bosb, need your suggestion... just installed cf sticker on my hood.....should i keep the bug deflector?.............TIA

Para sa akin, maganda na sya as-is. Nice shoes, sir.

**Pol-pol** · January 24th, 2011 05:47 PM

Originally Posted by G01

Hehe...hindi naman sir. Galing ako ng Manila kanina. Meron sumabay na Montero Sport na GLS SE sa Mac Arthur Highway. Taka siguro yung owner/driver kung bakit mas mabilis yung Strada ko hehe. Sa Marcos Highway puntang Baguio yung dating third gear lang ngayon 4th gear na.

[SIZE=3]
Sir G01,

Please stop na....mamamatay na ako sa inggit!

Awesome and Winner talaga truck mo![/SIZE]

**Pol-pol** · January 24th, 2011 05:52 PM

[SIZE=3]
Sir Nano,

*sir G01 pala earlier made the same suggestions.

Kung hindi engraving baka pwede yung naka-molde? Parang belt buckle? Baka kailangan i-outsource ito sa Thailand or China?

Baka pwede din na resin na lang or something more sturdy?

I think meron foundry sa Rizal Avenue, Caloocan bandang 3rd - 5th Avenue. Yung molde na lang.

Like ko yan, sinugest ko din kay manong yan. Baka CNC machine pwede?
[/SIZE]

Originally Posted by nanofossil

astig talaga si GO1, matulungan mo rin sana ako sa balak naming cover sa tow hitch receiver ko. i've been searching for a company who can engrave metal but to no avail. project namin ito nina LR at Bigblock. kapag natuloy ito pwede nang mag avail ang mga BOSB's na may tow hitch receiver. I got this idea from the setup of PolPol. Yung Harley Davidson cover nya. President, pwede rin nating gamiting pang fund raising ito. here are the images, sorry mahirap i-3d ang strada natin puro curves kaya humugot na lang ako ng ibang 3d image ng pickup:

**Bertobol** · January 24th, 2011 07:20 PM

Originally Posted by G01

Installation completed

Smart gauge

Boost gauge

wow! parang cockpit ng jet fighter!

yung gustong mag piloto or big fan ng top gun, will surely drool on this.
panyo nga pala pls... hehe..

**dadz** · January 24th, 2011 09:22 PM

Dyno result of the Injectors Performance chip.........
It have 5 micro chip and a micro selector for 1 to 16 preset program.
1 to 4 is use for stock
5 to A is use for turbo upgrade 35 to 45 Psi
B to F is use for turbo upgrade 50 to 60 Psi

Gain from stock is
Corrected HP is plus 78 (209HP) - 131 stock HP
Engine Hp is plus 76 (206 HP) - 130.1 stock HP
Wheel is plus 67 (156 HP) - 88.9 Stock HP
Torque is plus 172 lbs (517 nm) - 345.1 nm

In the graph you will see the smooth transfer of power. This chip increese the injector pressure to give you an optimum performance.

One wire needs to be cut to open the boost cut control and the power to be tap in the ignition.

**jashty_enzo** · January 24th, 2011 10:27 PM

Our simple Mods

**chua_riwap** · January 24th, 2011 10:52 PM

^ Ayos!

**nanofossil** · January 24th, 2011 10:55 PM

Originally Posted by Pol-pol

[SIZE=3]
Sir Nano,

*sir G01 pala earlier made the same suggestions.

Kung hindi engraving baka pwede yung naka-molde? Parang belt buckle? Baka kailangan i-outsource ito sa Thailand or China?

Baka pwede din na resin na lang or something more sturdy?

I think meron foundry sa Rizal Avenue, Caloocan bandang 3rd - 5th Avenue. Yung molde na lang.

Like ko yan, sinugest ko din kay manong yan. Baka CNC machine pwede?
[/SIZE]

CNC ba kamo? umorder na si bigblock! ok ang sinuggest mo atty, dual purpose! sa mga walang tow hitch receiver eh gawing belt buckle na lang hehehehe.

seriously atty, maybe we can discuss more about this project.