Had a canon all in one whose printhead clogged up after 2 years. The printhead needed to fix it cost 4.5k. With all that I've printed with it, I would have consumed the cost of a printhead the same amount in ink of an HP printer in 2 years.
If you print a lot, I think it is safe to get either canon or epson, otherwise, get an HP. With an HP, you get a new printhead builtin with every ink purchase. You can also have the HP refilled till the printhead on the ink cartidge lasts.
bought a brothers 4-1 printer last night. easy to setup. our only problem eh hindi pala pwede mag print ng long bond paper. hanggang A4 lng sya. eh ung long bond pa nmn kailangan nmin.
Have you tried feeding it long bond and just printing? I have printed several sheets of long bond with my DPC-215C. Although the contents were enough to fit in a short bond. I used long since it was all I had. I also did not bother changing the paper size on the software.
That's weird, hindi po pwede talaga ang Long? As in, Stated in the Manual na hindi pwede? first time ko ata makarinig ng ganyan... Mas payat kasi ang long and it only requires the printer to adjust the paper end.
Weird nga po eh. sabi nga ni wifey eh un lng ang printer na hindi pwede magprint ng long bond paper. Ilang beses ko inulit basahin ung manual, walang included na long paper sa list ng compatible paper types.....although wala nmn naka specify dun na hindi talaga pwede mag print gamit ang long bond paper....problema kc eh ung paper tray may takip then kailangan mo isalpak sa printer....the thing is hindi na maisara ung takip ng paper tray pag long paper ung nilagay (A4 ung pinakamahaba na pwede). pag nd naisara ung takip ng maayos -> hindi pwede isalpak sa printer -> hindi ka makapag print hindi kc katulad ng iba na open ung dulo ng paper tray...try ko nga kalikutan kung pwede alisin ung takip ng tray
buti na lng pumayag warehouse store na ipalit ung 500 sheets ng long paper sa A4. hehehe