Split Type Aircon: Which is best?

[willownavarro]

Going ahead with 2 units of Daikin instead of Kolin and LG, wish me luck!

Sent from my CLT-L29 using Tapatalk

[dr. d]

Going ahead with 2 units of Daikin instead of Kolin and LG, wish me luck!

Sent from my CLT-L29 using Tapatalk

we wish you the best of luck.

[Walter]

Daikin is a good brand ...

[attorney]

My aircon installer said last year he installed more than 300 units. Daikin has no back job and the parts are really superior compared to other brands.


Sent from my iPhone using Tapatalk

[StockEngine]

with our tropical weather, humidity is high, baka nga yun drain clogged.

Sent from my SM-G935F using Tapatalk

[shadow]

Tulo lang problema wala naman ibang gagalawin diyan Either clogged nga yun Drain or hinde na mabait mabuti yun Drain pan sa Drain hose, or nawala sa pitch yun A/C


Sent from my iPhone using Tapatalk

[kkreuk18]

After 8 years bumigay na un main board at receiver ng carrier xpower. 9k ang naubos. Tinakot pa ko ng ac technician na nakontak ko. Mga 15k daw cost ng board. Kaya tumawag ako mismo sa carrier.
Nasira after magbrown out tapos nagkaron ng kuryente ulit.

Sent from my Redmi Note 5 using Tapatalk

[StockEngine]

After 8 years bumigay na un main board at receiver ng carrier xpower. 9k ang naubos. Tinakot pa ko ng ac technician na nakontak ko. Mga 15k daw cost ng board. Kaya tumawag ako mismo sa carrier.
Nasira after magbrown out tapos nagkaron ng kuryente ulit.

Sent from my Redmi Note 5 using Tapatalk

parang input stage lng.. normally the logic circuit is waiting for the low voltage dc supply from the input stage.

Sent from my SM-N960F using Tapatalk

[kkreuk18]

parang input stage lng.. normally the logic circuit is waiting for the low voltage dc supply from the input stage.

Sent from my SM-N960F using Tapatalk

May nabasa ako na mejo mahina nga daw ang carrier pag nagkaron ng power surge

Sent from my Redmi Note 5 using Tapatalk

[StockEngine]

bro the input stage can be repaired by some shops.



How To Repair PCB PRINTED CIRCUIT BOARD Of window and split ac Introduction - YouTube

Sent from my SM-N960F using Tapatalk

[kkreuk18]

Pede pa nga siguro. Hay... Itinabi ko na lang.

Sent from my Redmi Note 5 using Tapatalk

[jut703]

I need an aircon for my room. Already has a hole for a window type but my contractor can cover it up and convert to split type.

Panasonic's 1hp split type inverter is 26k including installation. Their window type inverter is 28k.

Any reason why I should go for window type over split type?

If split type, compressor will be at the balcony right beside the split type ACU so maintenance shouldn't be an issue.

Sent from my SM-G950F using Tapatalk

[travajante]

I need an aircon for my room. Already has a hole for a window type but my contractor can cover it up and convert to split type.

Panasonic's 1hp split type inverter is 26k including installation. Their window type inverter is 28k.

Any reason why I should go for window type over split type?

If split type, compressor will be at the balcony right beside the split type ACU so maintenance shouldn't be an issue.

Sent from my SM-G950F using Tapatalk

Window can be swapped DIY in minutes, sir. Easier & less mess to clean, too. Most designers would recommend split to clients for looks & silence. Ironically, most I know & work with use window whenever they can in their own homes.[emoji13]

Sent from my SM-G950F using Tapatalk

[jut703]

Window can be swapped DIY in minutes, sir. Easier & less mess to clean, too. Most designers would recommend split to clients for looks & silence. Ironically, most I know & work with use window whenever they can in their own homes.[emoji13]

Sent from my SM-G950F using Tapatalk

Yeah I prefer looks and silence over ease of maintenance. Wala naman ako balak mag-DIY. No fun in cleaning aircons for me.

So split type?

Sent from my SM-G950F using Tapatalk

[travajante]

Yeah I prefer looks and silence over ease of maintenance. Wala naman ako balak mag-DIY. No fun in cleaning aircons for me.

So split type?

Sent from my SM-G950F using Tapatalk

ACs breakdown & will periodically need swapping. These are the moments one would wish window instead of split. Downtime is short w/ no extra hands needed. If you decide split, don't embed the lines.
It's really lifestyle & preference dependent, sir. Having seen homeowner complaints & experience, I lean window more.


Sent from my SM-G950F using Tapatalk

[jut703]

ACs breakdown & will periodically need swapping. These are the moments one would wish window instead of split. Downtime is short w/ no extra hands needed. If you decide split, don't embed the lines.
It's really lifestyle & preference dependent, sir. Having seen homeowner complaints & experience, I lean window more.


Sent from my SM-G950F using Tapatalk

Yeah so pag sira, sabihin natin once every 2 years (conservative pa yan since my 20 year old National split type hasn't needed servicing in over 3 yrs), mas convenient window. Wala naman kaso sakin yung maghintay ng electrician na gagawa - aircons are just a convenience and not a necessity for a good night's sleep.

Pag ayos, so that's 729 days every 2 years, the split type is better since it looks better, runs quieter, and consumes less electricity (13.4 EER vs 10.6 for the window). Did I get it right?

Sent from my SM-G950F using Tapatalk

[StockEngine]

Window can be swapped DIY in minutes, sir. Easier & less mess to clean, too. Most designers would recommend split to clients for looks & silence. Ironically, most I know & work with use window whenever they can in their own homes.[emoji13]

Sent from my SM-G950F using Tapatalk

windows can be quiet after it reaches the target temp, regulating it will depend on the insulation and leakage of the room.

[travajante]

windows can be quiet after it reaches the target temp, regulating it will depend on the insulation and leakage of the room.

Compressor won't be off all the time.[emoji4] I'm not 1 bothered by AC noise nor looks. I push more than discourage window where allowed.[emoji106]

Sent from my SM-G950F using Tapatalk

[StockEngine]

Compressor won't be off all the time.[emoji4] I'm not 1 bothered by AC noise nor looks. I push more than discourage window where allowed.[emoji106]

Sent from my SM-G950F using Tapatalk

it wont.. it will run at a few hertz.

[dr. d]

I need an aircon for my room. Already has a hole for a window type but my contractor can cover it up and convert to split type.

Panasonic's 1hp split type inverter is 26k including installation. Their window type inverter is 28k.

Any reason why I should go for window type over split type?

If split type, compressor will be at the balcony right beside the split type ACU so maintenance shouldn't be an issue.

Sent from my SM-G950F using Tapatalk

the only reason i would go split-type, is because i can't install a window-type.
window-type is cheaper and easier.
it's easier and cheaper to install, service, and replace.

when the split type in the workplace malfunctions or needs cleaning, it's a commando operation.

when the window-type needs looking into, they just pull it out, and return it when it is fixed. faster fix, too.

but i am sure, you already know all these.
so why are you considering split type?