Setup for Buffalo Wireless N-finity broadband router and access point.

**rensom** · June 25th, 2009 01:52 AM

Mga parekoy help me naman sa pag setup ng access point ko.... Nag palit kasi ako ng brand kung sa linksys walang problem pero d2 sa Buffalo d2 ako nahirapan. Actually meron siyang default SSID at WEP.... kaya kahit connect mo na lang siya ay ok na ..makaka-connect kana agad... pero ang problem yung SSID is puro number lang at ang haba ng wep... search ka lang at connect enter yung wep ..then ok na...makaka-connect ka na agad. Syempre .. gusto kong makita yung SSID ang name ko at sarili kong wep....ang problema wala sa manual... kung sususndin ko ganoon din lumalabas...
pwde bang matulungan nyo ako?

**Galactus** · June 25th, 2009 09:11 AM

I just bought a Buffalo WHR-300GN last Sunday at Silicon Valley, SM North EDSA. Cheapest Wireless-N router of the lot. 2.7k lang while others were at the 3.4k range.

Just enter the default URL of the router (192.168.11.1). Click the SSID link from the main page, and input your preferred network name. Puwede namang palitan yun. Then click Apply and Complete Settings. Voila!

By default, alam ko WPA-PSK ang encryption standard ng Buffalo routers, especially Wireless-N devices. Mahina kasi ang security protection ng WEP. Same protocols apply with SSID. Just input your preferred password, click Apply then Complete Settings.

**rensom** · June 25th, 2009 07:10 PM

Originally Posted by Galactus

I just bought a Buffalo WHR-300GN last Sunday at Silicon Valley, SM North EDSA. Cheapest Wireless-N router of the lot. 2.7k lang while others were at the 3.4k range.

Just enter the default URL of the router (192.168.11.1). Click the SSID link from the main page, and input your preferred network name. Puwede namang palitan yun. Then click Apply and Complete Settings. Voila!

By default, alam ko WPA-PSK ang encryption standard ng Buffalo routers, especially Wireless-N devices. Mahina kasi ang security protection ng WEP. Same protocols apply with SSID. Just input your preferred password, click Apply then Complete Settings.

Thanks...parekoy... naayos ko na Parehas tayo ng model.... yung nabili ko sa octagon ng 3K.... 2 Thumbs up sa akin itong router/access pont na ito... lakas ng signal at mas mabilis sa dati kong access pt. na Linksys wap-54G...
Thanks uli.. mhwa