New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 3 of 4 FirstFirst 1234 LastLast
Results 41 to 60 of 75
  1. Join Date
    Oct 2008
    Posts
    1,958
    #41
    Quote Originally Posted by ghosthunter View Post
    wait a minute (duh!) ... have you tested the modem by directly connecting it to your computer? If it's working, then assume the problem is the router, either the configuration is wrong or the router is defective. Either way, it's hard for someone (like me) to diagnose via forum discussion.

    Are you nor familiar enough to fiddle around in the router's basic connection settings?
    i may sometimes relate with my laptop via synergy, most often, i have a good time working with it... but honestly, i don't know my laptop that much...heheheh...i guess the connections are simpler...connected but the router can't detect any...

  2. Join Date
    Jan 2008
    Posts
    337
    #42
    ^^ Try to isolate the problem..Remove the router, connect modem directly to computer..

    My experience with WRT54Gbeen using for 5yrs w/o major problems)
    - firmware upgrade to fix bugs
    - Poor ventilation causes overheating and stalls the device
    - Adaptor is Transformer type(not auto volt), if commercial power sags, chances are youll get DC or causes router to hang.. Connect adaptor to line interactive UPS or better replace adaptor w/ switching type 12VDC 1A.
    Also set modem lease time to max..You will get DC if lease time expires and reset would solve the problem temporarily. Ask isp to replace modem for isolation purposes.

    Overall ok naman ang linksys though performance is not as good as hardened-carrier grade device. For small-office-home-office use lang talaga

  3. Join Date
    Oct 2002
    Posts
    29,354
    #43
    Quote Originally Posted by ab_initio View Post
    i may sometimes relate with my laptop via synergy, most often, i have a good time working with it... but honestly, i don't know my laptop that much...heheheh...i guess the connections are simpler...connected but the router can't detect any...
    If thats the case, you might have no other recourse but to request for an onsite technical assistance to resolve your connection problems quickly.

  4. Join Date
    Oct 2008
    Posts
    1,958
    #44
    ^^ Thanks mga Sirs!!!

  5. Join Date
    Mar 2009
    Posts
    142
    #45
    hi,

    yung router ko pag sa laptop using wireless ok sya pag nag kabit na ako sa cable pa punta sa desktop coming from router indicate nya connected pero wala sya internet.set up modem pa punta sa lnksys ko 4 lights ang nailaw... help po thx

  6. Join Date
    May 2007
    Posts
    2,127
    #46
    feedback naman po about Linksys WRT54G wireless router... ok po ba ito? plano ko po kasi mag setup ng wireless connection sa bahay. TIA

  7. Join Date
    Oct 2002
    Posts
    29,354
    #47
    You might want to configure the router for the type of internet connection you are using. Example, static IP, dynamic IP, PPOE, etc.

    If you don't know what I am talking about, try reading the quick guide that comes with the Linksys router.

  8. Join Date
    Oct 2008
    Posts
    1,958
    #48
    ^^ meron na po existing thread nito.


    http://tsikot.yehey.com/forums/showt...t=56997&page=2

    HTH

  9. Join Date
    Oct 2002
    Posts
    29,354
    #49
    Quote Originally Posted by liv View Post
    feedback naman po about Linksys WRT54G wireless router... ok po ba ito? plano ko po kasi mag setup ng wireless connection sa bahay. TIA
    Personal experience, the router fails around a year after using it. I had four routers (shops, home, office) and they typically failed to function normally after six months to 1.5 years.

    I replaced ALL of my routers with TP-LINK brand wifi routers. No problems at all. Even my brother's friend and in-laws have taken my advise and used TP-LINK routers. It's quite affordable at P1,400 for a 4-port wifi B/G 54mbs router.

    BTW, I suggest you invest into wifi-N standard routers for the added speed and range. Even if your current devices aren't "N" standard, at least you can have the option for it anytime you want.

  10. Join Date
    Oct 2002
    Posts
    29,354
    #50
    Quote Originally Posted by ab_initio View Post
    ^^ meron na po existing thread nito.


    http://tsikot.yehey.com/forums/showt...t=56997&page=2

    HTH


    [SIZE="5"]Moderator's note: Threads merged[/SIZE]
    Last edited by ghosthunter; March 23rd, 2009 at 02:27 PM.

  11. Join Date
    Aug 2005
    Posts
    2,343
    #51
    Quote Originally Posted by liv View Post
    feedback naman po about Linksys WRT54G wireless router... ok po ba ito? plano ko po kasi mag setup ng wireless connection sa bahay. TIA
    I never had any problem with my Linksys (same model in Q) router for almost a year now. I got only brief interrupted conn due to ISP's upgrades and technical enhancements (sabi nila). I haven't upgraded yet the firmware though it still is working fine and I don't want to mess it up knowing some bugs during firmware upgrades. I also use the wifi function with my lappy and N80. Just configured the WEP sec functions and p2p port forwarding. Other than that, it's working fine as it should be.

  12. Join Date
    Oct 2002
    Posts
    21,433
    #52
    After reflashing my WRT54G to the newest firmware available in their website, I have never rebooted the router again. Oks na sya.

  13. Join Date
    Jan 2008
    Posts
    337
    #53
    ^^Gud to hear sir. I also updated my FW with 4 Linksys AP devices last month. Usually out from the box, icheck for updates and flash it before using.

    Guys, hav you encountered this aa(airborne access) Linksys WRT54GL? Im planning to flash it with DDRT Firmware, problem is aa's OpenWRT console has no link button to FirmWare upgrade. Does anybody know how to flash this thing?

  14. Join Date
    Mar 2009
    Posts
    142
    #54
    hi,

    have pldt dsl with zyxel modem p600 here is my problem. when im using my wireless router on my laptop via wifi its ok... when i plug cable to its port and use it on my desktop it show connection but no internet i try to reset but still the same.. my modem has 4 lights on it... i wonder why on wifi its ok and on cables its not on all port... thx

  15. Join Date
    Jun 2006
    Posts
    6,104
    #55
    What is your router? have you enabled DHCP? Are you sure the LAN patch cable is good?

  16. Join Date
    Mar 2009
    Posts
    142
    #56
    Quote Originally Posted by Horsepower View Post
    What is your router? have you enabled DHCP? Are you sure the LAN patch cable is good?

    yup,cable is good i drect use it to my laptop it works...

  17. Join Date
    Nov 2008
    Posts
    115
    #57
    Quote Originally Posted by hans sebastian View Post
    hi,

    have pldt dsl with zyxel modem p600 here is my problem. when im using my wireless router on my laptop via wifi its ok... when i plug cable to its port and use it on my desktop it show connection but no internet i try to reset but still the same.. my modem has 4 lights on it... i wonder why on wifi its ok and on cables its not on all port... thx
    Try configuring or setting-up your desktop for the new internet connection.

  18. Join Date
    Mar 2009
    Posts
    142
    #58
    Quote Originally Posted by ManicMan View Post
    Try configuring or setting-up your desktop for the new internet connection.

    still the same,

    anyone knows customer service number nila yung toll free sa philippines? thx

  19. Join Date
    Oct 2002
    Posts
    29,354
    #59
    This might sound stupid but have you enabled your wifi at both ends? (laptop and router)

    Did you configure the router's wifi setup properly? Did you do a test without the wifi security enabled?

  20. Join Date
    Oct 2002
    Posts
    29,354
    #60
    Quote Originally Posted by hans sebastian View Post
    still the same,

    anyone knows customer service number nila yung toll free sa philippines? thx
    You can check the official website: http://www.linksys.com/ph/

Page 3 of 4 FirstFirst 1234 LastLast
Linksys WRT54G problem [merged threads]