HELP!!! may ground cpu casing ko

**step22** · September 21st, 2008 06:11 PM

bakit ganun basta may hawakan me na metallic part sa pc ko nagagaround ako. pati flash drive di ko maisaksak ng walang sapin na tela. ano po gawain para maalis ground. tnx

**1D4LV** · September 21st, 2008 06:45 PM

tinanggal mo ba yung parang etits sa powercord nya? grounding kasi yun eh.
kung tinanggal mo, try to get a new powercord na may etits.

**flakez** · September 21st, 2008 06:49 PM

ganyan din sakin minsan. subukan mong lagyan ng insulator don sa may screw ng motherboard and casing. tape or anything para lang walang direct contact. saka linisin mo na rin maigi yung loob. minsan dahil din sa mga alikabok eh. heheh.

**step22** · September 21st, 2008 08:24 PM

Originally Posted by 1D4LV

tinanggal mo ba yung parang etits sa powercord nya? grounding kasi yun eh.
kung tinanggal mo, try to get a new powercord na may etits.

wala naman po ganun sa power cord ko ang alam ko ref lang at washing machine meron nun hehe

**step22** · September 21st, 2008 08:31 PM

Originally Posted by flakez

ganyan din sakin minsan. subukan mong lagyan ng insulator don sa may screw ng motherboard and casing. tape or anything para lang walang direct contact. saka linisin mo na rin maigi yung loob. minsan dahil din sa mga alikabok eh. heheh.

nagawa ko na po meron pa din ground nakakagulat nga. anything thats attached to my cpu speaker printer avr etc kahit ano basta may metallic magaground ka.

**1D4LV** · September 22nd, 2008 09:19 AM

Originally Posted by step22

wala naman po ganun sa power cord ko ang alam ko ref lang at washing machine meron nun hehe

meron po dapat yan.

**CVT** · September 22nd, 2008 09:47 AM

Something in your power supply may be causing it. Your chassis should have no voltage (potential) on it. The ground line on your power cable is useless if your power source has no grounding line....

6707:choir:

**bmacavanza** · September 22nd, 2008 10:17 AM

[SIZE=3]Sir[/SIZE]
[SIZE=3][/SIZE]
[SIZE=3]What you are experiencing is static electricity. [/SIZE]
[SIZE=3][/SIZE]
[SIZE=3]To remove that you must bond your self to the equipment.[/SIZE]
[SIZE=3][/SIZE]
[SIZE=3]Try to browse the web for the solution.[/SIZE]
[SIZE=3][/SIZE]
[SIZE=3]Thanks[/SIZE]
[SIZE=3][/SIZE]
[SIZE=3]my email is bmacavanza*gmail.com[/SIZE]

**rion** · September 22nd, 2008 01:19 PM

usually, it's the power supply that is grounded. your printer, soundsystem, etc will be grounded when touched in the metallic area too. it can be alternatively remedied with adding ground from your pc casing to the dirt. however, if you touch the casing this time, there is a feel of electromagnetic in the casing. but it doesn't give the bee sting anymore.