New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 59
  1. Join Date
    Oct 2002
    Posts
    29,354
    #21
    Quote Originally Posted by Horsepower View Post
    Can this accomodate motorized appliances like an AC? I'm just curious how much electricity per mode/temp consumes.
    Not sure, but it has a maximum capacity of 3000 watts.


    also does it have some sort of periodic monitor wherein for X number of time (h;d) this is the consumption?

    Thanks ^_^
    Yes it has a Kw/hr feature which tells you the actual amount of power your plugged-in device has consumed over the X period of time.

  2. Join Date
    Jan 2009
    Posts
    6,450
    #22
    My Panasonic 1.5HP Inverter split uses 1W in off/standby. During operation, it runs anywhere between 20W (with just the indoor blower running at speed 1) to 960W when it's in full blast (Blower speed 5 and temp set to 16C). The increase or decrease in power consumption (as inherent with most inverter types) is very gradual. It takes something like 3 or so mins. from 1W to 960W. There's no sudden in-rush of current.

    With the compressor running at the slowest RPM (presumably), the consumption is about 80W.

    But typically, with our usual setting of speed 1 and temp set to 26C, I observed that the power consumption goes anywhere between 20W to <500W and sits around 200-300W on average. It's hard to keep track of the output because of the variable-speed compressor. It more often reaches the high mark if people enter or leave the room frequently.

    If I may add, I have a quad-core PC running in the same room 24x7. That would probably account for some additional dry heat.
    Last edited by oj88; November 22nd, 2010 at 01:03 PM.

  3. Join Date
    Jun 2006
    Posts
    2,605
    #23
    oj88,

    how did you measure your panasonic aircon electric consumption? Hindi ba split type aircons are wired directly to the circuit breaker.

  4. Join Date
    Jan 2009
    Posts
    6,450
    #24
    Quote Originally Posted by userfriendly View Post
    oj88,

    how did you measure your panasonic aircon electric consumption? Hindi ba split type aircons are wired directly to the circuit breaker.
    The indoor unit has the standard 3-prong plug. The outdoor unit is wired to the indoor unit. The indoor unit powers/controls the outdoor unit.

  5. Join Date
    Oct 2010
    Posts
    2,639
    #25
    Quote Originally Posted by oj88 View Post
    My Panasonic 1.5HP Inverter split uses 1W in off/standby. During operation, it runs anywhere between 20W (with just the indoor blower running at speed 1) to 960W when it's in full blast (Blower speed 5 and temp set to 16C). The increase or decrease in power consumption (as inherent with most inverter types) is very gradual. It takes something like 3 or so mins. from 1W to 960W. There's no sudden in-rush of current.

    With the compressor running at the slowest RPM (presumably), the consumption is about 80W.

    But typically, with our usual setting of speed 1 and temp set to 26C, I observed that the power consumption goes anywhere between 20W to <500W and sits around 200-300W on average. It's hard to keep track of the output because of the variable-speed compressor. It more often reaches the high mark if people enter or leave the room frequently.

    If I may add, I have a quad-core PC running in the same room 24x7. That would probably account for some additional dry heat.
    sir, how about your PC plus the monitor.. how much power it draws po? thanks!

  6. Join Date
    Sep 2008
    Posts
    779
    #26
    so you have measrued only the evaporator side? kaya pala maliit ang wattage.

    Quote Originally Posted by oj88 View Post
    The indoor unit has the standard 3-prong plug. The outdoor unit is wired to the indoor unit. The indoor unit powers/controls the outdoor unit.

  7. Join Date
    Jan 2009
    Posts
    6,450
    #27
    Quote Originally Posted by bmacavanza View Post
    so you have measrued only the evaporator side? kaya pala maliit ang wattage.
    Wrong! Please re-read my post.

    The outdoor unit is wired to the indoor unit, nowhere else. The outdoor unit gets power and control from the indoor unit.

    (AC Plug)------ (Indoor Unit)=========(Outdoor Unit)


    Legend:
    ---- (AC Cord with standard 3-prong plug)
    === (Three-conductor control and power wire for the outdoor unit)

  8. Join Date
    Dec 2005
    Posts
    39,174
    #28
    Quote Originally Posted by oj88 View Post
    My Panasonic 1.5HP Inverter split uses 1W in off/standby. During operation, it runs anywhere between 20W (with just the indoor blower running at speed 1) to 960W when it's in full blast (Blower speed 5 and temp set to 16C). The increase or decrease in power consumption (as inherent with most inverter types) is very gradual. It takes something like 3 or so mins. from 1W to 960W. There's no sudden in-rush of current.

    With the compressor running at the slowest RPM (presumably), the consumption is about 80W.
    .
    Quote Originally Posted by oj88 View Post

    The outdoor unit is wired to the indoor unit, nowhere else. The outdoor unit gets power and control from the indoor unit.

    (AC Plug)------ (Indoor Unit)=========(Outdoor Unit)


    Legend:
    ---- (AC Cord with standard 3-prong plug)
    === (Three-conductor control and power wire for the outdoor unit)
    Yup,- 960W is "indicative" of 1.5HP rating.....

    11.4K:eathis:

  9. Join Date
    Jun 2006
    Posts
    6,104
    #29
    Thanks OJ88 for patiently answering my Qs.

    I'd have a field day with this thing.

    ----

    thanks also GH!
    Last edited by Horsepower; November 24th, 2010 at 05:34 PM.

  10. Join Date
    Sep 2008
    Posts
    779
    #30
    Thank you for clarifying

  11. Join Date
    Oct 2002
    Posts
    29,354
    #31
    Damned!!

    Christmas parol does 120 watts to nearly 300 watts during it's blinking cycle.

  12. Join Date
    Jul 2009
    Posts
    639
    #32
    Quote Originally Posted by ghosthunter View Post
    Damned!!

    Christmas parol does 120 watts to nearly 300 watts during it's blinking cycle.
    I think I'll have our family choose between the on/off lights of our parol against hams and keso de bola.

  13. Join Date
    Oct 2002
    Posts
    29,354
    #33
    Quote Originally Posted by bwiseat View Post
    I think I'll have our family choose between the on/off lights of our parol against hams and keso de bola.
    Actually, if you consider that the lighted parol will be turned-on only a few hours per night (example = 6:00pm to 9:00pm), it is not that much. But if you plan to leave it on until morning, well iba na yun.

  14. Join Date
    Jul 2009
    Posts
    639
    #34
    Quote Originally Posted by ghosthunter View Post
    Actually, if you consider that the lighted parol will be turned-on only a few hours per night (example = 6:00pm to 9:00pm), it is not that much. But if you plan to leave it on until morning, well iba na yun.
    Yun na nga sir GH. They tend to forget turning it off that I have to do it myself when I get home early the next morning.

  15. Join Date
    Dec 2005
    Posts
    39,174
    #35
    Quote Originally Posted by ghosthunter View Post
    Actually, if you consider that the lighted parol will be turned-on only a few hours per night (example = 6:00pm to 9:00pm), it is not that much. But if you plan to leave it on until morning, well iba na yun.
    At that schedule, bro... That would be almost 1KW-Hr worst case a night.....

    11.4K:eathis:

  16. Join Date
    Oct 2002
    Posts
    29,354
    #36
    Quote Originally Posted by bwiseat View Post
    Yun na nga sir GH. They tend to forget turning it off that I have to do it myself when I get home early the next morning.
    If that is the case, I have the perfect product for you.

    CD-R King Digital Timer

    http://www.cdrking.com/?mod=products...d=6223&main=52


    http://www.cdrking.com/?mod=products...d=2710&main=52


    I am actually using these timers at the office and at home.

    The security lights at the office are switched on and off using these timers.

    At home, since I have my own condo, I have the timers switch on some lights around the place so I don't get home to a totally dark home. I also have my ref on the timer (off between 1am to 5:00am), hoping to save some pesos in electric bills.
    Last edited by ghosthunter; November 25th, 2010 at 04:35 PM.

  17. Join Date
    Dec 2005
    Posts
    39,174
    #37

    ^^^ Hahaha!

    Wala kang lusot sa CDR King,- ang galing nila!....

    11.4K:eathis:

  18. Join Date
    Oct 2002
    Posts
    6,385
    #38
    Quote Originally Posted by CVT View Post

    ^^^ Hahaha!

    Wala kang lusot sa CDR King,- ang galing nila!....

    11.4K:eathis:
    Hehehe! They've got all sorts of gadgets.

    BTT: Thanks for info on the digital power reader. Gotta remember to get one when I pass by Ace or TruValue. Was near one na kanina, just forgot to pass by.

  19. Join Date
    Dec 2005
    Posts
    39,174
    #39

    Walandyo,- 3 ng ACE Hardware ang pinagtanungan ko niyan dito sa SouthMM (ATC, SouthMall, Hypermart Center LPC), wala silang stock! (Baka inubos na ng mga Tsikoteers?....)

    11.4K:eathis:

  20. Join Date
    Oct 2002
    Posts
    29,354
    #40
    Quote Originally Posted by CVT View Post

    Walandyo,- 3 ng ACE Hardware ang pinagtanungan ko niyan dito sa SouthMM (ATC, SouthMall, Hypermart Center LPC), wala silang stock! (Baka inubos na ng mga Tsikoteers?....)

    11.4K:eathis:
    I bought mine at Ace Hardware in sm megamall. An attendant also mentioned meron daw sa Market Market branch ng Ace.

    Or last resort, buy yours through the ads in SULIT.COM.

Page 2 of 3 FirstFirst 123 LastLast
GADGET: OMNI Digital Power Reader