Results 21 to 25 of 25
-
Tsikoteer
- Join Date
- Oct 2002
- Posts
- 370
July 10th, 2003 11:21 PM #21It's probably the same.
You can tell the difference between a VATN turbine & standard turbine by where the actuator for the waste gate is located.
On the Nissan, the actuator is in the middle of the compressor & turbine side of the turbo, oriented perpendicular to the turbine shaft axis.
On most standard turbine the awastegate actuator is parallel to the turbine shaft axis.
VATN-variable area turbine nozzle.
Instead of a wastegate the are vanes which move & change the effective size of the turbine.
When there is low or little exhaust pressure the vanes are closer/almost touching the turbine blades.
This enables the turbine to spin/spool faster & build boost at a lower rpm.
As exhuast gas pressure increases, the vanes move away from the turbine making it act like a "bigger" turbine, slowing down or maintaining the turbine speed & regulating boost.
In effect the VATN acts like a wastegate but with the added benefit of quick spool & boost at a relatively low rpm.
I only wish I had a pic available to make it easier to explain.
Trivia bit, the VATN has been around for almost if not more than 10 years, I first encountered it back in 93-94.
At the time it was at least twice the cost of a standard turbo.
Due to it cost very few turbo system developers supported it.
Back then, it was found mostly on modded motorcycles.
A few years ago, Garrett(either bought the rights to it or the patent had expired, I don't know which) introduced a VATN turbo into their product line.
Of the few auto turbo systems makers that did support it, one stands out in my mind.
On the Bell Eng'g turbo system for the 1.6 Miata, it made 6PSI of boost at 2000RPM with boost maxxing out on the system at 8psi.
At that setting, the BEGI turbo system made 250HP(iirc) up quite a bit from the Miata's then stock output of 110-120hp range.
-
July 24th, 2003 01:24 AM #22Originally posted by splerdu
Another form of Anti-Lag puts a dedicated injector and sparkplug in the manifold, so the turbine can be spun for even longer off-throttle periods. Problem with anti-lag is the wear on the turbine itself. You'll have to treat your car like WRC, and rebuild the turbine every 500-1000km.
quote from garret: Twin-Scroll
By utilizing dual openings, or volutes, into the turbocharger's turbine housing, exhaust energy is optimized which results in better engine performance at low speeds, decreased backpressure at high speeds, and significant gains in fuel economy.
di ba the cooler the air, the more dense it becomes kaya more air molecules ang magkakasya sa combustion chamber kung malamig ang hangin. if what you're saying is true, e di wala rin silbi ang mga cold air intakes?
advisable on NA car but CAI is known to lean out your A/F for F/I engine. Having said that, most of us, WRX owners, uses a SRI with silicone intake arm.
-
Tsikot Member
- Join Date
- Oct 2015
- Posts
- 3
October 3rd, 2015 11:12 AM #23Do you have any idea why when the supercharger of my 4agze lights up (works), my exhaust sounds mess like a gutling gun then the rpm decreases. Therefore, the power is wasted.
Initial diagnosis is the fuel pump.
-
Verified Tsikot Member
- Join Date
- Jul 2018
- Posts
- 7
July 23rd, 2018 07:24 PM #24
-
Verified Tsikot Member
- Join Date
- Aug 2018
- Posts
- 28
August 1st, 2018 04:23 PM #25A supercharger is typically a belt driven compressor that force feeds air into the motor. This causes some parasitic loss but allows the power to be introduced gradually and more manageable to an inexperienced driver. Furthermore, due to the inherent nature of a supercharger they are slightly easier to tune and install than an equivalent turbo charger. (There are electric superchargers and other but we can ignore them for now.)
Turbochargers are compressors that run off of the exhaust of the engine. Spinning a turbine that draws in either outside air to be compressed into the engine. With the right set up a turbo charger would be more efficient and powerful than an equivalent supercharger. However, this comes at a cost of Turbo lag, or the time the turbos take to spool up to compressing speeds. Overboost, or when the turbos force too much air into the cylinders although now we have blow off valves to guard against that, and oversteer caused by the onset of too much boost.
Be careful with channels like "China Observer" on YouTube. There is a clear bias in their posts and...
Xiaomi E-Car