OFF-ROAD KING: 'The Beast'

**fierari** · April 29th, 2003 04:27 PM

ungas,

padrive naman nyan. tutal mag kapit bahay naman tayo :mrgreen:

**kimpOy** · April 29th, 2003 04:30 PM

2.1m ba sa motel?

ungas kasya ka pa rin ba?

basta kasya ka, kasya ako he..he

**Ungas** · April 29th, 2003 07:22 PM

Originally Posted by fierari

ungas,

padrive naman nyan. tutal mag kapit bahay naman tayo :mrgreen:

Oo ba! Anytime, basta wala akong lakad. :D

Originally Posted by kimpOy

2.1m ba sa motel?

ungas kasya ka pa rin ba?

basta kasya ka, kasya ako he..he

Some establishments are only 1.9m, hindi na ako kasya dun. One thing for sure yung VC merong 2.2m vertical clearance medyo mahal nga lang pero siguradong pasok. :mrgreen:

**kiper** · April 29th, 2003 08:55 PM

naku.. kahit hindi na umabot sa VC.. pasok ka pa ren.. luwag ng likod ng patrol.. ehehehe..:mrgreen::roll::twisted:

**odell** · April 29th, 2003 11:14 PM

Originally Posted by Ungas

Originally Posted by GlennSter

if afrasay is the beast junior.....

and you are the beast.............

CAN I BE YOUR BEAUTY!?!?!:roll::lol:

Hahaha! Beauty ba kamo? Sige you'll be our muse! :mrgreen:

Originally Posted by odell

i mean.. kasi db may lift na mahirap na un tipong indi na tlga kaya sa road..

siguro u thing na lang na pnakamataas na lift.. hehehehe

kulit e nh?..

lahat ba ng lift is through sprngs lang?

Walang mahirap na lift basta kumpleto sa lifting components. Lahat naman kaya ng roads your actual limit will have to be on your clearance height for most shopping malls and overnight motels which has a 2.1m limit on vertical clearance. Though some are worse with 1.7 - 1.9m vertical clearance.

As for your second question, I think nasagot na ni Skywalker about your lifting question. :D

Originally Posted by Skywalker

Ungas,

Nice rig.

Thanks bro! :D

skywalker,
wala pa ho ako 4x4 ehh.. just wana know things.. hehehe.. :lol:
planning on having one kasi.. sedan pa oto ko now.. :D

pag 3 inch ho ba no more other mods except un springs? :?:

ungas,
un lift mo magkano gastos.. including shocks mo na bilstein and springs..? :?:

**OTEP** · April 30th, 2003 12:18 AM

odell,

Depende iyan sa rig at sa budget mo. Sa Pajero going more than 2" is difficult already dahil sa design ng suspension.

Kung nagtitipid ka, you can use spring spacers instead of getting new springs. Then just use the stock shocks or KYB's.

**Ungas** · April 30th, 2003 09:30 AM

I achieved the 70mm by 22K for all 4 corners of Bilstein shox, an estimated 15K for the heavy duty TJM coils.

I could say the limit could be 3 inch for other vehicles without any major part modifications. Yung sasakyan ko hanggang dun na lang. Higher than the lift I have now would mean adjusting panhard rods, anti-sway bars, steering adjustments, another caster bushing adjustments, cross joints, etc.