OFF-ROAD KING: 'The Beast'

[fierari]

ungas,


padrive naman nyan. tutal mag kapit bahay naman tayo :mrgreen:

[kimpOy]

2.1m ba sa motel?

ungas kasya ka pa rin ba?

basta kasya ka, kasya ako he..he

[Ungas]

ungas,


padrive naman nyan. tutal mag kapit bahay naman tayo :mrgreen:

Oo ba! Anytime, basta wala akong lakad. :D

2.1m ba sa motel?

ungas kasya ka pa rin ba?

basta kasya ka, kasya ako he..he

Some establishments are only 1.9m, hindi na ako kasya dun. One thing for sure yung VC merong 2.2m vertical clearance medyo mahal nga lang pero siguradong pasok. :mrgreen:

[kiper]

naku.. kahit hindi na umabot sa VC.. pasok ka pa ren.. luwag ng likod ng patrol.. ehehehe..:mrgreen::roll::twisted:

[odell]

if afrasay is the beast junior.....

and you are the beast.............

CAN I BE YOUR BEAUTY!?!?!:roll::lol:

Hahaha! Beauty ba kamo? Sige you'll be our muse! :mrgreen:

i mean.. kasi db may lift na mahirap na un tipong indi na tlga kaya sa road..

siguro u thing na lang na pnakamataas na lift.. hehehehe

kulit e nh?..

lahat ba ng lift is through sprngs lang?

Walang mahirap na lift basta kumpleto sa lifting components. Lahat naman kaya ng roads your actual limit will have to be on your clearance height for most shopping malls and overnight motels which has a 2.1m limit on vertical clearance. Though some are worse with 1.7 - 1.9m vertical clearance.

As for your second question, I think nasagot na ni Skywalker about your lifting question. :D

Ungas,

Nice rig.

Thanks bro! :D

skywalker,
wala pa ho ako 4x4 ehh.. just wana know things.. hehehe.. :lol:
planning on having one kasi.. sedan pa oto ko now.. :D


pag 3 inch ho ba no more other mods except un springs? :?:


ungas,
un lift mo magkano gastos.. including shocks mo na bilstein and springs..? :?:

[OTEP]

odell,

Depende iyan sa rig at sa budget mo. Sa Pajero going more than 2" is difficult already dahil sa design ng suspension.

Kung nagtitipid ka, you can use spring spacers instead of getting new springs. Then just use the stock shocks or KYB's.

[Ungas]

I achieved the 70mm by 22K for all 4 corners of Bilstein shox, an estimated 15K for the heavy duty TJM coils.


I could say the limit could be 3 inch for other vehicles without any major part modifications. Yung sasakyan ko hanggang dun na lang. Higher than the lift I have now would mean adjusting panhard rods, anti-sway bars, steering adjustments, another caster bushing adjustments, cross joints, etc.

[lc80]

all stock lang lc80 ko... so far steering stab lang pinalitan ko.... yung driver lang yung na modify :mrgreen:

[lc80]

kim,
ganda na nung tjm bumper a.... pwede bawiin? hehe....

[Ungas]

lc80::: Stock daw? Aminin mo na!!! :mrgreen:

[OTEP]

all stock lang lc80 ko... so far steering stab lang pinalitan ko.... yung driver lang yung na modify

DENIAL KING!!! Charing! Stock daw o! :mrgreen:

[tebs]

kaw talaga lc80, minsan ka na lang nga bumalik at magpost dito, lolokohin mo pa kami e! :mrgreen:

[odell]

I achieved the 70mm by 22K for all 4 corners of Bilstein shox, an estimated 15K for the heavy duty TJM coils.


I could say the limit could be 3 inch for other vehicles without any major part modifications. Yung sasakyan ko hanggang dun na lang. Higher than the lift I have now would mean adjusting panhard rods, anti-sway bars, steering adjustments, another caster bushing adjustments, cross joints, etc.

OT lng.. ilan inches un 70mm?. hehehehe :roll:

[ephraim]

2.76 inches

[OTEP]

2.76 inches sa suspension pa lang. Keep in mind that Jon (Ungas) went from 31" tires to 33" (tama ba?) tires. So additional inch din yun.

[Olive Drab]

odell::: Sampatsyaw ka talaga! :mrgreen:

Naalala ko kasi sabi nun sa akin ng Nissan casa kelangan ko na raw palitan pads next 10K km check up kaya inunahan ko na sila. :mrgreen: Mas malinis itong EBC pads compared to oem pads, di gaanong brake dusts.

Parang mas gusto ko itong TJM setup, mas mataas pero firm yung ride. And madaling kausap yung distributor.

Steering stabilizer for added support on steering components, especially to your hands and steering wheel. May function din eto during driving, mas stable ang ride hindi gigiwang-giwang ang manibela.

i think i need that steering stabilizer.
ano ba itsura niyan? yan pa yung horizontally mounted shock absorber?
iba pa ba yan sa steering dampers?
anong effect niyan sa on-road driving?

[Ungas]

2.76 inches sa suspension pa lang. Keep in mind that Jon (Ungas) went from 31" tires to 33" (tama ba?) tires. So additional inch din yun.

Korekek! :D

i think i need that steering stabilizer.
ano ba itsura niyan? yan pa yung horizontally mounted shock absorber?
iba pa ba yan sa steering dampers?
anong effect niyan sa on-road driving?

Yan din yung steering dampers/stabilizer. It is horizontally mounted shock absorber with equal length exntended and compressed for balanced left and right turns.

Greatly reduces sudden steering wheel jolts when potholes are encountered. More stable steering machanisms for trucks.

[lc80]

o cge aaminin ko na nagpalit na ako ng.....





















seatcover!!! :mrgreen:
wala pa talaga ako pinalitan dyan....

[boybi]

Nakuha ni afrasay sa Armark International Corp. pupunta ako dun bukas tatanong kokung meron pang GU series.

na ask mo ba? saan ba yang armark?

[afrasay]

Nakuha ni afrasay sa Armark International Corp. pupunta ako dun bukas tatanong kokung meron pang GU series.

na ask mo ba? saan ba yang armark?

if you're at shaw from edsa turn right ka sa street ng honda cars. straight ka lang nasa right side siya.