New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines



Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. Join Date
    Oct 2002
    Posts
    22,658
    #1
    I think I need a set fabricated for my Pajero. My rocker almost had it once. Saan kaya may makakagawa nito and for how much. I'm still studying the design and specs na kailangan. I'll probably have mine welded to the frame rails.

    Heto nga pala ang sample:


    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  2. Join Date
    Oct 2002
    Posts
    22,658
    #2
    Btw, the image came from http://www.cap510.com/ . Ganda ng TJM bumper niya (walang grille guard).

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  3. Join Date
    Oct 2002
    Posts
    10,603
    #3
    Yet another good offroading pic! Sir O, where do you get these?! Anyway regaring your Q... wala akong alam na gumagawa specifically for the paj (or for any other SUV for that matter) But i think you can remove the stepboards and have someone use the stepboard frame and fabricate something similar.

    hope this helps

  4. Join Date
    Oct 2002
    Posts
    22,658
    #4
    May requirements yung materials niyan, eh. .25" thick steel yata na tubing or pipe. Tapos yung welding specific type din (wala akong alam sa welding, sorry). Sana makahanap ako ng mura lang pero high quality. Put some Rhino Linings on the top half and I've still got a pretty decent stepboard to boot.

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  5. Join Date
    Oct 2002
    Posts
    848
    #5
    ano yung rocker panels?. yun ba yung parang tubo dun sa tabi ng pajero na pix??

    para san yun?.. protection pag nagbobottom out at may nasa side na pwedeng tumama sa ilalim??...paano yun?. pag tinamaan?. eh dun sa weld point nya nde ba yun lulubog?

    and what does TJM mean???

  6. Join Date
    Oct 2002
    Posts
    22,658
    #6
    Yung rocker panels po ay iyong lower tone sa two-tone color ng Pajero. Yung protection po yung tubo sa ilalim ng rocker panels. Basically used for skidding over rocks and stuff kapag nauubusan ng ground clearance.

    Parang pontoons siya ng bangka. May arms siya na nakaweld sa frame ng sasakyan mismo so that it can support the weight of the whole vehicle.

    Very slow lang naman ang contact sa off-roading (since very slow din ang takbo ng sasakyan).

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  7. Join Date
    Oct 2002
    Posts
    848
    #7
    uhm.. if that is the lower part of the two tone.. paano mo iweweld yun sa frame eh di ba pintuan yun?....sensya na.. nangangapa pa sa terminology for offroading....

  8. Join Date
    Oct 2002
    Posts
    22,658
    #8
    Rocker panels po yung gold part ng two tone.


    Ang welded sa frame ay iyong rocker panel protection. Otherwise know as skis or skidbars.

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  9. Join Date
    Oct 2002
    Posts
    848
    #9
    ahh ok... hehehe. kala ko yung rocker panel mismo ang nakaweld...ehhe.thanks... uhm.. nde pa nga pala nasasagot yun TJM.. ano yun?? parang JDM? USDM?

  10. Join Date
    Oct 2002
    Posts
    266
    #10
    ser OTEP,

    ako din, pardon me for my ignorance but what does TJM, JDM and USDM means?

    yo HBOY,

    mas malala ang kaso ko... dehins ko din alam yung dalawa.

Page 1 of 2 12 LastLast
Rocker panel protection...