Results 811 to 820 of 871
-
March 11th, 2011 02:34 PM #811
suzuki equator IS a nissan navara. rebadged, front clip redesigned, as well as different tailgate (wala yun plastic sa handle area). inside the interior is the same as any navara, in gray color nga lang.
...says a lot about suzuki's trust in the navara, don't you think?
-
Tsikoteer
- Join Date
- Nov 2009
- Posts
- 3,507
March 12th, 2011 07:07 PM #812Badge engineering on pickups
Isuzu DMAX = Chevy Colorado
Mazda BT50 = Ford Ranger
Nissan Navara = Suzuki Equator
Nissan Urvan e25 = Isuzu Como
-
-
-
-
May 14th, 2011 04:16 PM #816
Hi guys, Pick-up owner since 2002. Had a 2002 Ford Ranger Trekker that I recently replaced with a 2011 Ford Ranger Trekker.
Current pick-up
2011 Ford Ranger Trekker
Mods:
Carry boy aluminium step tube
Carry boy soft lid
AVT GPS (portable with car kit)
Custom fabricated light bar
Bosch all weather H4 bulbs
Bosch Europa horn
Bosch (pair) 8" Navigator lights converted to HID
Future mods:
replace rims with Rota Grid (white) same 16"
replace Bosch all weather to Philips x-treme power H4
upgrade speakers only
Picture during the 1st day I got it, behind is the 2002 Ranger it replaced:
Current look:
-
-
Verified Tsikot Member
- Join Date
- Feb 2011
- Posts
- 25
May 20th, 2011 08:34 AM #818
-
Verified Tsikot Member
- Join Date
- May 2011
- Posts
- 153
May 27th, 2011 08:55 AM #819Pasali po mga pickup lovers! I own a FOTON Blizzard, base model lang po (4X2 NA).
Hirap sa pickup ko lahat ng puntahan ko walang kasukat na Aftermarket parts (rain Visor, Bed cover, bed liner, etc).
Kaya I need to be resourceful...
It's just a month old kaya wala pa ako kalikot na ginagawa, so far what I did is just put a leatherette seat cover (Chris J) and a customized two fold bed cover (Made of fiberglass). Ginagawa pa lang yung bed cover, I made the design (para mag fit sa needs ko).
Sana maganda kalabasan ng pagkakagawa ng fiberglass, Yung bandang gate nabubuksan ng 45 degrees supported ng hydraulic tube (tama ba), tapos pag kelangan na full open, tatanggalin lang yung hydraulic then lock sya sa half side ng cover. Will post a picture once it's done, baka may mga interested magpagawa.
-
Tsikot Member
- Join Date
- Jun 2011
- Posts
- 3
https://www.autoindustriya.com/auto-industry-news/nissan-confirms-van-partnership-with-mitsubishi-fo...
Mitsubishi Philippines