Results 11 to 12 of 12
-
February 4th, 2003 05:39 PM #11
kiper18,
this is rubbing down the surface of the rotor so that the entire surface will be even, kinda like using rubbing compound on scratched paint...
ginagawa din yan sa clutch disc...
-
Verified Tsikot Member
- Join Date
- Nov 2002
- Posts
- 113
February 5th, 2003 01:55 PM #12Originally Posted by mbt
You're right but rubbing with fine sand paper or emery cloth is the final step after machining a used rotor on the brake lathe.
Brand-new rotors don't need machining but just minor rubbing.
there's this youtube article, about a 2000s altis, that had a high rpm on cold start (2000+ daw),...
high idle RPM at engine start