New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24
  1. Join Date
    Nov 2002
    Posts
    2,059
    #11
    diba you mentioned na tumatagas ang fluid sa master that is why you replaced the rubber cups in the master cylinder? did you check the sides of the master if it is still smooth? or are there any damages that your finger can feel then i suggest you change the whole thing. also check the hydrovac for fluid contamination, since the master cylinder was broken there might be fluid inside the hydrovac, since you mentioned that you were always refilling the reservior but did not mention that there was leaking fluid under your vehicle, it must have entered there. IMO lang, brakes are important better to be sure.

  2. Join Date
    Oct 2002
    Posts
    267
    #12
    Quote Originally Posted by tebs
    guys, pinableed ko na on all four wheels.

    medyo ok na. yun nga lang, pagpinupump yung pedal, umiilaw yung brake indicator sa dash and may resisting force sa pedal. kumakagat naman yung brakes

    bakit umiilaw? baka kulang ang brake fluid?

    check your hydrovac,

    on engine shut off, pump your brakes several times until matigas na feel mo sa pedal. Tapos dont let go of the brake pedal and start the engine. Dapat pag andar ng engine you should feel that the pedal will travel further down for about an inch siguro. If this is the case, buo ang hydrovac mo, pag hindi bumaba yung pedal, somethings wrong with it. :D

  3. Join Date
    Mar 2003
    Posts
    149
    #13
    hmmm.....parang sa hydrovac ang problema

  4. Join Date
    Oct 2002
    Posts
    2,470
    #14
    I had a similar problem a year ago. I thought yung master lang ang problem and I replaced it with a new one. Pero the problem insisted. When I removed the hose connecting the hydrovac to the vacuum nakita ko basa, then that was the time na nalaman ko na yung brake fluid pumasok na pala sa hydrovac. Grabe nung inipon ko yung fluid na naipon sa HV umabot ng 1 liter hehehe yung HV ko kasi pwedeng buksan)Isa pa napansin ko na yung usok ko kulay puti, yun pala yung fluid pumasok na rin sa vacuum hehehe. Grabe talaga as in......

  5. Join Date
    Oct 2002
    Posts
    10,942
    #15
    jim::: Sir, may I ask ano po yung ride nyo? Pwedeng buksan ang hydrovac system nyo? :D

  6. Join Date
    Oct 2002
    Posts
    2,470
    #16
    Opo sir nabubuksan sya. Ride ko po dukhang 1977 Toyota Mini Cruiser Jeep sir pero modified na as in marami nang napalitan pati kaha minodify na kaya parang nag-ala mini Jeep Wrangler na ang dating. Yun pong HV ko Toyota AISIN. Bale yung HV may lock po sya sa gitna na steel ring. Parang clam-shell po yung HV pag tinanggal mo yung lock nabibiyak sya. Unique sir noh wala na nga akong makitang ganun sa mga auto store nagtanong ako wala raw silang ganun. Nung ipinakita ko yung HV sa kanila nagulat sila tapos binibili ba naman sa akin hehehe. If I'm not mistaken yung ganung HV ginamit sa mga unang labas ng Toyota Hi-lux. Correct ne na lang if I'm mistaken.....

  7. Join Date
    Oct 2002
    Posts
    10,942
    #17
    jim::: Wow Mini Cruiser! Yan ang type ni sir wildthing na ride, hehehe. :D Bago nga sa pandinig ko yang nabubuksang HV system, I want to see it if ever madayo ka sa Manila. Btw, where are you exactly in the Philippines?

  8. Join Date
    Oct 2002
    Posts
    2,470
    #18
    I live in Cavite pero sa Villamor Air Base, Pasay City po ako umuuwi sa ngayon. Kung gusto po ninyong makita pwede pwede ko pong i e-mail sa inyo yung pics. :P

  9. Join Date
    Oct 2002
    Posts
    10,942
    #19
    Sure! Kindly send it thru manila_tools*hotmail.com :D

    Kung pwede po kayong pumunta sa EB ng tsikot on June 21st the better! :mrgreen:

  10. Join Date
    Oct 2002
    Posts
    2,470
    #20
    cge po i'll try. pero may sched po akong akyat sa Mt. Maculot ng 21st hehehe! Thanks!

Page 2 of 3 FirstFirst 123 LastLast
brake system problem: HELP!