Results 1 to 6 of 6
-
December 13th, 2007 08:45 PM #1
is it ok to use petron rev-x all terrain, fully synthetic oil to isuzu 4ja1? it is 5-30W and friends been telling me i cant use it coz it's viscosity is too low. tama ba sila doon?
-
Tsikoteer
- Join Date
- Jan 2007
- Posts
- 409
December 13th, 2007 11:21 PM #2
-
Tsikot Member Rank 5
- Join Date
- Nov 2003
- Posts
- 3,849
December 20th, 2007 11:02 PM #3look under the hood... i think there should be a sign that says to only use a 30 wt oil on the isuzu engine.
-
December 21st, 2007 06:01 PM #4
based sa manual 15w40 ang recommended oil ng isuzu para sa ganyang engine. hindi ko lang sure kung ano magiging effect kapag below the required oil viscocity (tama po ba?) ang ginamit.
-
December 21st, 2007 06:38 PM #5
based on manual, casa's recommendation starts at sae 40 mono mineral though 15-40 multigrade is much better because of it's versatility on cold starts. IMO just stick to mineral based multigrades since 4ja-1 is not that complex than newer and modern turbo intercooler crdi's.
-
Verified Tsikot Member
- Join Date
- Sep 2007
- Posts
- 215
December 30th, 2007 06:41 PM #6usually sa mga isuzu ... 10w-30, 10w-40 and 5w-40 4ja1 ... i pressume na highlander yung car mo or crosswind .....
if your looking for motor about kaya na maganda try 76 lubricants 10w -30 niya is 170/liter ... castrol is about 270/liter magnatec .... if synthetic naman hanap mo royal purple and 76 is not a bad choice ... 5w- 40 yun pure synthetic
BANAWE AUTO SUPPLY
7120115
regy
sinabi moh! i hardly see my children now. when they were young, schedules were more predictable.
Traffic!