New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 20 of 35

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Join Date
    Dec 2007
    Posts
    40
    #1
    Learn how your car's system works....

  2. Join Date
    Jan 2006
    Posts
    1,682
    #2
    I will follow this thread. keep up the good work sir.

  3. Join Date
    Dec 2007
    Posts
    40
    #3
    Part two is now served....
    "If you want to work with something... first you must know how does it works..."

  4. Join Date
    Jan 2006
    Posts
    1,682
    #4
    Sir,
    When or where do you use Tech1? How about Tech2?

  5. Join Date
    Dec 2007
    Posts
    40
    #5
    Tech1 was the first scan tool used by GM. Then came the Tech2. These are scan tools or diagnostic tools where you can connect to your vehicle's DLC (data Link Connector) for you to connect and communicate with your vehicle's different modules, such as below:
    1. ECM - Engine Control Module
    2. TCM - Transmission Control Moule
    3. PCM - Powertrain Control Module - combination of Engine and Transmission
    4. BCM - Body Control Module
    5. EBCM - Electronic Brake control Module
    6. EBTCM - Electronic Brake And Traction Control Module
    7. SDM - Sensing and Diagnostics Modules
    and so on... as of now... average of 24 modules meron ang mga GM Vehicles..
    And of course pati na rin yung ibang mga Car Makers..
    Dahil nga, ginagawang standard na yan ng SAE..
    Different car manufacturers uses different designs of scan tool..
    Im not sure pero sa toyota yata, intelligent tester yung tawag sa scan tool nila...

  6. Join Date
    Jan 2006
    Posts
    1,682
    #6
    Mack=Vmack prolink 9000DDR
    Detroit Diesel= DDEC DDR
    Cummins=Celect plus Intelect,Insite(inquire)
    Caterpillar=ECAP

    Dont know kung napalitan na sila.

    Thank you sir.
    Post pa po ako questions of topics i dont fully understand, if its ok?
    Last edited by 4JGtootsie; December 22nd, 2007 at 08:16 PM.

  7. Join Date
    Dec 2007
    Posts
    710
    #7
    Quote Originally Posted by sonjeffrey View Post
    Tech1 was the first scan tool used by GM. Then came the Tech2. These are scan tools or diagnostic tools where you can connect to your vehicle's DLC (data Link Connector) for you to connect and communicate with your vehicle's different modules, such as below:
    1. ECM - Engine Control Module
    2. TCM - Transmission Control Moule
    3. PCM - Powertrain Control Module - combination of Engine and Transmission
    4. BCM - Body Control Module
    5. EBCM - Electronic Brake control Module
    6. EBTCM - Electronic Brake And Traction Control Module
    7. SDM - Sensing and Diagnostics Modules
    and so on... as of now... average of 24 modules meron ang mga GM Vehicles..
    And of course pati na rin yung ibang mga Car Makers..
    Dahil nga, ginagawang standard na yan ng SAE..
    Different car manufacturers uses different designs of scan tool..
    Im not sure pero sa toyota yata, intelligent tester yung tawag sa scan tool nila...
    Sir, iisa lang ang DLC para sa lahat ng mga OBD-II equipped vehicles. wether if its a American, Japanese or European car from 1997-present. also, you can use one OBD-II scanner for all vehicles, like those Snap-On MODIS, Scan Check.. etc.


    aite, peace.

  8. Join Date
    Feb 2008
    Posts
    4
    #8
    i have access to alldata and mazda tech web can help anyone.email me at onsitemotorist*yahoo.com

OBD2 (On-Board Diagnostics Generation 2)