Results 11 to 20 of 21
Threaded View
-
August 30th, 2007 09:19 PM #1
Hello everybody! New guy here and this is my first post.
I own an Isuzu Bighorn, I'm not sure about the model year but its got the skyroof and 4jg2 engine. The problem is its homongous turning radius! I sometimes have problems negotiating the U-turn slots of Q.Ave. The conversion is ok (as in all connections were checked and found to be tight).
So the question is, do you guys know anybody who could help with this? My best guess is that it has something to do with the installed steering gearbox (its a converted RHD alright). I've seen a post about the Bighorn's steering linkage and part number for the gearbox somewhere here but I can't really do something right now since I'm out of town. I wont be back in Manila till the 2nd week of September so if any of you guys could suggest something, a shop or a part that needs replacement or anything, please post them.
Another thing is the annoying brake squeal. I can hear a squeaking sound like something is dragging or scraping when driving slowly. I think it started when my uncle replaced the brakepads with aftermarket ones (forgot the brand). That was after I managed to almost warp the rotors driving down to manila from Baguio because of worn brakepads. The rotors have since been resurfaced(?). Any ideas on what's causing the brake squeal? will changing the pads help? where can I get good ones (I heared Bendix is a good brand).
I would greatly appreciate any help or suggestions.
Same design language across the range is fine Porsche, Audi, VW, Lexus and Mazda are all like...
China cars