Results 1 to 10 of 3900
Hybrid View
-
June 19th, 2005 04:22 PM #1
Originally Posted by yourman
pag led light ang gamit, maliit ang draw sa current. ang kaibahan sa regular light, ang led bright at the source pero projected light to a target mahina. para malaman ang brightness ng led look at the mcd rating (millicandela). the higher the mcd the better. 1 led bulb, lets say for the clearance light is made up of up to 9 individual leds. each led is measured in mcd. total mcd is individual mcd x number of leds. meron kasing mga bulbs na marami bulbs pero maliit ang total mcd.
if you are going to change your signal lights to led, you might need a load resistor kasi halos walang load ang led, it might signal na pundido na ang buld kahit buhay pa ang led. if you are going to change your signal lights & the cover is amber, get an amber led. if for the brake & rear lights get red kahit red na ang color ng cover. sabi mahahighlight daw yung color.
for more info click here
read the notes concerning tail/signal/brake lights. hope this helps.
pahabol: if your are adding drop-in k&n filter for 2.0 xty, part number is 33-2031-2. kung 2.5 xty ang part number ay wala.Last edited by johnnyd; June 19th, 2005 at 04:30 PM.
A 70/30 water to coolant mix may improve cooling efficiency but that's at the cost of less...
Coolant...