Results 171 to 180 of 436
-
June 26th, 2006 08:53 AM #171Originally Posted by jvandanne
The 4x4 a/t models (first gen) would go for as low as 450K if it's in not-so-good condition to a high of around 525K or so nowadays IMO.
-
Verified Tsikot Member
- Join Date
- Jan 2006
- Posts
- 113
July 5th, 2006 08:05 PM #172Originally Posted by vinj
and any idea how much it would cost just in case it needs changing?
thanks for the input
-
July 6th, 2006 01:24 AM #173Originally Posted by jvandanne
Balak ko din magpabili ng bed cover, problema ay shipping. Masyado malaki yun item.
http://cgi.ebay.com/ebaymotors/TRUXE...QQcmdZViewItem
-
Tsikot Member Rank 4
- Join Date
- Oct 2004
- Posts
- 2,315
July 6th, 2006 10:09 PM #174lemon dito ka nalang bumili sa pinas dami diyan brands na mga roller up. Pwede carryboy, pace edwards at gatorcab at iba pa. Baka mas makamura ka pa kung dito ka bibili. Yun billet grille alam ko may nagfabricate dito niyan, not sure.
-
Verified Tsikot Member
- Join Date
- Jan 2006
- Posts
- 113
July 11th, 2006 08:42 PM #175Originally Posted by jvandanne
-
August 7th, 2006 06:07 AM #176
I need to change my front brake pads, ang sabi ng Taga caltex na technician kailangan na daw e pa re-face ang rotor disc ko kasi rough na sya.. pero sabi naman sa akin ng taga nissan na casa ok pa daw un??.... Just want to make sure kasi napaka mahal ng brake pads ng frontier baka mabilis ma ubos pag di sya smooth.. mga sir ano po ba ang basis na kailangan na e pa re-face para mag smooth ulit ang rotor dics?? thanks
-
Verified Tsikot Member
- Join Date
- Jan 2006
- Posts
- 113
September 21st, 2006 10:57 AM #177
-
September 21st, 2006 11:15 AM #178
^^ You can get the shackle sa mga auto supply. 300+pesos para sa set.
-
Verified Tsikot Member
- Join Date
- Aug 2004
- Posts
- 243
-
September 21st, 2006 01:03 PM #180
the 300 peso shackles are they the generic ones with lots of holes? if yes, I strongly advise to stay away from them. They are a cheap lift alternative but they will not be in the long run. I have i think mentioned this in this thread before.
The backup charger finally arrived. Here are my findings and conclusion at the end:
My Dongfeng Nanobox - a case study of an electric...