Nissan Frontier Navara [continued]

**12vdc** · March 14th, 2015 12:19 PM

Kay 1alliance/ nissan un, 1week lang sa planta kung wala sila stock.

Hindi ko pa nakabit yung strut spacers, palagay ko kasi mag te-take off yung front kung 2inches lang yung rear.. Im learning towards ur leafpack mod, experiment mod lang din.. Or wishful thinking.. adjustsble airbag sa rear, madalas kasi kargahan yung bed ngayon ng mabigat.

**jay185** · March 14th, 2015 09:21 PM

guy sali nyo ko sa pangarap nyo pag nag dagdag kayo ng leaf.

by the way, since sobra ang bwiset ko sa incompetent na nissan north edsa since last year, hindi na ako nakabalik sa kanila para ipaayos ulet yung navara ko, kada balik ko me nasisira sila mga bwiset sila. wag na wag kayong mag papagawa ng body repair sa kanila kahet anong mangyare. incompetent yung pintor don, trabahong tamad. basta. bwiset.

anyways... isa pa is etong problema ko, nag pa 80k pms ako sa kanila last year, isa sa mga problema is squeaking break. mejo nabawasan naman yung pag squeak nya nung binalik ko pero meron pa ren. saka pansin ko since nag 80k pms din ako sakanila, humina yung break ko, parang ang dulas. parating kelangan malayo pa lang break na ako di tulad dati.

ano ba dapat kong gawin dito? too late na ba? mga bandang november yung 80k pms ko. nag 85k na ako (ako na lang tumira).

dapat bang dalin ko na to sa break shop? if yes, san meron malapit sa taguig area?

- - - - - - - - - - - - - - - - - - - - - -

guy sali nyo ko sa pangarap nyo pag nag dagdag kayo ng leaf.

by the way, since sobra ang bwiset ko sa incompetent na nissan north edsa since last year, hindi na ako nakabalik sa kanila para ipaayos ulet yung navara ko, kada balik ko me nasisira sila mga bwiset sila. wag na wag kayong mag papagawa ng body repair sa kanila kahet anong mangyare. incompetent yung pintor don, trabahong tamad. basta. bwiset.

anyways... isa pa is etong problema ko, nag pa 80k pms ako sa kanila last year, isa sa mga problema is squeaking break. mejo nabawasan naman yung pag squeak nya nung binalik ko pero meron pa ren. saka pansin ko since nag 80k pms din ako sakanila, humina yung break ko, parang ang dulas. parating kelangan malayo pa lang break na ako di tulad dati.

ano ba dapat kong gawin dito? too late na ba? mga bandang november yung 80k pms ko. nag 85k na ako (ako na lang tumira).

dapat bang dalin ko na to sa break shop? if yes, san meron malapit sa taguig area?

**Wh1stl3r** · March 15th, 2015 10:37 AM

*12vdc
Ano thickness ng spacer mo? Eto yung nakuha kong measurements from PRG. Para sa US Frontier nga lang. Should provide a rough guide anyway.

Lift Spacer thickness
1/2" 0.25"
1" 0.5"
1.3" 0.85"
1.5" 1"
2" 1.25"
2.5" 1.5"

If going with AAL sa rear better sya with longer shocks para di nagtotop out at full droop. Kung aggressive sa bumps maybe install taller bumpstops para di mag bottom out. Yung Bilstein 5125's the best for the price para sa rear, mura if sourced from 'mericuh. The AAL/Bilstein 5125 combo works. Much nicer ride quality laden or not. Di na kelangan ng airbags, pangako yan.

Yung akin standard length Bilstein HDs pero maganda na rin, IMO no need to replace with 5125s.

Yung front naman the thicker the spacer the greater the preload on the coils kaya mas matigas both compression and rebound the taller you go. Personally yung >1" spacer matigas na masyado. Pag taller than 1" spacer kelangan pa ng longer shocks and UCA bump stops.

*jay
Sorry to hear bout your experience at NE. Maybe you could try Mantrade? It's in Pasong Tamo. Baka naman cleaning lang kelangan ng brakes or palitin na yung pads?

Tapos na yung added leaves ko sa likod, I posted it some pages back. Yung front na lang ang di pa ako decided kung bababaan ko pa or stay as is. Ang goal ko naman sa lift isn't really to get higher but to improve the ride. Tingin ko a 1" lift (spacer preload/AAL) will give the perfect compromise between ride quality and handling sa corners.

**12vdc** · March 15th, 2015 02:34 PM

Originally Posted by Wh1stl3r

*12vdc
Ano thickness ng spacer mo? Eto yung nakuha kong measurements from PRG. Para sa US Frontier nga lang. Should provide a rough guide anyway.

Lift Spacer thickness
1/2" 0.25"
1" 0.5"
1.3" 0.85"
1.5" 1"
2" 1.25"
2.5" 1.5"

If going with AAL sa rear better sya with longer shocks para di nagtotop out at full droop. Kung aggressive sa bumps maybe install taller bumpstops para di mag bottom out. Yung Bilstein 5125's the best for the price para sa rear, mura if sourced from 'mericuh. The AAL/Bilstein 5125 combo works. Much nicer ride quality laden or not. Di na kelangan ng airbags, pangako yan.

Yung akin standard length Bilstein HDs pero maganda na rin, IMO no need to replace with 5125s.

Yung front naman the thicker the spacer the greater the preload on the coils kaya mas matigas both compression and rebound the taller you go. Personally yung >1" spacer matigas na masyado. Pag taller than 1" spacer kelangan pa ng longer shocks and UCA bump stops..

This is accurate. Got 1.25" spacers, lift is 2".

imageuploadedbytsikot-forums1426397639.612842.jpg

Your tips are noted bro, will get my hands on maybe next month. Medyo matagal gawin lift lalo na kung solo lang sa garahe, bka pagawa ko nalang if time permits.

**rzeraus** · March 15th, 2015 07:20 PM

anong bang recommended na shock sa harap at likod?

Bilstein 24-187152 5100 Series or Rancho RS999311 RS9000XL or ARB 60017 Old Man Emu Nitrocharger Sport Shock para sa likod? sa harap naman balak ko yong Rancho RS999787 RS9000XL Series or ARB 90003 Old Man Emu Nitrocharger Sport Strut....

hindi naka lift to, as always maraming salamat..

**jay185** · March 15th, 2015 01:46 PM

Gusto ko ren ng added leaf

magkano damage sayo?

**jay185** · March 15th, 2015 01:48 PM

Yung sa break, kakapalit lang non siguro mga 1.5 yrs ago. Saka makapal pa sya based don sa tab na visible from outside. Pag nag brebreak tuloy ako ngayon malayo pa lang kelangan tapat ka na kasi parang madulas sya. I bleed ko kaya? Anong size ng clear hose tube ba ang kelangan ko dito?

**12vdc** · March 15th, 2015 02:26 PM

^ Brake pre.. Baka masira yan kung lagi break. Hihi.. [emoji111]️

Yung clear tube na ginagmit sa aerator ng aquarium or yung sumunod dun.. Kung hindi kasya, palambutin mo sa apoy ng lighter bago ipasok sa bleeder.. Gamitan mo ng flare nut wrench para hindi masira yung head ng nut, then may katulong ka dapat sa pag bleed taga sigaw ng "bomba"... "Pirme"... Hehe.. Palagay ko yung rotor mo malalim na kelangan refacing at linisin mabuti, isama mo na yung rear drums sa inspection..

**jay185** · March 15th, 2015 07:32 PM

Originally Posted by 12vdc

^ Brake pre.. Baka masira yan kung lagi break. Hihi.. [emoji111]️

Yung clear tube na ginagmit sa aerator ng aquarium or yung sumunod dun.. Kung hindi kasya, palambutin mo sa apoy ng lighter bago ipasok sa bleeder.. Gamitan mo ng flare nut wrench para hindi masira yung head ng nut, then may katulong ka dapat sa pag bleed taga sigaw ng "bomba"... "Pirme"... Hehe.. Palagay ko yung rotor mo malalim na kelangan refacing at linisin mabuti, isama mo na yung rear drums sa inspection..

hahaha tama tama. brake :D so sa casa ko pa ren ba to ipagagawa? o kahet sa labas na? me recommended kang shop?

- - - - - - - - - - - - - - - - - - - - - -

Originally Posted by 12vdc

^ Brake pre.. Baka masira yan kung lagi break. Hihi.. [emoji111]️

Yung clear tube na ginagmit sa aerator ng aquarium or yung sumunod dun.. Kung hindi kasya, palambutin mo sa apoy ng lighter bago ipasok sa bleeder.. Gamitan mo ng flare nut wrench para hindi masira yung head ng nut, then may katulong ka dapat sa pag bleed taga sigaw ng "bomba"... "Pirme"... Hehe.. Palagay ko yung rotor mo malalim na kelangan refacing at linisin mabuti, isama mo na yung rear drums sa inspection..

hahaha tama tama. brake :D so sa casa ko pa ren ba to ipagagawa? o kahet sa labas na? me recommended kang shop?

**12vdc** · March 15th, 2015 09:00 PM

Madali lang diy yung brake cleaning, fluid renewal, bleeding, and rear drum parking cable adjustment. Yung refacing meron sa suking machine shop na may torno(lathe), pero kung sa labas mo pagagawa lahat nun brake job sa kanila mo narin pagawa. Any brake shop kaya gawin yan, sa casa per hour ang bayad kaya mahal labor. After magpalit ng new brake pads, may bedding procedure kasi para maganda kain ng friction material sa rotor, pero adviseable talaga pakinisin sa torno yung rotor bago ilapat ang new pads.

**jay185** · March 15th, 2015 09:48 PM

Copy. Anong grease ang nilalagay nyo sa Slider pin na nag hohold ng caliper

**12vdc** · March 15th, 2015 11:33 PM

Silicone grease or polybutyl grease w/c is hard to find. Never use petroleum based, lolobo yung goma ng pin hindi na papasok.

**rzeraus** · March 16th, 2015 12:50 PM

Originally Posted by 12vdc

Silicone grease or polybutyl grease w/c is hard to find. Never use petroleum based, lolobo yung goma ng pin hindi na papasok.

sir 12vdc kong wala ok lang yong silicone spray?

**12vdc** · March 16th, 2015 01:31 PM

Im not sure bro. Yang silicon spray gamit ko sa weather strips ng doors, it leaves a powdery white residue.. The grease is tacky. Try mo siguro spray sa brake fluid and see how it reacts, not good if it dissolves. The idea is to cover/insulate the rubber and sliding pin cylinder with grease para hindi kalawangin. Brake fluid being hygroscopic tendency po talaga ay to pool water on the lowest part of the brake system kaya yang cylinder valves pins ang unang inaatake ng kalawang kung hindi madalas ang brake fluid renewal..

**12vdc** · March 16th, 2015 01:52 PM

For reference po..

imageuploadedbytsikot-forums1426481393.971718.jpg

Handyman, truvalue, concorde, workstation hardware mart..

Parang pwede substitute yung electronics silicone grease that comes in small tube, same tackyness and color.. Wag yung silicone thermal compound ginagamit sa heatsink..

**rzeraus** · March 16th, 2015 02:35 PM

Originally Posted by 12vdc

For reference po..

Handyman, truvalue, concorde, workstation hardware mart..

Parang pwede substitute yung electronics silicone grease that comes in small tube, same tackyness and color.. Wag yung silicone thermal compound ginagamit sa heatsink..

got you bro, i though silicone spray will be good enough... salamat

so mga ganito Super Lube Synthetic Grease with Syncolon Multi Purpose Lubricant 3 oz: Science Lab Cleaning Supplies: Amazon.com: Automotive
Amazon.com: Silicone Grease 2.0 oz. Jar: Automotive