Results 201 to 210 of 499
-
June 17th, 2019 01:52 PM #201
Well after coating with TD, it got rained on after 14hrs.
Hopefully it has cured already. Nilalagyan naman daw nila ng Reload pag maulan para sacrificial layer.
Been a month now since, and I'm seeing less water beading already. I guess that's normal lang.
-
Verified Tsikot Member
- Join Date
- Oct 2018
- Posts
- 314
June 17th, 2019 05:12 PM #202
-
Verified Tsikot Member
- Join Date
- Jun 2019
- Posts
- 27
June 19th, 2019 03:40 PM #203is it really worth it?? damage around 18k...
Sent from my iPhone using Tapatalk
-
June 19th, 2019 05:02 PM #204
-
Verified Tsikot Member
- Join Date
- Jun 2019
- Posts
- 27
June 19th, 2019 05:03 PM #205
-
-
June 20th, 2019 01:48 AM #207
-
June 20th, 2019 03:04 AM #208
-
June 20th, 2019 03:40 AM #209
I think 2 years, then maintenance after 1 year (free).
But I'm planning to re-coat just after 1 year.
It's really hard to tell kase if meron pang coating, unlike if wax/sealant, just reapply when in doubt.
I think sulit naman yung yearly coating if 6x a week driven. Consolation lang na covered parking house/office plus pag weekend lang naarawan ng todo.
Parang na-upgrade yung yearly detaling ko to yearly coating hehe.
-
June 20th, 2019 12:38 PM #210
Depends siguro sa bagsak ng ulan or water kung mag bead or mag sheet. Pero sa akin din last step ko when washing the car is hose off lang with no pressure para mag sheet ung water pababa. Less effort in drying as compared to maraming water beads hehe
Ako ung isang SUV, hindi ko pa na-re-recoat. I think mag 2 years na this year. Alaga lang ng nung Mckee's hydro blue spray and rinse off Si02 coating. Mga once in 3 months ko ginagawa.
Madami na water spotting sa hood though (flat kasi, not angled). Planning to buy carpro essence plus, try ko kung matanggal. HeheLast edited by zechs; June 20th, 2019 at 12:41 PM.
Weld preparation is poor. The WPS should have clearly specified what's to be done. Given that...
Chery returns to PH