mits. adventure

**gambit5** · November 15th, 2002 01:54 PM

Thanks sir Miogi, got your mail.......

maganda gandang pamasko sakin ni misis to pag pumayag pa modify yung seats......

question lang uli...... anong sabi ng casa sa yo......wala bang navoid na warranty ?

**miogi** · November 15th, 2002 04:56 PM

Gambit5,

Regarding warranty, malaki ang lugi ko if ever they void it---my Adventure is under warranty for 4 years! I availed of the extended warranty given by Diamond motors, I paid an extra 25k and at that time I thought it was peace of mind. But the guys sa casa were too mesmerized to even tell me I made a mistake--as long as it does not cause any problems with the ride(in general)no problem---I hope!

**mbt** · November 15th, 2002 05:07 PM

merong '98 yata na adventure yung pinsan ko... natagtagan ako sa rear seats. pero as they said, naayos na nga yata yan.

UUUUY!!! pwedeng pwede yung front seats na ganyan sa 2k2 CR-V!!! :D converted din yung minivan namin to a 2+2+3 configuration... ANG LUWAAAG! totally changes the feel of the interior

kaso, tanong lang... paano yung access sa third row ng adventure na yan?

**miogi** · November 15th, 2002 06:24 PM

mbt,

the aisle the conversion has created allows people to walk thru from the first to the third row, or from the 2nd row to the third row. the adventure is not a minivan, so don't expect an easy chevy venture/kia sedona like ingress/egress. pinoys like you and me will find it cumbersome but hey nobody is complaining as far as my family is concerned. another thing, I think its neat that I finally got to use the center console box(matic tranny)the (former)bench seat inadvertently covered.

seat mate converts 2k2 crv front seats too for 8,500 yata plus the console for 7,500.

**mbt** · November 15th, 2002 06:29 PM

hmm yeah, medyo masikip nga siguro yung pass-through between the 2nd row seats... but ok na ok pa rin!

that's one unique adventure...

hehe para sa akin ok na ok yung space between the seats to put umbrellas in... really handy when it's raining...

**Dianne** · November 17th, 2002 07:57 AM

Miogi,

Hi... long time no hear...

super ganda naman ng seats conversion mo...

paki email naman ng details and the whereabouts of the shop incl contact person or owner... post ka ulit sa MAC... di mo na kami pinapasyalan :|

dianness2002*yahoo.com

paging Doc Diesel... help naman sa pedal spring conversions mo. Tigas talaga eh... pati clutch sobra... grabe... :x

**miogi** · November 17th, 2002 08:40 AM

dianne,

sorry for not posting sa MAC, but i get to read the posts though.

you can ask the details from the owner mr. rommel san pedro at 531-1299 or 532-2104. seat mate is near the Mandaluyong circle on the BGY additional hills side going to shaw blvd.

**chieffy** · November 17th, 2002 01:47 PM

Originally Posted by gambit5

Boss Chieffy, pa send naman sakin ng full pix nyan for reference, email me at jepoy7772000*yahoo.com

bigyan na lang kita copy ng files pagpunta mo rito for undercoat retouch and free underwash...you can also click yung link ko sa pbase...doon lahat pics pati sa undercoat :wink:

**CognacRed** · November 17th, 2002 06:09 PM

Hi fellow MAC's, musta na kayo ...

Ah haah!!!!!! Kaya pala nawawala ang ibanng member nandito pala kayo ...

Huwag lang kalilimutan ang MAC, ha?

See you .....

**Doc Diesel** · November 18th, 2002 09:34 AM

gambit5,
What I did with my spring was to take it out from the pedal and brought it to my suking spring manufacturer.

They measured it and advised me of the change in diameter size of the wire like metal that was used. From to 2.5mm to 2.0mm and an option to have it down to 1.5mm pa pero sobra na daw nipis and accelerator spring might not have the pull power.

Doc Diesel

**gambit5** · November 18th, 2002 02:41 PM

[/quote]
bigyan na lang kita copy ng files pagpunta mo rito for undercoat retouch and free underwash...you can also click yung link ko sa pbase...doon lahat pics pati sa undercoat :wink:[/quote]

Sori Bossing, di na naman ako nakapunta....lintek kc ulan na yan...papunta na ako bandang 11 AM ng umulan ng pagkalakas lakas so tinamad na naman ako.....

**gambit5** · November 18th, 2002 02:42 PM

Sir Doc Diesel,

saan po ba malapit yung suking spring manufacturer nyu? baka pwede ko na pong pasyalan kc at least alam na nila yung specs nung spring pedal ......

cj · November 19th, 2002 10:46 AM

boss chieffy,

tanong lang po:

1. magkano yung pa undercoat (crosswind)?
2. gaano po katagal?
3. saan po yung shop nyo?

salamat po

**chieffy** · November 19th, 2002 12:51 PM

sorry po OT...

Originally Posted by gambit5

Sori Bossing, di na naman ako nakapunta....lintek kc ulan na yan...papunta na ako bandang 11 AM ng umulan ng pagkalakas lakas so tinamad na naman ako.....

okay lang pare ko...may nakahanda na nga akong 3M Undercoating aerosol spray para sa retouch...kung may matira ibibigay ko na lang sa iyo...sched na lang ulit natin sa Sunday... :wink:

Originally Posted by cj

boss chieffy,

tanong lang po:

1. magkano yung pa undercoat (crosswind)?
2. gaano po katagal?
3. saan po yung shop nyo?

salamat po

1. around Php 1900
2. underwash 1-2 hours depende sa dumi (sinasabon pa kasi)
drying process 30 mins to 1 hours (depende sa weather)
spraying process 45 mins to 1 hour
finishing touches 30 mins
curing at least 12 hours
3. ADR Caltex Service Station #12 P. Sanchez St., Sta. Mesa, Manila (malapit sa intersection ng Shaw at Kalentong) tel # (02)7158698
MARC Caltex Service Station #1679 P. Gil St., Paco, Manila tel # (02)5645650

text mo muna ako para mai-sched natin ride mo 09189254065 Ronald (may freebies nga rin pala pag nandun ako :wink: )

**mackieboy** · November 20th, 2002 08:32 AM

nandito na pala kayo...:D

gandah nong seats noh!?

adventure ko wala parin progress, hindi parin madala sa ziebart..
gusto ko rin undercoat at paint protection pero wala parin time..

btw, saan kayo nagpapa-vulcanize? yung hindi masira rim/mags.. pag sa kanto-kanto kasi malamang na magasgas/sira yung rim/mags

dito lang ako.. pabasa-basa..

**Dianne** · November 21st, 2002 01:20 PM

mackieboy,

sa mga big gasoline stations, okay na... basta may machine..

In some stations, they use yung parang rubberized putting na tinutusok
lang... di na tinatanggal gulong... one time, ganun ginawa sa lancer namin,
so far okay pa more than a year na... mga P 100 lang ata isa... kasama na labor

**Doc Diesel** · November 22nd, 2002 10:06 AM

Originally Posted by gambit5

Sir Doc Diesel,

saan po ba malapit yung suking spring manufacturer nyu? baka pwede ko na pong pasyalan kc at least alam na nila yung specs nung spring pedal ......

Gambit5,
I presumed that you saw my location below my name....

anyway, I had it made in Beta Spring, a known spring manufacturer here in Davao. Just look into the yellow pages and look for any spring manufacturer or if you want, I can have one made specially for you. Email me in private if you are interested.

Doc Diesel

**gambit5** · November 27th, 2002 04:08 PM

oppsss.....me dokling.....di ko napansin na taga Davao ka....one time kc I read na nakasama ka sa EB d2 kaya I was assuming na nasa Maynila ka.....

I'll think about it kung economical yun manggaling pa sa davao ( thru courier ) yung spring assembly.....

maghahanap na lang ako sa yellow pages..... anyway thanks Man for the suggestion....

**CognacRed** · December 1st, 2002 04:18 PM

Mackieboy

nandito na pala kayo...

Fisrt posts mo pa lang ito Mackie ?? Huli ka sa balita, I posted about Tsikot sa MAC siguro mga September pa ..

Gambit5
oppsss.....me dokling.....di ko napansin na taga Davao ka....one time kc I read na nakasama ka sa EB d2 kaya I was assuming na nasa Maynila ka.....

I'll think about it kung economical yun manggaling pa sa davao ( thru courier ) yung spring assembly.....
[/quote]

Kasama rin natin sa MAC yan di ba?

**chuaed** · July 19th, 2007 11:13 PM

sir miogi,

inquire lang, kamusta na iyun seats mo sa adventure?

may 5 yrs na... okay pa kaya?

The Largest Car Forum in the Philippines

mits. adventure

Thread Tools

Search Thread

Display

Hybrid View