LANCER Itlog (93-96) Owners - Please Post Here!

[KaYLakS]

hehe...tnx mga master...ok na pina wheel alignment ko na ln din pra sure...taz pina reinsert ng manibela...

kaso ngaun naman ung bintana naman problema...ung isa kasi stuck up na...tas ung isa napwersa ata ng anak q...ayaw n din maitaas at maibaba...pareho sa likod na pinto...magkano kaya pgawa nun...ok ln po ba sa evangelista?...taga paranaque ln kasi ako...manual ln po ung window...idea nman po para mabudgetan ko sya...tnx

5Hphp/window ang banat nila dito sa Ilocos per windoww.. cable change w/lubrication. 2k naman kung buong assembly.

[KaYLakS]

Hi mga ka eggie newbie lang ako d2 may itlog rin ako gli 94 model ask ko lang saan kaya maka2bili ng scuff plate natanggal kasi ung sa akin hindi ko alam kung saan nalaglag siguro ung pagbu2kas ng pinto ng anak ko..

LoL.. Di ka nag-iisa... Pero kung gusto mo, search ka ng mga "PART OUT SALE" ng itlog.

[kurtjulian]

ok na po sir kaylaks...had it replaced sa evangelista kanina...
400 per window charge...natawaran pa ng 350...total 700 pra sa 2 bintana...

[Hybrider]

I'm not sure it this is the right thread, but anyway, may i ask if 15" rim is recommended for our itlog, and if it is, any adjustments for the spring, shock, or under-chassis modification for it not to lodge to the body? thanks.

[JohnM]

15" kayang-kaya. Some itlogs ride on 17s. Just get rims with the correct offset. Not sure kung anong max tire width ang pwede.

[Hybrider]

Sir regarding the offset what does it mean?

[JohnM]

Offset


IIRC +35 ang Itlog CMIIW.

[Hybrider]

Thank you sir for the response.
Anyway sir my problem actually is the back wheel lodges to the body with the stock rim and tire. What I want to do is to change it to a 15" rim and applicable tire size, my concerns are the shock, spring or other things needed a newer one's as well? for it not to lodge to the body?
Or from the original setting, what are problem of lodging the back wheel unto the body?

[JohnM]

Which part of the body does it hit? I was using 14" 195mm wide tires (my friend was using 15" 205mm with 1" lowering spring) and never hit any part of the body. Bump stop lang when overloaded.

[Hybrider]

Actually if I'm riding with 2 adults at the back, the back portion of the car is too low, and the tendency while moving, sometimes the wheel hits the upper part of the body I think. Is there any problem with my shock or spring, etc...? or any solution to lifted the back portion of the car? thanks...