To solve the hyperflash issue of the LED turn signal lights, I had installed these 6ohm, 50W resistors. Just tap one piece each to the turn signal wires. I used 3M molding tape to fix them unto the metal frame.
Sent from my D5833 using Tapatalk
To solve the hyperflash issue of the LED turn signal lights, I had installed these 6ohm, 50W resistors. Just tap one piece each to the turn signal wires. I used 3M molding tape to fix them unto the metal frame.
Sent from my D5833 using Tapatalk
ASX Rear Fog Lamp Connection Diagram
I found the diagram from Google Images. This is how I interpret the diagram. Please correct me if I am wrong.
Connector G-17 (13-pins) may or may not be present in your ASX. This connects to the reversing sensors and rear fog lamp (?).
Connector G-20 (18-pins) is present in all ASX. This connects to floor wiring harness and rear end wiring harness combination.
Connector G-14 (2-pins) may or may not be present in your ASX. It connects to the rear fog lamp.
If G-14 is present, simply plug the rear fog lamp and you're done.
If G-14 is missing, connect the rear fog lamp directly to G-17 or to G-20, whichever is available.
Fog lamp Pin 1: connect to Pin 8 of G-17, or to Pin 9 of G-20.
Fog lamp Pin 2: connect to Pin 7 of G-17, or to Pin 18 of G-20.
After this, you can enable the Rear Fog Lamp column switch using ETACS Decoder if you have not already done so.
Sent from my ASUS_Z010D using Tapatalk
hello mga sir. i looked for used asx 2010 and up models in carmudi and found some ranging from 450K to 600k. is it worth it?
Hello ASX owners. Hingi lang sana opinions niyo.
A relative is offering her 2011 ASX M/T for 350k. I think it's a great price considering that the lowest I've seen from the same year model is 420k. And I know she maintains the car well.
I currently have a 1st gen vios. No problem with the car at all, but I still want to upgrade. Lalo na't gusto ko talaga ang Lancer EX noon pa. I don't know much about the ASX though dahil hindi ko masyado tinitignan ang mga crossovers. Now that an opportunity has presented itself, can help you me decide whether to buy it or not?
I'm prepared for the higher fuel consumption and maybe higher maintenance costs. My main concern is kung may mga major problems ba with this car. I've already the joined the FB group and from what I've read so far, karamihan ng mga nagkakaproblema is yung A/T, mostly may vibration daw.
Mukhang di na active tong thread na to but I hope someone can help me. Thanks!
Check the car to know which part needs attention. I have the 2017 model and from my observation, the suspension is on the soft side.
Sent from my iPhone using Tapatalk
Add to it since this is a m/t.
Check if clutch is worn/slipping.
Goodluck
Sent from my BLL-L22 using Tapatalk
Earlier this year, pinaayos niya yung suspension. Sa Cruven pinagawa so I'm assuming lower quality yung parts na ginamit? Nawala yung kalampag but the problem is, nagkaproblema naman yung transmission support daw. Nagba-vibrate pag malamig pa makina, pero nawawala pag mainit na. Will have this checked. Sirain ba talaga suspension ng ASX?
Pardon my being a newbie but does soft suspension mean more chances of breaking down?
Di ko pa natest drive yung sasakyan but I'll take note to check for slipping transmission.
Onti onti ba nauubos ang brake fluid?
Sent from my BLL-L22 using Tapatalk