Results 11 to 20 of 26
-
January 25th, 2007 11:46 AM #11
Pre use a drill bit with a smaller diameter then use the reverse rotation, pag hindi pa sumama gamitan mo ng screw extractor, may nabibili sa mga Ace hardawre na mura lang, since plastic lang naman yung base kaya na yan, pag steel ang application nilalagyan ko muna ng penetrating oil ( wd-40 )
hope this help
-
January 25th, 2007 11:52 AM #12
other than soldering...i-mighty bond mo kaya yong screw driver sa screw. tapos pag natanggal na, bagong thread na lang kung paano tanggalin yong screw sa screwdriver :D
-
Verified Tsikot Member
- Join Date
- Oct 2006
- Posts
- 114
January 25th, 2007 11:57 AM #13in case lang di mo pa natanggal screw... kung may hand drill o barena ka, tirahin mo ng mas maliit na drill bit ung screw, this way madudurog na ang screw -- bingo! tanggal si screw! SCREWED?!
-
January 25th, 2007 12:07 PM #14
ano ba yong dub city toy? kasinglaki ba yan ng matchbox? hirap drill yon..
-
January 25th, 2007 12:43 PM #15
mga sir, salamat po sa reply.. hindi kaya ng vice grip, wala nman kaming pang soldering eh.. hehehe..
update ko lang po, natanggal ko na yung screw.. pero i have to sacrifice yung ilalim ng platform ng car.. (by the way, 1:24 hommie rollerz yung dub city toy ko na may kasamang plastic platform) talagang sira na yung screw, ang ginawa ko nalang is to heat the blade of a cutter then parang ini-slice ko yung side ng screw (makapal na plastic yun) then nung medyo pwede na gamitan ng long nose pliers, pinihit ko na..
buti na lang at walang damage sa car, ilalim lang nman ng platform ang natunaw.. salamat sa replies..
-
January 25th, 2007 01:08 PM #16
-
January 25th, 2007 01:19 PM #17
Liquid wrench let it soak for a while then use vice grip. If not, drilling it out is the way to go.
-
January 25th, 2007 01:24 PM #18
kung delicate yung material at mahirap i tanggalin, ok yun idea na drill a hoe in the center of the screw, do it meticuluosly nga lang maingat dapat me special drill for that if maliit lng yung screw,then with the size of the drill,get a rod or a used drill bit bond it inside the screw and unscrew it.
yung idea to reverse the drill might not be effective ang magyayari lang is you uncover the drill bit itself but you wont retrieve the screw.
idea lang=)
-
January 25th, 2007 09:21 PM #19
sir Boybi check nyo po ang link para may guide kayo kung ano ang tamang size na gagamitin drill bit at extractor na depende din kung ano size ng na stuck na screws or bolts
http://www.chain-auto-tools.com/pict...nstruction.jpg
-
January 25th, 2007 09:26 PM #20
Bihira pang magbigay ng discount. So most likely 200k price difference ng monty vs fort.
4th Gen Montero Sport (2023)