Generator sets

[dr. d]

if you don't mind the aesthetics.
put old tires against all sides. then get another tire, put it on the ground, then get some wood with dimensions big enough such that it will fit in between all those side tires and not slosh around. then clamp the generator on that wood.

[StockEngine]

if you don't mind the aesthetics.
put old tires against all sides. then get another tire, put it on the ground, then get some wood with dimensions big enough such that it will fit in between all those side tires and not slosh around. then clamp the generator on that wood.

during my acoustics class.. we ventured into egg trays/cartons... but i wasnt interested...i was more into robotics then 😁 before drone era was good but now im not as savvy..

Sent from my SM-G935F using Tsikot Forums mobile app

[badkuk]

^ i was thinking more along the lines of acoustic, non-flammable foam sir, pero solve ko muna yung vibration.

Hindi naman po namin isasara yung doors while the genset is on for better ventilation

[Walter]

Paps... poor ang ventilation? ... mag overheat yan... yung exhuast pipe lagyan mo ng extension palabas... dapat maganda ventilation...

Noticed this also ... poor ventilation ... and the exhaust pipe has to be larger ...

[badkuk]

Would putting an industrial fan inside help? Yung exhaust pipe extended naman palabas, and hindi nakafix sa genset, tinutok lang dun yung tambutso.

[Gumusut_Amige]

mga sirs patanong naman. i'm planning to add some wood planks on the base of the genset house para mabawasan yung vibration. Plano ko is just enough wood so that the base rests on the wood, and nakaangat yung mga gulong.


OK na kaya coco lumber or scrap plywood?

mas maganda sana yung naka anchor bolt ang gen-set mo without the wheels on a solid flat floor (must be same level on all 4-corners).
to lessen the vibration meron din nabibiling hard rubber para ilagay on top of the solid flat floor bago higpitan ang anchor bolt.

agree din ako sa extension ng exhaust pipe para iwas overheating... ideal kung meron insulation material na pwedeng ibalot sa exhaust piping/muffler (ewan ko lang kung meron kay bro gm ito).

[Lew_Alcindor]

Would putting an industrial fan inside help? Yung exhaust pipe extended naman palabas, and hindi nakafix sa genset, tinutok lang dun yung tambutso.

Industrial fan would be an overkill. Just Put an exhaust fan to draw how air out.

[badkuk]

Thanks for the comments sirs, i'll see if i can get something done over the weekend

[narmenia]

Meron bang nabibiling less than 10KVA na GENSET na:
- diesel
- 1800 rpm
- liquid cooled
- brushless alternator
- OK lang kahit CHINA engine (or clone)

TIA

[glenn manikis]

Meron bang nabibiling less than 10KVA na GENSET na:
- diesel
- 1800 rpm
- liquid cooled
- brushless alternator
- OK lang kahit CHINA engine (or clone)

TIA

Meron din...

Pero better get nalang 15kva kunti nalang difference kasi sa 10kva....

Bnew 250k Good for standby Use

Genset use for Contineous 24/7 Operation
Bnew 350k

[narmenia]

Meron din...

Pero better get nalang 15kva kunti nalang difference kasi sa 10kva....

Bnew 250k Good for standby Use

Genset use for Contineous 24/7 Operation
Bnew 350k

Pano mo malalaman if Standby use lang?
And if contineous?

Nasa brand ba? Engine?

[leinahtan]

time for genset function test again. dry run monthly

Sent from my SM-C900F using Tapatalk

[JMS12]

time for genset function test again. dry run monthly

Sent from my SM-C900F using Tapatalk

good better ready than sorry [emoji30]

Sent from my SM-G955F using Tsikot Forums mobile app

[Wh1stl3r]

Have to send a genset or two to our offices in Bicol. Can anyone recommend a seller and models? Will probably need 3.6KVA to 5KVA.

[shadow]

Have to send a genset or two to our offices in Bicol. Can anyone recommend a seller and models? Will probably need 3.6KVA to 5KVA.

Mga generic China lang pwede na. Wala naman special sa generator eh. Parehas lang lahat yan. Dami sa Quiapo.


Sent from my iPhone using Tapatalk

[Lew_Alcindor]

Have to send a genset or two to our offices in Bicol. Can anyone recommend a seller and models? Will probably need 3.6KVA to 5KVA.

Wala ako kilalang seller pero madami nga sa Quiapo (Evangelista St.) Doon ko binibili mga power tools ko at welding machine.

I also have a small genset (1000watts) pero sa Laguna ko na binili para malapit sa amin. Toyohoma ata yung tatak.
Most probabaly Made in China pero at least well-written yung manual in English.

Kung kukuha ka ng genset at puro China-made naman ang option, choose the one with copper windings (instead of aluminum). Mas matagal masira.

Diesel genset is also a good option although mas mahal for same capacity as gasoline genset.
Diesel gensets tend to be more quiet (lower operating RPM) at syempre mas mura ang diesel.

Yung gas genset needs proper maintenance lalo na carburetor. Pag natengga ng matagal at nabarahan ng kaunti ang jets ng carb, palyado na agad takbo.
Kaya ako lagi nag lilinis ng carb.

[StockEngine]

Have to send a genset or two to our offices in Bicol. Can anyone recommend a seller and models? Will probably need 3.6KVA to 5KVA.

message mo si gm bro

Glenn Manikis | Facebook

[shadow]

Si *uls din yata nagbebenta


Sent from my iPhone using Tapatalk

[Wh1stl3r]

Thanks for the info guys. Ipon lang muna ako ng quotes.

[shadow]

Thanks for the info guys. Ipon lang muna ako ng quotes.

Pa quote ka kay uls.


Sent from my iPhone using Tapatalk