Banawe Overpricing Stores

[baludoy]

Mahirap talaga makipagsapalaran sa banawe kung Wala Kang alam sa sasakyan. Sana nag tanong-tanong muna iyong senior citizen couple or nagpasama sa may experience sa mga auto.

https://twitter.com/TVPatrol/status/...qlAgNmWlA&s=19

Oil for Change oil Lang daw Ang pinunta sa banawe. Na sales talk Ng kung anu-ano na.

it's a dog eat dog world out there in banawe. Ika nga ni p. t. barnum, "A sucker is born every minute".

Sent from my RMX3690 using Tsikot Forums mobile app

[uls]

ganyan talaga style

you go there for one thing they're gonna point out other things that need to be replaced

pag wala ka alam sa kotse at sabihan ka ng "delikado yan pag di palitan" mapapagastos ka talaga

ganyan din naman ang casa mas subtle lang

the car repair trade exploits the knowledge gap between mechanics and car owners

it's your responsibility as car owner to close the gap

[Devastator]

Mahirap talaga makipagsapalaran sa banawe kung Wala Kang alam sa sasakyan. Sana nag tanong-tanong muna iyong senior citizen couple or nagpasama sa may experience sa mga auto.

https://twitter.com/TVPatrol/status/...qlAgNmWlA&s=19

Oil for Change oil Lang daw Ang pinunta sa banawe. Na sales talk Ng kung anu-ano na.

it's a dog eat dog world out there in banawe. Ika nga ni p. t. barnum, "A sucker is born every minute".

Sent from my RMX3690 using Tsikot Forums mobile app

Mga ganyan will do anything para lang kumita pa, Kung oil change lang din lang eh sa gas station pwede naman ipagawa.

[falken]

Mahirap talaga makipagsapalaran sa banawe kung Wala Kang alam sa sasakyan. Sana nag tanong-tanong muna iyong senior citizen couple or nagpasama sa may experience sa mga auto.

https://twitter.com/TVPatrol/status/...qlAgNmWlA&s=19

Oil for Change oil Lang daw Ang pinunta sa banawe. Na sales talk Ng kung anu-ano na.

it's a dog eat dog world out there in banawe. Ika nga ni p. t. barnum, "A sucker is born every minute".

Sent from my RMX3690 using Tsikot Forums mobile app

Ang bait naman nila. Free labor pa.

Sent from my SM-T970 using Tsikot Forums mobile app

[dr. d]

when going to banawe to have something fixed, i stick to my purpose.
pag may inalok, either i say no thanks, or "nick's time na lang po. wala sa budget, eh."

one time, however,
the guy was carrying his wares on a display plywood over his back.
knives.
he was showing me a nice-looking itak.
"meron ka bang mas maliit?"
he showed me a 7 inch kitchen knife.
nice! stinless na,
made USA pa,
and by Golden Dragon no less (bruce lee!).
"gawa sa bolitas? bat hindi rilis ng tren?"
"hinuhuli na raw, eh."
heh heh.

after over 2 decades,
that knife is still with us, doing good service.
hey! it holds its edge pretty well!
mabuhay ang bolitas knives!

[shadow]

Marami pa pala naloloko diyan. Never kasi makipagusap sa mga amuyong


Sent from my iPhone using Tapatalk

[BratPAQ]

Anyone with better eye sight than mine? Ano itong nga charges? 13k for what? Nagkasundo daw Around 70k+ binalik pero 100k+ bill ,I bet pag tiningnan mo yang mga naka itemised na yan eh hindi lahat yan ginawa.

[_Cathy_]

Anyone with better eye sight than mine? Ano itong nga charges? 13k for what? Nagkasundo daw Around 70k+,I bet pag tiningnan mo yang mga naka itemised na yan eh hindi lahat yan ginawa.

Rack End ang basa ko sa 13000, Upper Control Arm sa 45000

Sent from my SM-N960F using Tapatalk

[Dr.Kamiya]

I think it says "rack end"

I wonder what car that is. Mas mahal pa sa CASA lol

[dr. d]

Anyone with better eye sight than mine? Ano itong nga charges? 13k for what? Nagkasundo daw Around 70k+ binalik pero 100k+ bill ,I bet pag tiningnan mo yang mga naka itemised na yan eh hindi lahat yan ginawa.

errr,
what's a balancer?
by the listing, it seems rim and tyre lang ang hindi pinalitan...

i do not know chevy prices,
but don't these prices here seem inflated, by banawe standards....?

[dr. d]

the last time i had a front bearing in my 'nova replaced there,
they suggested i have my front suspension aligned.
obvious naman na hindi na pantay ang kain sa tyres,
but... kinuripot ako!
"next time na lang."
highs.

it's my very spare car, kasi.
i drive it only when the coding car ain't easily available.

[baludoy]

I think it says "rack end"

I wonder what car that is. Mas mahal pa sa CASA lol

i think it's a chevrolet trailblazer.

[carxynogen]

Anyone with better eye sight than mine? Ano itong nga charges? 13k for what? Nagkasundo daw Around 70k+ binalik pero 100k+ bill ,I bet pag tiningnan mo yang mga naka itemised na yan eh hindi lahat yan ginawa.

Grabe, super overprice yung tie-rod.
Yung tie-rod na nabili ko sa rear wheel, 400 lang for 1 pc.
Pinalitan ko nalang rin yung isa sa kabila, plus labor of 200 sa gumawa.
1k lang nagastos ko, pero sa pricing dito, tig 5k yung isa.

Yung Lower balljoint yang 13,600.
At isa pa, yung Upper Control Arm yung nagpamahal dito at 45,000.
If ininstall eto ng shop, dapat branded yung ininstall.
Since nag agree na isauli 70k, then I am suspecting they didn't install this part sa car.

[BratPAQ]

Grabe, super overprice yung tie-rod.
Yung tie-rod na nabili ko sa rear wheel, 400 lang for 1 pc.
Pinalitan ko nalang rin yung isa sa kabila, plus labor of 200 sa gumawa.
1k lang nagastos ko, pero sa pricing dito, tig 5k yung isa.

Yung Lower balljoint yang 13,600.
At isa pa, yung Upper Control Arm yung nagpamahal dito at 45,000.
If ininstall eto ng shop, dapat branded yung ininstall.
Since nag agree na isauli 70k, then I am suspecting they didn't install this part sa car.

Ang dami nyan at na install nila yan ng hindi aware sa specifics ang customer eh obvious na nang scam sila.

I doubt lahat yan pinalitan/ginawa nila.

[dr. d]

Ang dami nyan at na install nila yan ng hindi aware sa specifics ang customer eh obvious na nang scam sila.

I doubt lahat yan pinalitan/ginawa nila.

"where are the parts that you replaced from my car?"
"hito po."
"...aba! hindi pang-chevy ang mga ito! eh, mga sardinas ito, ah! (555) ."
heh heh.

[H1Tman]

Grabe, super overprice yung tie-rod.
Yung tie-rod na nabili ko sa rear wheel, 400 lang for 1 pc.
Pinalitan ko nalang rin yung isa sa kabila, plus labor of 200 sa gumawa.
1k lang nagastos ko, pero sa pricing dito, tig 5k yung isa.

Yung Lower balljoint yang 13,600.
At isa pa, yung Upper Control Arm yung nagpamahal dito at 45,000.
If ininstall eto ng shop, dapat branded yung ininstall.
Since nag agree na isauli 70k, then I am suspecting they didn't install this part sa car.

Can you recommend your suki shop in Banawe?