Mali yung items na dineliver ng hardware. Need to wait for another 2 days para mapalitan. No choice sila lang bukas [emoji16]
Mali yung items na dineliver ng hardware. Need to wait for another 2 days para mapalitan. No choice sila lang bukas [emoji16]
The ASX had a broken tire valve while both the FXT and Civic had tore punctures. Buti na lang mayrun open na vulcanizing shop.
Sent from my iPhone using Tapatalk
Sobrang init ang bilis maka ubos ng energy.
Sent from my SM-G965U using Tapatalk
Timing naman bakit ngayon pa nasira electric fan koSiguro na overwork because it was on the whole day yesterday but I turned it off at night. Weird that it works at number 3 but not 1 and 2. I only like the 1 setting (no matter how hot it is) I don't wanna use it anymore, baka sumabog pa. Sulit na rin as this is more than 10 yrs old :P
How am I supposed to replace it now?!?!I hate using the A/C esp now with the virus
start it up at 3.
when it gets up to speed, press 1 or 2 and see if it keeps going.
if it does, then you can still use that fan at 1 or 2. if not, you can still use it, at 3.
that is what i've been doing to my fan for the past 2 months.
don't worry. it won't catch fire or explode.
you can have the bushings replaced, when the lock-up is lifted. for some models, the entire rotor (yung umi-ikot sa loob) is replaced. many shops do that. the repair lasts long.
or you can buy a brand new fan.
use that aircon! that's what it's for.
if you do not have the virus in your airconed room,
using that aircon will help prevent virus on the outside, from entering.
Last edited by dr. d; May 5th, 2020 at 11:53 AM.
Yung mga ganyan namin na fan na tinatapon eh kinukuha ng bayaw ko. Then I will later see ginagamit na nila. Pina rewind yata tawag dun. Nasa 200 lang yata pagawa.
You can also try lazada and shopee. Although you need to be patient, yung iba mabilis delivery yung iba na ca-cancel lalo na pag mahaharang sa checkpoint.
Sent from my Mi 9T Pro using Tapatalk
if the front blade housing is removed and the blade rotated by hand, it will be found that the blade rotates with considerable resistance.
bushing (bearing) problem yan.
i have tried to remedy the problem by squirting lubricant into the bushings. ok at first, but the problem returns after a few days.
that is why, the blade rotates at high setting (3) and not at low setting (1 or 2).
Last edited by dr. d; May 5th, 2020 at 12:14 PM.