Grabe na yung sahig ng garahe ng mga truck namin, parang putik ng langis and malagkit na maglakad dun.
Ano ba magandang paraan para malinis yun?
Grabe na yung sahig ng garahe ng mga truck namin, parang putik ng langis and malagkit na maglakad dun.
Ano ba magandang paraan para malinis yun?
tambakan muna ng lupa ng ilang araw tsaka palahin tapos sabunin na at skoba-hin. papa-pinturahan pa ba boss na parang pit garage? hehe
pag di nakaya nito boss after ma-absorbed ng lupa.
exercise na lang ng pahinantes mag walis tingting para luminis lang![]()
Hindi kinaya nyang brush na yan. Di rin kaya ng walis tingting. Tingin ko kelangan ng chemical para matanggal yung langis. Ano kaya pwede ipanglinis?
got the same problem here... I got an oil stain in my garage, after the mechanic fixed my busted car....
I think what can help may be a hot water with soap on it then scrub it, as this is what am gonna be doin tomorow....
sa planta namin (food mfg kami).. may nag test sa amin.. hot water spray gun .. imagine parang pang car wash but yung tubig na lumalabas ay mga 90 degrees Celsius... then konting sabon.. kitang kita ang difference between normal scurbbing with water and soap, vs dun sa area na ginamitan ng hot water spray...
as of now nag ca canvass pa kami ng ibang alternative suppliers... but that seems to be the solution...
i would think oil / grime is almost the same as sa amin (we are heavy user of cooking oil so yung dulas sa sahig is mostly because of cooking oil)..
Pwede kaya Muriatic Acid?
Tapos scrap-off the rest then use detergent to finalize.
Gasolina or Kerosene first, Scrub, then Detergent and then scrubbing agen.
ah oo, effective talaga pag high temp plus high pressure pa. heat will easily loosen mga tulog na oil same as kerosene and gasoline the better kaya lang medyo magastos.
muriatic acid, pwede siguro pero delikado. pati gamit na gagamitin mo baka matunaw.
yung quote sa amin was yung KAESSER brand (gumagawa din ng air compressors).. banggit ng kuya ko nasa 1xx,xxx.xx something presyo...
nag inquire din sya sa clean city (dealer ng mga janitorial supplies and equipment like floor polishers, etc.. ).. di ko maalala price na banggit nya.. but much cheaper.. although specs ata magkaiba...
naghahanap pa kami ng alternative supplier kaya wala pa...
hmmm can this also be applied sa car wash? something like hot shower for the car? hehe..
Same principle sa car under wash using steam.
Meron dati sa Total North Fairview, car under was using KAESSER, ngayon wala na at gamit nila ngayon eh foam wash na lang![]()
first, mechanical cleaning by scraping the dirt and grime off the floor and discarding it. second, chemical cleaning by some biodegradeable degreaser such as kleenol or simple green. but in the philippines, axion dishwashing cream or liquid followed by a rinse of hot water. flushing biodegradeable detergent to the storm drains or to the ground is acceptable if done sparingly. using gasoline, kerosene or other petroleum products is not only costly but is very dangerous. if somebody smokes around the area then the whole place would ble cleaned to ashes. if you use muriatic (hydrochloric) acid washes or etches the concrete if it was new in preparation for priming and/or painting but not degreasing. acid is very dangerous, corrosive, toxic and may damage the concrete and the reinforcing bars embedded in the concrete. use green way of cleaning that does not have a big impact on the environment