Mazda B-Series (B2200/B2500)

[azzkkr2600]

to azzkkr, no idea kung san makakabili ng salamin e, pero nga sana magkaroon ng fun run, para masaya hehehe

post your suggestions for the Fun Run or the next EB here. merong hindi mkakapunta ng saturday. pwede nmang saturday and the next day din para kumpleto diba?

[azzkkr2600]

San po banda sa banawe yung Mazford? May mga window mechanisms kaya dun? D na gumagalaw yung mechanisms nung b2200 ng kuya ko...kailangan nang palitan. And lahat nung rubber na nasa pinto at bintana wala na rin. Almost two years kasi syang d napaandar pero inaayos na ngayon. At saka kung bibili dun, meron din kayang magkakabit dun? Salamat po ng marami.

can you post some pictures of your brother's b-series truck? it's easier kung may litrato. pero for sure mura lang yan. dami na ngayong replacement parts for our mazda trucks.

[chinesecarebear]

* muneng

yun mazford madaling matunton kung galing ka sa e.rodriguez, kung lalakad ka from e.rod to q.ave eh makikita mo sya sa left side. kahilera nya yun fordland, bestcolt, fordmaster..etc etc..

i suggest maglakad ka nalan at get na mukang nakapambahay ka lang. last kong punta dun eh medyo naka-semiformal ako nakalimutan itsura ko nung suki ko sa fordland. kaya medyo mahal taga sakin. kaya nung bumalik ako eh niloloko ko nalang na ageing na yun nagasikaso sakin. i forgot his name kasi hindi common banggitin.

also bring samples para hindi ka mahirapan magdescribe sa bibilhan mo.

* ronn

wala pa kong nababasa na thread about sa iban yun HID. pero nabanggit lang sakin ng visor ko sa office. tinatamad pa ko magbasa at magahanap sa panahon na to. hehehehe. busy lang sa office kasi malapit na transition.

[duskylim]

i've been using the weber with its orig settings for my engine for the past 7 years and it had no problems til now. i recently changed the diaphragm-type mitsuba electric fuel pump to a carter 4070 rotary vane electric fuel pump -- this the correct pump for the weber carb i have. can i borrow Passini's book?

HIDs.. well we can check it out on the next eb. hard to compare. but mind you... cheap HID = low quality.

what's wrong with your windows and doorlocks? power or alignment?


thanks.

Dear Sir:

The power doorlocks on my pick-up are starting to stick - they sometimes don't close properly until well after I lock the driver's side door. My guess is that the mechanism needs to be cleaned along with the contacts, and I was hoping that you guys knew a good place for this.

The same thing with the power windows, they sometimes need a lot of persuasion to open (or close) and don't respond if you press on the button - the driver's side and front passenger's side windows also need alignment.

Thanks in advance.

Regards,

Dusky Lim

[azzkkr2600]

Dear Sir:

The power doorlocks on my pick-up are starting to stick - they sometimes don't close properly until well after I lock the driver's side door. My guess is that the mechanism needs to be cleaned along with the contacts, and I was hoping that you guys knew a good place for this.

The same thing with the power windows, they sometimes need a lot of persuasion to open (or close) and don't respond if you press on the button - the driver's side and front passenger's side windows also need alignment.

Thanks in advance.

Regards,

Dusky Lim

Actuators may need cleaning and re-alignment or replacement. You only need to replace the driver-side door actuator though.

Try KMP Trading at Evangelista, Makati or along Mazford in Banawe, QC. I think they have electricians there.

[duskylim]

Sir Dusky and Ronn baka matulungan itong guy from U.S. na may mazda pickup. Need nya ng advice... Eto ung message nya.

OK my questions are related to the diesel engine. You said that your starter is on the right side looking from the front. Will I double checked mine starter on my 2.2 gas motor and its on the left side looking from the front. So with that said I don't know if my trany will work with the diesel turbo cause the starter will be right where the turbo is on the motor. I have found a importer that has a mazda turbo diesel engine but it has a auto 4x4 tranny. They told me that all I would have to do is use the bell housing off the 4x4 tranny and it would work. Do you know if this is true? I have asked on here and no one is sure cause we don't have this awesome motor over here. I have also found a import that can get me a turbo diesel with 5 speed tranny. Do you know if the bell housing would work? I guess what I am asking is do you know if anything will work(what bell housing, fly wheel, torque converter, etc)? Sorry to bother you but I really want this motor.

Just so you know how mazda crazy I am. I am getting a RHD 4 door mazda cabin importer from Australia with lots of other parts that are not available over here in the states. So I really want a mazda turbo diesel motor. Any help with information is greatly appreciated.

Thanks
Chuck//NC\MD

Dear bborces:

Apparently he wants to replace his original gas motor with a mazda turbo diesel. What's his original motor? Is his vehicle also a pick-up? What is the mazda diesel that he has in mind?

If his post is in answer to yours then I presume that he is comparing his present gas motor to your installed RF/R2 turbo diesel. If your starter is on the right (when viewing the engine from the radiator), well on my WL-31 the starter is on the LEFT side. Ganun din sa WLT-31 (turbo diesel version).

Hope this helps.

Regards,

Dusky Lim

[Muneng]

pano ba maglagay ng pictures?

[Muneng]

D ako marunong maglagay ng pictures

[Muneng]

[azzkkr2600]

pano ba maglagay ng pictures?

upload your pictures at www.photobucket.com... once you've uploaded them, copy the IMG Code and paste it in the body of your message here.

[Muneng]

[IMG][IMG][/IMG][/IMG]

[Muneng]

upload your pictures at www.photobucket.com... once you've uploaded them, copy the IMG Code and paste it in the body of your message here.

Thanks...upload na ko photo....

[azzkkr2600]

nice!

tentative second B-Series EB this Feb 27/28. post your preferred date and time. thanks!

[Muneng]

Guys ito yung pick upng kuya ko. Sira yung mga bintana d na umiikot yung ikutan at saka wala nang mga rubber yung pinto...Any suggestions kung pano ko mapapaganda...Salamat sa lahat ng mga nagreply sa message ko.

[azzkkr2600]

nice choice of color! kelan matatapos paint job?

window weatherstrips available yan sa Mazford Banawe. i also just called Mang Tony of FMC Las Pinas sarado na pala sila. i wonder where the parts were sold?

[Muneng]

[Muneng]

[azzkkr2600]

* Muneng:

Anzahl 888 Red? When's the expected date of completion?

[Muneng]

* Muneng:

Anzahl 888 Red? When's the expected date of completion?

Cant remember kung anong red yan..Tanong ko ulit sa barkada ko kung ano yung name nung red..Aikka yata ginamit nya...Hopefully matapos na yan asap..kung maayos ko na yung window mechanisms, mabilis na lang yan..Sidings at ceiling at carpet na lang, then ok na.

[chinesecarebear]

* muneng

wooow..ganda ng pagka red ng pick ng kuya mo. kano score nyo jan?

* ronn

sarado nanaman ang FMC? kala ko may bago silang project na sasakyan?
may nakita ako sa isang thread dito na may new Anfra van sila pero izusu engine na.