Results 4,271 to 4,280 of 4472
-
Verified Tsikot Member
- Join Date
- Sep 2020
- Posts
- 5
September 17th, 2020 12:35 AM #4271Saw this sir. But the sound is different. Its not a solid clunking sound. More of like slight squeak
Thanks!
Sent from my SM-A505GN using Tsikot Forums mobile app
-
September 17th, 2020 12:40 AM #4272
Have you tried already to spray some wd40 to the bushing just to see if the noise will go away? My 2.5yo M3 had this slight noise coming from the front driver side wheel. Not a clunk metal noise but can be heard when going through uneven road and speedbumps on certain angles.
After applying the same DIY fix from the video, the noise was gone for a few months. I plan to reapply some wd40 again at the next tire rotation which I do by myself.
-
Verified Tsikot Member
- Join Date
- Sep 2020
- Posts
- 5
September 17th, 2020 01:19 AM #4273Thanks for this tip sir. Will have to visit a friendly mechanic who can lift the car for me and apply wd 40.
Sent from my SM-A505GN using Tsikot Forums mobile app
-
September 17th, 2020 04:51 AM #4274
-
Verified Tsikot Member
- Join Date
- Sep 2020
- Posts
- 5
September 17th, 2020 10:18 AM #4275Thanks sir for the advise. Am unsure where exactly the noise is coming from since i have to leave the car with them (probably a mistake) and just received this diagnosis and estimate when i had to pick up the car.
I can probably try to spray WD40 in all moving parts of the front suspension mechanism and see if it disappears.
Thanks again!
Sent from my SM-A505GN using Tsikot Forums mobile app
-
September 20th, 2020 08:16 PM #4276
Saw this rim from a youtube review of a Subaru Levorg and I instantly like it!
Anyone here knows a local distributor of WedsSport?
Attachment 37347
-
Verified Tsikot Member
- Join Date
- May 2016
- Posts
- 546
September 21st, 2020 03:02 AM #4277If it's "squeaking" you hear, could also be wiper cowl. Often heard near A-pillar, driver or passenger side.
If it's "tok" , then you'll probably need coil spring insulators first. If still under warranty, bring it to Mazda Makati. See if you can talk to Rod, the service manager to explain your problem. Maybe have a clear video recording on-hand to help your case.
Otherwise, check your bushings. Lower arm front bushing takes a beating, could be worn out. Lower arm rear bushing, the big one doesn't wear out as fast and as often.
If you're trying the lubrication method, do process of elimination. That way you can easily pinpoint the source. Don't go spraying all the bushings at once, you won't figure out which one is faulty.
-
Verified Tsikot Member
- Join Date
- Sep 2020
- Posts
- 5
September 25th, 2020 12:19 AM #4278Thanks for this advice, sir
Sent from my SM-A505GN using Tsikot Forums mobile app
-
Verified Tsikot Member
- Join Date
- Feb 2010
- Posts
- 227
September 27th, 2020 06:36 PM #4279
-
Be careful with channels like "China Observer" on YouTube. There is a clear bias in their posts and...
Xiaomi E-Car