New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 239 of 410 FirstFirst ... 139189229235236237238239240241242243249289339 ... LastLast
Results 4,761 to 4,780 of 12077

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Join Date
    Nov 2015
    Posts
    30
    #1
    Quote Originally Posted by balongbalong View Post
    sorry to budge in, but yes you are correct, white easily gets dirty especially in our dusty PH condition plus rains. Wash often. black or darker colored ones likewise easily gets dirty too, and it shows more light scratches and swirls marks (from washing/drying your car) more than lighter colored cars, making them less shiny, so its harder to maintain, more detailing needed. Kalaban mo also sa white are stains, especially tree saps, leave it under the sun too long and it will become embedded in the paint. mas hindi halata stains sa dark colors. when it comes to colors, pick what you really like, you can't return it if you have second thoughts about the color and is always at the back of your mind you really liked the other color, etc.

    for warranty/yoijin3 purposes, read your warranty/yoijin3 booklet for the terms and conditions. if its indicated there na mods will void them then why risk it? honestly back up cameras to me are pretty useless for such a small car, especially if you have the sensors already, hindi naman malaking suv or closed van yun mazda3. if you really cant live without one, then buy the original mazda back up camera abroad and have them install it, so they won't have any problems with it since its orig mazda accessory. take note with generic back up cameras, depends what brand you get from china, some are poor quality, some are ok.

    is lamson selling the orig mazda back up camera? or perhaps an oem branded for mazda back up camera? or simply a generic camera?

    of course mazda distributor/dealer network will protect themselves, and an easy way out for them is to blame our mods to our cars in case certain problems arise. but sometimes can't blame them too, palpak din talaga gawa sa labas kuminsan, especially in car audio, banawe shops are known to not even solder and shrink wrap wires when they splice and reconnect them
    Nothing to apologize for. I appreciate every feedback I get ftom this discussion to help me decide din carefully since I am a newbie. Thanks sir!

    And I hear you. You gave good points from what you have said. I will think all about this carefully.

    One thing though with the backup cam, it's just that when I was practicing my driving, it was in a Honda City with a backup camera installed. Nakasanayan ko lang siguro and it's a bummer na hindi siya standard across Mazda 3 variants, so naisip ko lang na magpa-install as most of the guys here also did. I haven't tried driving with just the reverse parking sensors. Might as well check na lang din muna kung kaya ko naman without the cam kapag narelease yung unit ko by December. Hehehe

  2. Join Date
    Jan 2015
    Posts
    12,396
    #2
    Quote Originally Posted by Louie Anson Ng View Post
    sir naayos na ata namin yung issue na yan with our current batch of cameras. dati kasi may converter pa kaming inaattach sa camera, ngayon built in na sa camera mismo yung converter. regardless, kung nasanay na rin kayo na walang camera tinitignan it's all good, hehe. with regards dun sa smell it's possible na di naka-on yung air circulation mode dun sa air vents dahil pag nagdisconnect ng battery from the terminal for a period of time nagrereset yung settings. it's just a possibility though, not sure kung yung mode na yun kasama sa settings na narereset.
    There!!!!!
    Service. Experience,. Knowledge. Support.
    or simply...SEKS...
    the credo of Mast3r Louie Anson Ng.

  3. Join Date
    Jul 2015
    Posts
    128
    #3
    Quote Originally Posted by travajante View Post
    There!!!!!
    Service. Experience,. Knowledge. Support.
    or simply...SEKS...
    the credo of Mast3r Louie Anson Ng.
    That acronym... must be used by all service shops 😂😂😂

  4. Join Date
    Jun 2006
    Posts
    222
    #4
    Quote Originally Posted by homiee View Post
    That acronym... must be used by all service shops 😂😂😂
    I totally agree.

  5. Join Date
    Jul 2015
    Posts
    17
    #5
    Quote Originally Posted by travajante View Post
    There!!!!!
    Service. Experience,. Knowledge. Support.
    or simply...SEKS...
    the credo of Mast3r Louie Anson Ng.
    Sir trav..
    You're one of the main reasons i enjoy and love reading this thread!!!
    With those type of comments.. hahaha!

  6. Join Date
    May 2015
    Posts
    280
    #6
    Quote Originally Posted by shonen View Post
    Sir trav..
    You're one of the main reasons i enjoy and love reading this thread!!!
    With those type of comments.. hahaha!
    Hahahaha! Sir Travs is the SEKS-KING.

    Seriously though, Travs is the MAN! Don't mistaken him for his funny-sometimes-dirty humor. He's a real gentleman and VERY knowledgeable when it comes to this passion.

    - - - - - - - - - - - - - - - - - - - - - -

    Quote Originally Posted by shonen View Post
    Sir trav..
    You're one of the main reasons i enjoy and love reading this thread!!!
    With those type of comments.. hahaha!
    Hahahaha! Sir Travs is the SEKS-KING.

    Seriously though, Travs is the MAN! Don't mistaken him for his funny-sometimes-dirty humor. He's a real gentleman and VERY knowledgeable when it comes to this passion.

  7. Join Date
    Jan 2015
    Posts
    12,396
    #7
    Haha.. Fun is a huge part of Mown3rship.

  8. Join Date
    Jan 2015
    Posts
    12,396
    #8
    Quote Originally Posted by homiee View Post
    "There!!!!!
    Service. Experience,. Knowledge. Support.
    or simply...SEKS...
    the credo of Mast3r Louie Anson Ng."

    That acronym... must be used by all service shops 😂😂😂
    Quote Originally Posted by sparcom View Post
    I totally agree.
    Quote Originally Posted by shonen View Post
    Sir trav..
    You're one of the main reasons i enjoy and love reading this thread!!!
    With those type of comments.. hahaha!
    Haha. And you guys are the reason why we're all here.......
    The TRUTH doesn't have to hurt all the time, sir..:D

    So, you all seem to agree to Mast3r Anson's new slogan????
    LAMSON ELECTRONICS
    Where Great SEKS Happens....:D

    A good day, y'all!!!:D

  9. Join Date
    Jan 2015
    Posts
    12,396
    #9
    Taiwanese MST intake w/ heat shield on what seems to be a PH M3.....



    Dear soul red Mown3r...do you happen to be here? Care to share the source of that intake?
    Or can anyone clean up the pixels on the plate? Haha.

  10. Join Date
    Jan 2015
    Posts
    12,396
    #10
    Quote Originally Posted by justdiy View Post
    Hahahaha! Sir Travs is the SEKS-KING.
    Seriously though, Travs is the MAN! Don't mistaken him for his funny-sometimes-dirty humor. He's a real gentleman and VERY knowledgeable when it comes to this passion.
    Hahaha, justdiy brah, thanks, but Mown3rs on here might believe the myth you just muttered.:D......you very well know I'm just a hypocrite charlatan poser who passes on whatever useful bits & junk that's out there. The dirty stuff were just rubbed on by Marc, Hatch, Manskee, Geo, Jet & you.....BIs. Hahaha.:D

  11. Join Date
    Jul 2015
    Posts
    114
    #11
    Sharing my recent mod and the result:
    > Tein HTech lowering springs, spring rate or stiffness closest to stock, mild drop at two fingers remaining wheel gap, Japan made, 15K pesos total damage.
    > Recently tested in Tanayburgring curves and steep rough roads, no scrape or rub at all, the feeling of not lowered, all aspects improved such as - ride, cornering, brake dive, acceleration launch, weight, even fuel consumption!
    > Special thanks to patients with Tein-itis and Rota-itis, brothers James, Geo, Marc, and Manskee.
    Attached Thumbnails Attached Thumbnails 1448521264729.jpg  

  12. Join Date
    Aug 2010
    Posts
    327
    #12
    Quote Originally Posted by Hot Hatch View Post
    Sharing my recent mod and the result:
    > Tein HTech lowering springs, spring rate or stiffness closest to stock, mild drop at two fingers remaining wheel gap, Japan made, 15K pesos total damage.
    > Recently tested in Tanayburgring curves and steep rough roads, no scrape or rub at all, the feeling of not lowered, all aspects improved such as - ride, cornering, brake dive, acceleration launch, weight, even fuel consumption!
    > Special thanks to patients with Tein-itis and Rota-itis, brothers James, Geo, Marc, and Manskee.
    If you bring this to the casa for maintenance, do they immediately tell you that your Yojin3 is voided?

  13. Join Date
    Nov 2015
    Posts
    30
    #13
    Hello mga sir! Just got my Mazda 3 2016 maxx. Pano join sa group sa FB?thanks

  14. Join Date
    Oct 2015
    Posts
    12
    #14
    Quote Originally Posted by Krisace View Post
    Hello mga sir! Just got my Mazda 3 2016 maxx. Pano join sa group sa FB?thanks
    I think they only allow Skyactive Mazda 3's in. And you have to pay a membership fee of P1,000.


    Sent from my iPhone using Tapatalk

  15. Join Date
    Jan 2015
    Posts
    12,396
    #15
    Quote Originally Posted by Hot Hatch View Post
    Sharing my recent mod and the result:
    > Tein HTech lowering springs, spring rate or stiffness closest to stock, mild drop at two fingers remaining wheel gap, Japan made, 15K pesos total damage.
    > Recently tested in Tanayburgring curves and steep rough roads, no scrape or rub at all, the feeling of not lowered, all aspects improved such as - ride, cornering, brake dive, acceleration launch, weight, even fuel consumption!
    > Special thanks to patients with Tein-itis and Rota-itis, brothers James, Geo, Marc, and Manskee.
    The Hatch speaks..... The pack's chosen Ring Pacer. The One who navigates thru every twist, hairpin, dip, slope & pothole.... by memory more than vision. His reflexes, lightning quick. His caffeine fix, speed....
    He is our KING....
    True sacred words have been spoken! These TEINs...a must have.

  16. Join Date
    Jan 2015
    Posts
    12,396
    #16
    Quote Originally Posted by Krisace View Post
    Hello mga sir! Just got my Mazda 3 2016 maxx. Pano join sa group sa FB?thanks
    Quote Originally Posted by francistan View Post
    I think they only allow Skyactive Mazda 3's in. And you have to pay a membership fee of P1,000.
    Sent from my iPhone using Tapatalk
    Worry not, outside the concert hall, the music is loud enough to be heard & felt....
    Call this here your halfway house, home, refuge or purgatory. It's open & it's free.

  17. Join Date
    Jan 2015
    Posts
    12,396
    #17
    The M3 will get a1.5 litre SkyActiv-D diesel engine in the UK, it was announced recently.
    Power output for the 1.5 litre SkyActiv-D diesel engine is rated at 105 PS at 4,000 rpm and 270 Nm from 1,600-2,500 rpm. The engine features a compression ratio of 14.8:1, exhaust gas recirculation and Mazda’s i-stop idle-stop system.
    The engine is available for both the hatchback and Sedan. When mated to a six-speed SkyActiv-MT gearbox, the engine emits just 99 g/km, and is capable of returning a combined fuel economy of 31.58 km/l. Only the hatchback version of the 3 gets the option of a six-speed SkyActiv-Drive automatic gearbox.
    When will PH get Euro5 diesel????

  18. Join Date
    Oct 2006
    Posts
    6,496
    #18
    Saw a heavily modded Mz3 (springs, rims, unichip, brakes and K&N pod filter) being serviced at Mazda Noth EDSa when they released our Mz2. Sabi nung SA wala na daw warranty at free PMS.

  19. Join Date
    Jun 2006
    Posts
    222
    #19
    Quote Originally Posted by Yatta View Post
    Saw a heavily modded Mz3 (springs, rims, unichip, brakes and K&N pod filter) being serviced at Mazda Noth EDSa when they released our Mz2. Sabi nung SA wala na daw warranty at free PMS.
    For example i will upgrade my 16 oem rims to 18 oem rims, will it void my warranty?

  20. Join Date
    Jan 2015
    Posts
    278
    #20
    Quote Originally Posted by sparcom View Post
    For example i will upgrade my 16 oem rims to 18 oem rims, will it void my warranty?
    Mine initially upgraded the 16s to oem 18s. Had 2 PMS and SA saw the 18s (techs even checked tread wear), then saw the oem 19s but was never told that warranty's already voided.

    Just in case you want to change to oem 18s, i know a friend selling his oem 18s. ☺

Tags for this Thread

2014 Mazda 3