2014 Mazda 3

[go-to-guy]

I'm still on 29...I think & I'm feeling extinction all over again...Hahaha

Just checked mine I'm on ver. 33 so I guess inupdate nila last PMS ko in June:what:

[aLbEe]

Sir Testa question. I got my M3 with this FW. Can this be hacked and be added the video player app?



Also, this version has Wifi already enabled.

[plainBlack]

follow-up question ulit mga masters..
Nadownload ko na po ung cmu150 (failsafe+reinstall), extracted na sa flashdisk..ngayon sir,
paano po pala i-install ung FW update via usb? plug n play lang ba tapos lilitaw na mga steps sa monitor naten sir? next next nalang parang windows installer software? hehe

- - - - - - - - - - - - - - - - - - - - - -

follow-up question ulit mga masters..
Nadownload ko na po ung cmu150 (failsafe+reinstall), extracted na sa flashdisk..ngayon sir,
paano po pala i-install ung FW update via usb? plug n play lang ba tapos lilitaw na mga steps sa monitor naten sir? next next nalang parang windows installer software? hehe

[testament11]

Sir testa, naconnect ko na un mz3 sa android hotspot pero di ko pa rin nakita ung lP address pasensya na po madami tanong...
Thanks

Check wifi properties sa settings. Makikita mo doon kung anong mga devices ang naka-connect sa hotspot mo at the same time yun IP address ng mga naka-connect na devices

Sir Testa question. I got my M3 with this FW. Can this be hacked and be added the video player app?



Also, this version has Wifi already enabled.

Same firmware na tayo and good thing na yan din pala ang firmware ng mga current batches ng Mz3. Now hack-able or not, yes it is hack-able!

[JohnM]

follow-up question ulit mga masters..
Nadownload ko na po ung cmu150 (failsafe+reinstall), extracted na sa flashdisk..ngayon sir,
paano po pala i-install ung FW update via usb? plug n play lang ba tapos lilitaw na mga steps sa monitor naten sir? next next nalang parang windows installer software? hehe

The instructions are here: The Infotainment Project - Page 194 - 2004 to 2014 Mazda 3 Forum and Mazdaspeed 3 Forums

Your USB should only contain the two ".up" files. You don't have to extract them.

Good luck

Good news na v56 na rin pala ang casa update. No need to have mine updated on the next PMS

[travajante]

Hi fellow mown3rs,

I was going over a steel ramp yesterday when its other side lifted and hit my underbody. It tore a hole 6 inches in diameter on the plastic cover near the left rear wheel. Is this something that needs to be replaced immediately? How would it affect my ride? Thanks!

Pics could help us help you better, Mr. Bond sir. Drove it like your DB10, eh?

[agent_007]

hehe. here's the pic. the hole exposed some cables and the metal underneath. Is this cover used to protect them from water?

[JohnM]

hehe. here's the pic. the hole exposed some cables and the metal underneath. Is this cover used to protect them from water?

Ouch. That's the under cover. Helps protect the undercarriage and also aids aerodynamics. You can opt to use your insurance and replace the part.

[agent_007]

my participation fee is around 5k. do you think it cost more than that?

[go-to-guy]

Just curious, ano pwede ipalit sa stock headlamps ng 1.5 that won't cause any burn? I read that Osram Nightbreakers are good. Nagagandahan kasi ko sa white. Don't know if LEDs are more adviseable. Pati interior lights gusto ko palitan and I read Corksport brand was good pero wala naman ata dito nun tsaka mahal pa ata. Lastly can anyone suggest where they can install these lights sa south area (tsaka yung maingat maginstall, hehe. Medyo bothered ako pag bara-bara pagkabit ng accessories/parts sa car e kaso i can't DIY din naman. Thanks!

[travajante]

Just curious, ano pwede ipalit sa stock headlamps ng 1.5 that won't cause any burn? I read that Osram Nightbreakers are good. Nagagandahan kasi ko sa white. Don't know if LEDs are more adviseable. Pati interior lights gusto ko palitan and I read Corksport brand was good pero wala naman ata dito nun tsaka mahal pa ata. Lastly can anyone suggest where they can install these lights sa south area (tsaka yung maingat maginstall, hehe. Medyo bothered ako pag bara-bara pagkabit ng accessories/parts sa car e kaso i can't DIY din naman. Thanks!

Geo_S can help you here.

[plainBlack]

Thanks sir testa and sir john! Noted! Bookmarked! Astig kayo!

[plainBlack]

ATM:

Ver33 to ver56

So far so good! Smooth ang procedure. Salamat sir testa at sir john! Rock on!

Next ang add on, video player at gauges.

[testament11]

ATM:

Ver33 to ver56

So far so good! Smooth ang procedure. Salamat sir testa at sir john! Rock on!

Next ang add on, video player at gauges.

Full na inbox mo sir. Dito nalang ako magrereply.

Malamang hindi ka nagreset ng system. Press mute+navi+back buttons para mag-restart ang system

[bhybhoy]

Sir try mo to

Connect mo sa Android Hotspot ung mazda mo.

Tapos using a 2nd android phone, connect ka din sa Hotspot.

Install this app on the 2nd android phone: https://play.google.com/store/apps/d...238.1447167193

Dapat makikita mo na ip Address ng mazda using the app

Sir
Thanks po
Nakita ko na ung lP address

[travajante]

hehe. here's the pic. the hole exposed some cables and the metal underneath. Is this cover used to protect them from water?

Don't worry about it. Nothing likely happened. That huge hole is on every gen3 M3. Check others out.

[agent_007]

Don't worry about it. That huge hole is on every other gen3 M3. Check em out.

Not that one. It's the banana-shaped hole in the middle of the pic.

[travajante]

Not that one. It's the banana-shaped hole in the middle of the pic.

Ooooh that...apologies for being dumbfounded a minute there. You actually tore partially that plastic?
I wouldn't worry about that either unless you damaged the underchassis structurally or tweaked its alignment or punctured some brakelines, scraped some wires or something feels off. . ..Have it checked by the dealership to be sure.

If it costs too much for an invisible liner, I'd DIY fix that. You can either solder/rivet/bolt/PU adhere some black ABS/uPVC/acrylic/sintra(non-metal) sheet above & between the car & the cover.

[plainBlack]

Thank you very much sir travs! The relocator kit rocks.

My smallmouth grill conversion:

[travajante]

Thank you very much sir travs! The relocator kit rocks.

My smallmouth grill conversion:

Whoah!!!! Whatta DIY!!!! Just looks sooo OE!!! A big M2 there!!!!
Grats & thanks, plainBlack sir!!!

Anyone wanting the No-drill plate relocator, just please email
satravajante*gmail.com
Thanks!