2014 Mazda 3

[travajante]

Nice. want to get 1!! just one query sir travs, wouldn't that block air intake or what not?

Exactly the question I asked myself over a year ago when I developed this mod.
So, to appease my OCD, I hooked my scangauge fulltime.... logged coolant, intake temps w/ & w/o the relocator.....in standstill traffic jams, up the slopes, twisties & long straights..spiritedly...during awefully hot days as well. Surprisingly, I never found them to be beyond working temps.
I've had the relocator on a year now & I've never seen 3 digit temps hit this M3 that I've seen in my other cars. I'm amazed at the cooling system & this is a high compression engine!
Had I seen anything alarming, I'd be the 1st to run as far away from this mod.
Look into the bumper, you'll see lotsa room for air. This relocator lets the plate sit way out front free of the bumper lip, too. I believe that helped.
If you compare the M6 lower grille+plate, you'll see there isn't much difference. It may even draw less air by having the plate bolted onto the bumper face.
M6:

M3:

Thanks for the interest, sir, & for bringing up this vital point that was my 1st & foremost concern. I hope I had addressed the question, sir tolits.

[Joseph Madera]

Hello guys my first post

can anyone recommend me a good and reliable SR around metro manila perhaps
thanks a lot! got my loan approval already im planning to get a silver 1.5v HB and hopefully this will
be my first car.

- - - - - - - - - - - - - - - - - - - - - -

[jp923]

Hello guys my first post

can anyone recommend me a good and reliable SR around metro manila perhaps
thanks a lot! got my loan approval already im planning to get a silver 1.5v HB and hopefully this will
be my first car.

- - - - - - - - - - - - - - - - - - - - - -

Im happy with my SA in Q ave. His name is Paolo Peru. Very accomodating and responses to my queries even thru text almost instantly.

[Hot Hatch]

Exactly the question I asked myself over a year ago when I developed this mod.
So, to appease my OCD, I hooked my scangauge fulltime.... logged coolant, intake temps w/ & w/o the relocator.....in standstill traffic jams, up the slopes, twisties & long straights..spiritedly...during awefully hot days as well. Surprisingly, I never found them to be beyond working temps.
I've had the relocator on a year now & I've never seen 3 digit temps hit this M3 that I've seen in my other cars. I'm amazed at the cooling system & this is a high compression engine!
Had I seen anything alarming, I'd be the 1st to run as far away from this mod.
Look into the bumper, you'll see lotsa room for air. This relocator lets the plate sit way out front free of the bumper lip, too. I believe that helped.
If you compare the M6 lower grille+plate, you'll see there isn't much difference. It may even draw less air by having the plate bolted onto the bumper face.
M6:

M3:

Thanks for the interest, sir, & for bringing up this vital point that was my 1st & foremost concern. I hope I had addressed the question, sir tolits.

Exactly the reason why I am holding back on plate relocation but you proved there is nothing to worry about, travajante sir. I want one... ASAP! =)

[tolitsaso]

thanks for the interest, sir, & for bringing up this vital point that was my 1st & foremost concern. I hope i had addressed the question, sir tolits.

please get 1 for me

[Bikeage_]

Exactly the question I asked myself over a year ago when I developed this mod.
So, to appease my OCD, I hooked my scangauge fulltime.... logged coolant, intake temps w/ & w/o the relocator.....in standstill traffic jams, up the slopes, twisties & long straights..spiritedly...during awefully hot days as well. Surprisingly, I never found them to be beyond working temps.
I've had the relocator on a year now & I've never seen 3 digit temps hit this M3 that I've seen in my other cars. I'm amazed at the cooling system & this is a high compression engine!
Had I seen anything alarming, I'd be the 1st to run as far away from this mod.
Look into the bumper, you'll see lotsa room for air. This relocator lets the plate sit way out front free of the bumper lip, too. I believe that helped.
If you compare the M6 lower grille+plate, you'll see there isn't much difference. It may even draw less air by having the plate bolted onto the bumper face.
M6:

M3:

Thanks for the interest, sir, & for bringing up this vital point that was my 1st & foremost concern. I hope I had addressed the question, sir tolits.

Hi sir travajante, gusto ko sana maka score ng mazda 3 plate relocation kit sana meron ka pa, interesado kasi akong bumili... Thank you

[travajante]

Hi sir travajante, gusto ko sana maka score ng mazda 3 plate relocation kit sana meron ka pa, interesado kasi akong bumili... Thank you

Hello sir, please email satravajante*gmail.com
Thanks!

[Bikeage_]

Hello sir, please email satravajante*gmail.com
Thanks!

Hi Sir, email sent. Thank you very much!

[travajante]

Hi Sir, email sent. Thank you very much!

Replied, sir. Thanks.

[justdiy]

Hi sir travajante, gusto ko sana maka score ng mazda 3 plate relocation kit sana meron ka pa, interesado kasi akong bumili... Thank you

Email him * satravajante*gmail.com.

[Bikeage_]

Email him * satravajante*gmail.com.

Salamat na email ko na siya.

[travajante]

Exactly the reason why I am holding back on plate relocation but you proved there is nothing to worry about, travajante sir. I want one... ASAP! =)

PM sent, Hatch brah!

[kirito]

Regarding the plate relocator, i'd love to have one but my plate is screwed (pun intended) with the new lto screws, can this still be removed, and also what to do with the nasty drill holes exposed?? Also wary that the plate will be sitting lower than the bumper, as it is sumasayad na sya in our inclined garage. Your thoughts dear mown3rs

[travajante]

Regarding the plate relocator, i'd love to have one but my plate is screwed (pun intended) with the new lto screws, can this still be removed, and also what to do with the nasty drill holes exposed?? Also wary that the plate will be sitting lower than the bumper, as it is sumasayad na sya in our inclined garage. Your thoughts dear mown3rs

How are yah, kirito brah? I just had the same exact question PM'd.
My OCD preference would be bumper removal to unscrew those nuts from behind. A dremel or worse, a drill, can do a quick risky messy trick in bolt head shaving, but I know you might samurai yourself for scarring the plate or the grille!
If you still got that fart of a horn, this is the perfect time to hit 2 birds w/ a shot.
The plate backer is pre-drilled to sit just a tiny tad below that front bumper edge. You can drill new holes to bring the backer higher or lower, whichever your preference may be.
Had mine on for a lil over a year now. It has withstood everything it has seen & remained pristine.
I sensed Mazda kinda tried to uglify their Masterpiece3 so not to outclass the higher 6. They succeeded, but I just couldn't concede defeat....
Can you, kirito brah? Thanks much for chiming. Everyone's 2cents are always welcome!👍

[travajante]

please get 1 for me

Noted, tolits sir. If you have alternate contact details for me to keep you in the loop, please PM me. Thanks much.

[travajante]

Sir you can go to Red Central near SM North Edsa. Or if you are a member of the FB group, you can ask Gilbert Chan. Let me know if you need help.

Ahh, guys, you can't go wrong w/ the ModFath3r's(Gilbert) awesome mods!👍

[jp923]

Finally got mine after 13 excruciating days of waiting! Now, how to join that elusive group on Facebook? Haha

[Geo_S]

Finally got mine after 13 excruciating days of waiting! Now, how to join that elusive group on Facebook? Haha

Congrats bro on your Mz3!! 👍

Please go to Mazda 3 SkyActiv Club PH closed group and post a pic with your Mz3 (i suggest you make it as your pic profile) so admin Ritz Marcelino can add you up.

[Slip]

Finally got mine after 13 excruciating days of waiting! Now, how to join that elusive group on Facebook? Haha

Only 13 days? your lucky i've waited 2 months! now i'm waiting for the or/cr its been 3 weeks. hoping to get it next week.

[jp923]

Only 13 days? your lucky i've waited 2 months! now i'm waiting for the or/cr its been 3 weeks. hoping to get it next week.

Credits to my SA sir, Paolo Peru of Mazda Q ave haha he made it happen for me. Also to the guy who backed out of his reservation for some reason I couldn't understand [emoji16]