2014 Mazda 3

[chrisgabinete]

My RJ wants to say Hi!

[travajante]

Hi sirs, any advice on the cheapest way to get the racing beat mufflers for our mazda 3? hatchback dual tip. TIA!

Shipping is the real pain that shoots up what's actually a great value catback.
I once tried to ship a full exhaust system thru a buddy in the US. He repacked it into a Bbox & an irregular long 1 then sent door-door for around $120....3 agonizing months of patience therapy that was, but got to me intact & unscathed.
SpeedLab quoted the FB group Php35k a few mos back for that Racing Beat axleback all in.
Mine? A big-hearted buddy loaded that in his container. To this day, gratitude fills me.

[win10888]

Shipping is the real pain that shoots up what's actually a great value catback.
I once tried to ship a full exhaust system thru a buddy in the US. He repacked it into a Bbox & an irregular long 1 then sent door-door for around $120....3 agonizing months of patience therapy that was, but got to me intact & unscathed.
SpeedLab quoted the FB group Php35k a few mos back for that Racing Beat axleback all in.
Mine? A big-hearted buddy loaded that in his container. To this day, gratitude fills me.

Thank you sir travajante. Based on my calculations total would reach 31k if I buy it from the US. Maybe I should give speedlab a call 4k difference seems ok if there would be no more waiting time.

I envy you sir I hope I have a friend just like yours!

[travajante]

My RJ wants to say Hi!

BlackMouth the Hypocrite says hi back, Father.

[xonx]

BlackMouth the Hypocrite says hi back, Father.

Those black rims look great on the Aluminum Grey. Maybe that should be my first upgrade.

[travajante]

travs sir. just to give an update, went to the casa last Saturday to have my M3 checked. They plugged in the unit into their computer and oddly, they were not able to find any code. All tests showed as passed. I was looking the whole time they were doing the diagnostic tests and confirm that nothing shows. Asked them why this happened and they told me that they really can't tell pinpoint why if there is no code.

They proceeded to clean the filters instead and checked all wirings. they asked me to observe and capture if ever this happens again. CEL has not re-occured to date

Hmmmm, I'd not worry until it happens again or a code pops. Cars these days have way too much electronics & we know gremlins/hiccups can occur sometimes. Even on the best & most bullet proof, fluke happens. Let's pray that's all twas.🙏
Stalling & cranking w/ no start usually point to ignition, fuel distribution, battery/charging & all the sensors dictating the ecu...that's a lot to cover w/ no code.
Again, as a precaution, never run on empty. Gas up when tank hits 1/4....that's what I always do.
And, this is where an OBD gauge can help...it tells you how the car is behaving. From charging, temps, etc. It may not be a must-have, but I've long been an advocate. There are hobo cheap versions.
Just enjoy & observe.
Happy motorin'!!!!

[travajante]

Thank you sir travajante. Based on my calculations total would reach 31k if I buy it from the US. Maybe I should give speedlab a call 4k difference seems ok if there would be no more waiting time.

I envy you sir I hope I have a friend just like yours!

SpeedLab might not stock em....but for about the price of RB axleback, Sid can custom build for you.....
Or call out GrandMast3r Geo_S. He's got 1 heck of an exhaust mod that you might just fall for * ZERO cost...yes, ZERO.
On that friend you envy having, I honestly may be grossly unworthy of the blessings of true friendships that surround me. Humbled & grateful. They are immensely valued & are among the many reasons to thank God for each day.🙏

[travajante]

Those black rims look great on the Aluminum Grey. Maybe that should be my first upgrade.

Thanks, but those in the flesh are actually dark gunmetal in satin finish. Not quite black but close, xonx sir.
Never was a fan of dark rims as they tend to look smaller than they actually are; they change the persona from genteel to mean; & the rim design gets lost in the wheel well.....but I couldn't pass up the wheel swap opportunity w/ some help off buddies & BlackMouth has been a known schizophrenic mutant since birth.:D

[Walter]

Is there a website that explains how to lower the license plate mounting? Couldn't find any online.

[Geo_S]

Bro Walter, are you planning to have your Mazda plate relocated? There are no official site where you can find one because those plate relocation were DIYd which came from bro Travs prototype. If yes, let's wait for bro Travs plate relocator. It'l be out in the market soon and will be available for Mz2 and Mz3..

[travajante]

Bro Walter, are you planning to have your Mazda plate relocated? There are no official site where you can find one because those plate relocation were DIYd which came from bro Travs prototype. If yes, let's wait for bro Travs plate relocator. It'l be out in the market soon and will be available for Mz2 and Mz3..

Thanks for the pitch, brah. The GrandMast3r Geo has had exclusive access to the painstaking development of the soon-to-debut M6 spec plate relocator. The mod is made extremely easy in 2 steps & about 5mins....currently in final stages of QC. Praying for patience, brothahs!
Updates to follow. Thanks!

[carchayser]

How much discount did you get from purchasing your unit? Planning to purchase mz3 2.0 kasi. Could you guys recommend a sales agent? Thanks!

[testament11]

How much discount did you get from purchasing your unit? Planning to purchase mz3 2.0 kasi. Could you guys recommend a sales agent? Thanks!

AFAIK, wala pa rin discount para sa Mz3 dahil considered as hot unit pa rin ito ngayon. What you can do eh makipag-haggle ka ng freebies nalang sa ahente mo like free full tank gas, rain visors, etc etc. Saan mo ba plano kumuha ng Mz3 kung sakali?

[carchayser]

AFAIK, wala pa rin discount para sa Mz3 dahil considered as hot unit pa rin ito ngayon. What you can do eh makipag-haggle ka ng freebies nalang sa ahente mo like free full tank gas, rain visors, etc etc. Saan mo ba plano kumuha ng Mz3 kung sakali?

Hi sir, planning to purchase mine at Mazda North Edsa kasi yun ang pinakamalapit. I see so sa accessories lang babawi. Sige thanks for the tip!

[Yatta]

Hi sir, planning to purchase mine at Mazda North Edsa kasi yun ang pinakamalapit. I see so sa accessories lang babawi. Sige thanks for the tip!

Try Ms. Rocel Magallanes, sabihin mo recommended ni Paul yung kumuha ng Mz2. Wala talaga discounts kasi di nga nila ma-fill-up yung demand so prepare to wait (yung isa nga waited 2 months). But the Yojin3 program I think more than makes up for the lack of discounts.

- - - - - - - - - - - - - - - - - - - - - -

Hi sir, planning to purchase mine at Mazda North Edsa kasi yun ang pinakamalapit. I see so sa accessories lang babawi. Sige thanks for the tip!

Try Ms. Rocel Magallanes, sabihin mo recommended ni Paul yung kumuha ng Mz2. Wala talaga discounts kasi di nga nila ma-fill-up yung demand so prepare to wait (yung isa nga waited 2 months). But the Yojin3 program I think more than makes up for the lack of discounts.

[travajante]

Is there a website that explains how to lower the license plate mounting? Couldn't find any online.

Here's a sneak peek of what's about to be made available to SkyActiv Mown3rs wanting the M6 front plate location. The M2 version may soon follow.
It's a no-drill, totally reversible & complete plate relocator kit which makes the mod super quick & easy in 1 go. You may PM me for details.


Thanks.

[rappp]

Here's a sneak peek of what's about to be made available to SkyActiv Mown3rs wanting the M6 front plate location. The M2 version may soon follow.
It's a no-drill, totally reversible & complete plate relocator kit which makes the mod super quick & easy in 1 go. You may PM me for details.


Thanks.

Nice one sir travs! Pm sent :-P

[tolitsaso]

Here's a sneak peek of what's about to be made available to SkyActiv Mown3rs wanting the M6 front plate location. The M2 version may soon follow.
It's a no-drill, totally reversible & complete plate relocator kit which makes the mod super quick & easy in 1 go. You may PM me for details.


Thanks.

Nice. want to get 1!! just one query sir travs, wouldn't that block air intake or what not?

[dmjude]

Hi...
I've been looking for a no drill plate relocator like the ones you posted.. My car is a hatchback mazda3 2017 model..

Do you have one for sale?

My number is
0915 599 7019

email
dmjude*gmail.com

[travajante]

Hi...
I've been looking for a no drill plate relocator like the ones you posted.. My car is a hatchback mazda3 2017 model..

Do you have one for sale?

My number is
0915 599 7019

email
dmjude*gmail.com

PM'd you, sir. Thanks!

Sent from my SM-G950F using Tapatalk