2014 Mazda 3

[jcal68]

Mga sirs kasya ba si vossen cv5 (18x8 5x114 e40) sa mz3 natin without any issue?

Yup. I saw M3's with 18 x 8 with et 40 on 225 x 45's.

[Walter]

Undercoating is just a scheme by dealers to earn more. It's not necessary anymore.

[jazz0821]

guys noob question lang, kung magpapa install ng tint kagad sa new car, di ba nila papatungan un conduction sticker?

[go-to-guy]

guys noob question lang, kung magpapa install ng tint kagad sa new car, di ba nila papatungan un conduction sticker?

Nasa labas naman conduction sticker and the tint is installed inside

[travajante]

Mga sirs kasya ba si vossen cv5 (18x8 5x114 e40) sa mz3 natin without any issue?

Stay et45 up & play w/ spacers, sir, in case you'd succumb to the temptation of lowering.

[mang_pogs]

got my mz3 2.0 serviced * alabang for 20T km. As usual had a great experience. very accomodating sila even Late ak 1hr. Took around 2hrs before ak nkalabas ng casa. Didnt pay anything as well. Ang kulang lang cgro is the list of things na ginawa nila but the s.a said i can request for it next time. As for fuel consumption, mine is 7.8li/100km.

After Mazda went straight to atc and saw the new honda hrv mugen edition. Quite a looker too but a bit pricey (1.5million with just 1.8 engine).

There's a new mazda dealership and service center * sta rosa laguna, just across paseo. anyone here tried their service?

[Slip]

Hi guys this thread is very informative just finish back reading it took me awhile 300+ page. well it's worth it and knowing everybody here exchange information and help each other. Reading just made me more excited on my incoming car i just hope everything go smoothly. as i read no one mention they acquire a Mazda 3 at Mazda North Edsa? Hope to join the Club ASAP.

[macsd]

After Mazda went straight to atc and saw the new honda hrv mugen edition. Quite a looker too but a bit pricey (1.5million with just 1.8 engine).

There's a new mazda dealership and service center * sta rosa laguna, just across paseo. anyone here tried their service?

Yup, saw that HRV display at ATC yesterday as well. Now i'm having second thought whether to switch may order of M3 2.0R since waiting pa rin to the HRV L. Wifey & bunso is making kulit for HRV.

My order of M3 is at Sta Rosa. Known my SA & service head there since Ford Alabang days. Very supportive sila at madaling kausap, just go straight to the point.

[mang_pogs]

My order of M3 is at Sta Rosa. Known my SA & service head there since Ford Alabang days. Very supportive sila at madaling kausap, just go straight to the point.

bro whats the name of the service head? i might try them on my next pms. As for the HRV, i find the non-mugen variant a biT boring on the outside, would stick with mz3 If i were you. You wont regret a thing inside/outside

- - - - - - - - - - - - - - - - - - - - - -

My order of M3 is at Sta Rosa. Known my SA & service head there since Ford Alabang days. Very supportive sila at madaling kausap, just go straight to the point.

bro whats the name of the service head? i might try them on my next pms. As for the HRV, i find the non-mugen variant a biT boring on the outside, would stick with mz3 If i were you. You wont regret a thing inside/outside

[macsd]

bro whats the name of the service head? i might try them on my next pms. As for the HRV, i find the non-mugen variant a biT boring on the outside, would stick with mz3 If i were you. You wont regret a thing inside/outside

Look for Mark Fernandez. Your right, M3 hatch looks better than HRV plus the gas consumption & the 3 yrs free PMS. But then again, this country's road condition is more for SUV than a sedan.

[garcescraig]

Yup. I saw M3's with 18 x 8 with et 40 on 225 x 45's.

Stay et45 up & play w/ spacers, sir, in case you'd succumb to the temptation of lowering.

Points well taken sirs. My follow up questions:

(1) wala bang issue with with 5x114 lug pattern granting na dapat 5x114.3 dapat?

(2) since wala naman akong plans to lower the car, does that mean that i can go down all the way to et35?

Many thanks!

[travajante]

5x114 is just short for 114.3 or 4.5". So, no issues there. Et35 is 15mm outwards of factory et50. Expect rubbing, unless you stretch tires & apply ample negative hind camber.

[jazz0821]

^ yup agree with you slip, ako din waiting for my unit nalang from Quezon Ave naman. sobrang ok un thread naten dito sa mazda 3 daming willing tumulong.

[travajante]

A funny proof of how the HRV is expected to pale beside a CX3 is in this comparo where all the HRV specs are known & not much of the 3 is disclosed. Haha....
2016 Honda HR-V vs 2016 Mazda CX-3 - The Car Connection

Honestly & sadly, the HRV doesn't excite....Then again, my preferences don't agree with most & are therefore irrelevant & insignificant.

[Walter]

Also ... if only the Honda HR-V looked better.

[fireice2]

Also ... if only the Honda HR-V looked better.

:clap1::clap1::clap1: Nice one! :D

[plainBlack]

Done with my project. Share ko lang.. astig pala rims ng Lancer GTA sa M3, swabeng "Euro-look"..

[jcal68]

Nice. . .looks better than stock 16's. How's the ride?

[plainBlack]

Nice. . .looks better than stock 16's. How's the ride?

Honestly sir, im expecting na 'matagtag' ang ride niya, gladly, hindi naman pala ganun ma-ccompromise ang comfort.. Ayos na ayos biyahe namin pampanga-to-pangasinan, kasama si misis at si baby.. Mahimbing tulog ni junior.. So for me, satisfied na sa ride comfort.

[dos2]

Done with my project. Share ko lang.. astig pala rims ng Lancer GTA sa M3, swabeng "Euro-look"..

When you mentioned this, I never imagined it would be this good. Bagay!