Nothing Lasts Forever...and Tyres Are No Exception

[d'flash]

sir i bought my brand new tyres nitong march lang, sa kasamaang palad, napasabak ako sa lubak at nung nag carwash/wax ako at tire black, napanasin ko na nagka biyak yung front tire ko, mga half inch siya, pinacheck ko sa tire shop, sabi ok lang daw yun, para daw daw sa peace of mind ko, susunigan daw nila para matapalan, okay ba yun? di pa papangit gulong ko? may lakad kasi ako sa sat eh, medyo malayo ang byahe di kaya biglang sumabog gulong ko nun? btw nankang 195/50/15 yung tyres ko.

[1D4LV]

sir i bought my brand new tyres nitong march lang, sa kasamaang palad, napasabak ako sa lubak at nung nag carwash/wax ako at tire black, napanasin ko na nagka biyak yung front tire ko, mga half inch siya, pinacheck ko sa tire shop, sabi ok lang daw yun, para daw daw sa peace of mind ko, susunigan daw nila para matapalan, okay ba yun? di pa papangit gulong ko? may lakad kasi ako sa sat eh, medyo malayo ang byahe di kaya biglang sumabog gulong ko nun? btw nankang 195/50/15 yung tyres ko.

san yung biyak? sa sidewall o sa surface?
kung sa surface, patapalan mo yung loob as in parang vulcanized.
kung sa sidewalls, delikado.

[d'flash]

san yung biyak? sa sidewall o sa surface?
kung sa surface, patapalan mo yung loob as in parang vulcanized.
kung sa sidewalls, delikado.

sa sidewall sir eh, so di ko muna pwede ibyahe ng malayo? or pag pinatapalan ko po ba? will it work?

[1D4LV]

sa sidewall sir eh, so di ko muna pwede ibyahe ng malayo? or pag pinatapalan ko po ba? will it work?

sidewall? delikado.... bubukol din yan, tapos pwede sumabog.

[Retz]

sir i bought my brand new tyres nitong march lang, sa kasamaang palad, napasabak ako sa lubak at nung nag carwash/wax ako at tire black, napanasin ko na nagka biyak yung front tire ko, mga half inch siya, pinacheck ko sa tire shop, sabi ok lang daw yun, para daw daw sa peace of mind ko, susunigan daw nila para matapalan, okay ba yun? di pa papangit gulong ko? may lakad kasi ako sa sat eh, medyo malayo ang byahe di kaya biglang sumabog gulong ko nun? btw nankang 195/50/15 yung tyres ko.

Sir, kindly post pectures for better appreciation.

[mda]

sir i bought my brand new tyres nitong march lang, sa kasamaang palad, napasabak ako sa lubak at nung nag carwash/wax ako at tire black, napanasin ko na nagka biyak yung front tire ko, mga half inch siya, pinacheck ko sa tire shop, sabi ok lang daw yun, para daw daw sa peace of mind ko, susunigan daw nila para matapalan, okay ba yun? di pa papangit gulong ko? may lakad kasi ako sa sat eh, medyo malayo ang byahe di kaya biglang sumabog gulong ko nun? btw nankang 195/50/15 yung tyres ko.

In my opinion, that's the problem with the cheaper chinamade tires.

After all the abuse we've put our cars through, none of our Yokohamas/Bridgestones (Yoko A.Drive/A300 / Bridgestone Turanzas) have had major cracks/bumps.

It's always your call kung itutuloy mo yung lakad. But better safe than sorry. I'd replace the tire na.

Edit: Can't see the picture

[Retz]

repost ko lang pix ni d'flash:

[d'flash]

repost ko lang pix ni d'flash:

thanks bro, sample pics lang yan, same ng nangyari sa tire ko.

[mda]

thanks bro, sample pics lang yan, same ng nangyari sa tire ko.

^ Depends how deep the cut is into the sidewall. Will a thin ruler fit through the crack so you can check? (Not sure if there are other alternatives on how to check how deep the cut really is)

Based on readings from the internet, <basta> hindi pa umabot/nagexpose ng cord, parang okay pa naman. Just be a little more careful/don't push the tire so hard I guess?

[d'flash]

^ Depends how deep the cut is into the sidewall. Will a thin ruler fit through the crack so you can check? (Not sure if there are other alternatives on how to check how deep the cut really is)

Based on readings from the internet, <basta> hindi pa umabot/nagexpose ng cord, parang okay pa naman. Just be a little more careful/don't push the tire so hard I guess?

wala naman nakitang thread at nung chineck ng tire shop susunugan lang daw, para magdikit ulit, sir mda dapat ko bang bawasan na lang yung psi ko? from 30 to 28?

[mda]

wala naman nakitang thread at nung chineck ng tire shop susunugan lang daw, para magdikit ulit, sir mda dapat ko bang bawasan na lang yung psi ko? from 30 to 28?

I'd rather not lower the psi kasi underinflation (aside from higher fuel consumption) generates excess heat = may also lead to blowout.

Again, since we haven't seen the tire itself, it's important to note that whether or not the tire is safe to use will depend on the depth of the cut compared to the actual width of the sidewall. I'm just saying that if the cut isn't so deep (lack of pics, difficult to call), you can still *probably* use it.

I'm hoping the tire is due for replacement anyway sometime soon.

[stickers]

thanks bro, sample pics lang yan, same ng nangyari sa tire ko.

looks pretty bad since nasa sidewall area na nga.. ok sana kung sa surface.. pede pang mavulcanize.

[Retz]

thanks bro, sample pics lang yan, same ng nangyari sa tire ko.

looks very bad imo. baka hindi din tatagal tyre mo kung sakali ni repair.

[Retz]

thanks bro, sample pics lang yan, same ng nangyari sa tire ko.

looks very bad imo. baka hindi din tatagal tyre mo kung sakali ni repair.

[ghosthunter]

repost ko lang pix ni d'flash:

Looks like the tire was under-inflated and used a lot that way to cause that crack.

[shadow]

Looks like the tire was under-inflated and used a lot that way to cause that crack.

Diba pag underinflate eh dapat horizontally yun mga cracks


Sent from my iPad using Tapatalk HD