Parts Price for Isuzu

**wildsonix** · March 26th, 2009 10:02 AM

magandang umaga po.

San po ba makakuha ng antenna for Crosswind. Naputol na po kasi yung antenna ng XUV ko. Nagtanong ako sa casa mga 2k includng installation daw. Baka may alam kayo mas mura. Un foglamps ko rin pinasok ng tubig tsaka putik sa loob mga magkanop kaya abutin kung palitan foglamp assy? Inquire ko na rin ff:
1. door visors
2. side mirrors wth LED
3. shock absorbers

**madzrols** · April 8th, 2009 11:18 AM

Mga sir, need help naman po,kasi yung nabili na mura ng tatay ko eh balot ng masilya buong body,indi pa pantay-pantay masilya,as in nababoy tlga,indi sila kasi nagdala mekaniko nung tnignan.pinakita namin s mga body repair shops,sabi nla gumulong daw.tanong ko lng po magkano surplus xuv body or kahit mga poste lng...any info kilala nyo nagbebenta body parts na mura...tnx po

**anthon05** · April 15th, 2009 01:07 PM

hi xto ko pinalitan ko lang clutch master assembly,, you can use Seiken. sabi sa akin mahusay din daw, two kinds sya steel or aluminum. i bought the steel kasi mas mura 1800 petot.

ang question kung anong difference ng steel and aluminum na clutch master.... Patulong mga fellow car owners.

and saan ka makabili ng antenna na mura,,, naputol din antenna ko

thanks

Originally Posted by white xwind

good morning po!

walco prices as of 1-24-09:

for crosswind
upper ball joint(orig) P2,200
lower ball joint(orig) P2,000
upper ball joint(replacement) P550
lower ball joint(replacement) P450

primary clutch assembly(orig) P8,500
clutch repair kit (orig) P700

mga sirs kelangan ko na palitan master/primary clutch ko e may mga ma sa suggest pa ba kayo ibang brands? medyo masakit sa bulsa yung P8500. hehehehe! replacement na kase yung clutch ko. di ko na makita yung orig part dati. thanks po!

**blue_gambit** · April 21st, 2009 02:53 PM

sir mahal ang primary clutch na yan, go for replacement na lang d k pa aabot ng 2K sa clutch master assembly. Advice lang forget the repair kit, change the whole assembly. to be sure if replacement taiwan gamitin mo papalitan mo yung loob ng seiken brand or equivalent. Baby clutch master goes less than 700 pesos I think. Labor siguro wala pa 1000 for both.
sa balljoint mag 555 ka na lang, make sure na orig me fake kc eh. look for the embossed logo & greese fitting its at the top for ease of access.

Sa Clutch Basta japan replacement ok, taiwan pede na. wag lang china. sometimes me korea made din.

bilihan? sa recto theres jayson I think, but sa jetco (recto),( meron din jetco pasay) kami dati bumibili. Ngaun coz kamanava area ako sa macarthur hi-way malabon near sea-oil meron dun mura din its Century auto supply

Originally Posted by white xwind

good morning po!

walco prices as of 1-24-09:

for crosswind
upper ball joint(orig) P2,200
lower ball joint(orig) P2,000
upper ball joint(replacement) P550
lower ball joint(replacement) P450

primary clutch assembly(orig) P8,500
clutch repair kit (orig) P700

mga sirs kelangan ko na palitan master/primary clutch ko e may mga ma sa suggest pa ba kayo ibang brands? medyo masakit sa bulsa yung P8500. hehehehe! replacement na kase yung clutch ko. di ko na makita yung orig part dati. thanks po!

**white xwind** · April 22nd, 2009 12:20 AM

thanks mga sirs! i got the aisin brand of clutch replacement.. since kelangan na talaga palitan and hindi na ako makapag canvass sa mga shops dito due to time constraints.
it cost me 650php. di ko lang alam kung taiwan to or japan pero nung tinanong ko sa shop owner japan naman daw.
pansin ko lang kapag medyo mainit na ang makina(2 or more hours of driving) ko and heavy heavy traffic na parang lumalangitngit na yung clutch.. tipong parang nagagasgas kapag tinatapakan.
sa replacement master clutch lang ba ito or there could be other reasons? should i buy other brand naman ng master clutch assembly? thanks po mga sirs!

**anthon05** · April 24th, 2009 05:21 PM

Hi not familiar with aisin brand. pero mura sya for a clutch master assembly,
bka may problem sa nabili mo kaya may naramdaman ka in heavy traffic.

mine i bought the Seiken brand. 1800. pa check mo uli sa mechanic
sa tingin ko may brand na ganun talaga, hirap siya pag nainitan.

Originally Posted by white xwind

thanks mga sirs! i got the aisin brand of clutch replacement.. since kelangan na talaga palitan and hindi na ako makapag canvass sa mga shops dito due to time constraints.
it cost me 650php. di ko lang alam kung taiwan to or japan pero nung tinanong ko sa shop owner japan naman daw.
pansin ko lang kapag medyo mainit na ang makina(2 or more hours of driving) ko and heavy heavy traffic na parang lumalangitngit na yung clutch.. tipong parang nagagasgas kapag tinatapakan.
sa replacement master clutch lang ba ito or there could be other reasons? should i buy other brand naman ng master clutch assembly? thanks po mga sirs!

**blue_gambit** · April 25th, 2009 05:15 PM

Aisin din gamit ko na brand, works fine with me. Baka yung naririnig mo is when you press the clutch yung langitngit? If galing sa ilalim ng dash board yung clutch pedal spring lang yun, use some grease on the spring and it'll go away. To find it, trace the pivot point of the clutch pedal there yup'll see a spring, sa crosswind you might have to remove the lower panel of the dash board on the driver side. Or palagyan mo na lang sa mekaniko mo tpos bigyan mo na lang ng pang yosi! hehehe

Originally Posted by white xwind

thanks mga sirs! i got the aisin brand of clutch replacement.. since kelangan na talaga palitan and hindi na ako makapag canvass sa mga shops dito due to time constraints.
it cost me 650php. di ko lang alam kung taiwan to or japan pero nung tinanong ko sa shop owner japan naman daw.
pansin ko lang kapag medyo mainit na ang makina(2 or more hours of driving) ko and heavy heavy traffic na parang lumalangitngit na yung clutch.. tipong parang nagagasgas kapag tinatapakan.
sa replacement master clutch lang ba ito or there could be other reasons? should i buy other brand naman ng master clutch assembly? thanks po mga sirs!

**white xwind** · April 26th, 2009 03:36 PM

will do po! salamat mga boss!

**blue_gambit** · April 27th, 2009 04:02 PM

sure thing

Originally Posted by white xwind

will do po! salamat mga boss!

**rsnald** · May 25th, 2009 03:32 AM

just went to walco last saturday, bakit parang bigla nagtaas sila ng price ng balljoints? or do you have to be a suki to get the prices that was previously mentioned here. yung 555 na replacement balljoints went for 850 lower and 1100 for upper balljoint. walang pinag iba sa mga natanungan kong shops.

anyway, dagdag ko na lang sa list price ng crankshaft idler pulley: goes for 2200. Had mine replaced recently.