Need advise about 4ja1-turbo engine

[fahrenheit20]

mga sir,
pwede pong magtanong kung mgkano 2nd hand 4JA1-turbo na engine ng sportivo yung may papers?san po pwede makipagswap 4JA1 engine non-turbo sa 4JA1 turbo?we're planning kc to change engine our crosswind xuv 2003..
tnx in advance!

[4JGtootsie]

Sir bakit niyo gusto palitan?
Kung more power you might want to consider 4JB1-t

[GundamWing]

wala na bang conversion kapag pinalitan ng 4jb1 ang corsswind?

[BeetOls]

how much is the gain from an NA 4ja1 to the turbo version? i think i've read somewhere here in the forum about a turbo kit for it? i might be mistaken though.

tried shopping around as i'm preparing for the inevitable (although i hope not any time sooN), a bnew 4jb1t would cost around P300k, including the tranny; this is from the casa; parang gusto ko nalang magpa overhaul should the time come...

sir 4jg, is that worth it if i want to keep my rig? do you guys at central diesel recommend overhauling instead?

thanks

[fahrenheit20]

sir 4JGTootsie, gsto ko lng sna malaman cost papalit makina kasi yung nabili ng tatay ko n 2003 xuv manual eh marami n mileage 171K km na eh baka malapit na bumigay makina kaya naisipan ko itanong

[mintoy]

sir 4JGTootsie, gsto ko lng sna malaman cost papalit makina kasi yung nabili ng tatay ko n 2003 xuv manual eh marami n mileage 171K km na eh baka malapit na bumigay makina kaya naisipan ko itanong

bro. mababa pa ang 171km para sa 4ja1 mo. sabi ng kaibigan ko sa isuzu. those engines will run up to 300k km. basta alaga sa langis and proper maintenance. fuego 4jb1t ng asawa ko 280K+km na. hindi pa na overhaul. calibration lang ang ginawa sa makina. and it still runs well.

bro. very powerful ang 4jg2 engine. the crosswind was not designed to handle the power of this engine. you will have to also upgrade other components like the brakes.

[4JGtootsie]

sir 4jg, is that worth it if i want to keep my rig? do you guys at central diesel recommend overhauling instead?

thanks[/QUOTE]

Kung ako lang ang masusunod overhaul. Basta you follow the data, tolerances and specification then magandang break-in solve!

171klm for isuzu mills are peanuts especially for non aspirated engines.

Yung nagoverhaul ako ng 4JG2-TC ko, masaya ako dahil nakita ko talaga ang laman,how it works, stress and wear areas at gaano kabigat ang mga components,ni check ko lahat ng conponents according sa manual.

[983264]

Good morning mga sir, ask ko lang po, which is better na ilagay sa crosswind? 4JG2-TC or 4JB1-TC? In terms of mileage and power, which is better sa dalawang makina? We are planning to change the engine of our 2002 XUV Crossswind... We need some advice... Good thing merong na open ng thread na ito ^_^