isuzu hilander owners

[dongmbb]

Goodmorning mga sir. may tanong lang po ako. 2nd hand po kasi yung highlander namin and mahina po yung aircon kahit bago yung compressor.nagtitingin tingin ako sa net and may nabasa ako na yung condenser niya 2 pcs?yung amin kasi 1 pc lang sa harap ng radiator and hindi na ata stock kasi sa nakikita ko sa net hindi rectangular yung shape nung condenser nila.thanks!

Sir dalhin mo nalang sa magaling na aircon shop para solve na agad problem mo. Kung malapit ka sa Ceejay ng Las Pinas dun mo na dalhin subok kona yon at maasahan talaga.

[dongmbb]

good day HiLanderSl,
palagay ko naging pareho tayo naging problema ng hi-lander SL natin. problema ko yan dati wayback 2years ago.
nagpunta ako sa magaling na auto service shop sa magaling na mekaniko, binuksan ang hood then start engine, ayun na nga malakas ang vibration. tinanong nya ako kung anu na ang mga ginawa sa car ko, pinagawa ko na:
1. change oil
2. change oil filter
3. change fuel filter
4. change air filter

kulang nalang change car! joke!

then he asked me kung kelan huling nagpa adjust ako ng valve clearance. matagal ng hindi pa na-adjust ang valve clearance sa pagkakaalam ko.
then nagsuggest sya at inayunan ko naman na gawin nya i-adjust valve clearance.pero sa madaling sabi he found out wala halos lahat sa standard ang valve clearance pagkatapos gamitan ng feeler gauge tool, kahit anung pihit nya sa drive pulley para makuha ang BTDC in order to correct the appropriate clearances of each valve. yun ang main cause kaya parati malakas ang vibration ng makina.

Recommendation ng mekaniko is to submit into top overhaul work. ayun upon dismantling various engine parts on top nakita ko yun mga valves may mga ukit na malalim sa tip ng valve yun iba mababaw at concave ang shape ng tip nito
.
top overhauling ang ginawa, palit lahat ng:
1. valve (4ja1 ang hi-lander though 4jb1 valve is okay kc dala ko sample at exactly the same physical aspect as advise by jayson auto supply)
2. valve seal
3. overhauling gasket
note: dapat original lahat para sure.

Remarks: upon completion of work, I'm 101% satisfied at masaya of course kasi problem has been solved diba?!
share ko lang naman eto sayo. who knows baka yan din talaga problem ng hi-lander mo diba?
But, hindi ko sinasabi sayo nor advising you to have to do that all the way.
Better seek another opinion from your trusted and versatile mechanic to be able to analyse whats probably the main cause problem of your car.
As i've said it's only my shares to you. Good Luck and God bless!

Sir magkano po ang total cost ng top overhaul nyo? TIA

[marq]

Sir magkano po ang total cost ng top overhaul nyo? TIA

mga 7k din kundi ako nagkamali kasi diko na maalala. pero pag makita ko or mahanap resibo feed back kita. why?

[dongmbb]

mga 7k din kundi ako nagkamali kasi diko na maalala. pero pag makita ko or mahanap resibo feed back kita. why?

Eh suggest ko ksai sa bayaw ko na ipa top overhaul yong hilander nya at iba na rin ang tunog at least may idea kami kung magkano ang magastos.

[lgp]

good day HiLanderSl,
palagay ko naging pareho tayo naging problema ng hi-lander SL natin. problema ko yan dati wayback 2years ago.
nagpunta ako sa magaling na auto service shop sa magaling na mekaniko, binuksan ang hood then start engine, ayun na nga malakas ang vibration. tinanong nya ako kung anu na ang mga ginawa sa car ko, pinagawa ko na:
1. change oil
2. change oil filter
3. change fuel filter
4. change air filter

kulang nalang change car! joke!

then he asked me kung kelan huling nagpa adjust ako ng valve clearance. matagal ng hindi pa na-adjust ang valve clearance sa pagkakaalam ko.
then nagsuggest sya at inayunan ko naman na gawin nya i-adjust valve clearance.pero sa madaling sabi he found out wala halos lahat sa standard ang valve clearance pagkatapos gamitan ng feeler gauge tool, kahit anung pihit nya sa drive pulley para makuha ang BTDC in order to correct the appropriate clearances of each valve. yun ang main cause kaya parati malakas ang vibration ng makina.

Recommendation ng mekaniko is to submit into top overhaul work. ayun upon dismantling various engine parts on top nakita ko yun mga valves may mga ukit na malalim sa tip ng valve yun iba mababaw at concave ang shape ng tip nito
.
top overhauling ang ginawa, palit lahat ng:
1. valve (4ja1 ang hi-lander though 4jb1 valve is okay kc dala ko sample at exactly the same physical aspect as advise by jayson auto supply)
2. valve seal
3. overhauling gasket
note: dapat original lahat para sure.

Remarks: upon completion of work, I'm 101% satisfied at masaya of course kasi problem has been solved diba?!
share ko lang naman eto sayo. who knows baka yan din talaga problem ng hi-lander mo diba?
But, hindi ko sinasabi sayo nor advising you to have to do that all the way.
Better seek another opinion from your trusted and versatile mechanic to be able to analyse whats probably the main cause problem of your car.
As i've said it's only my shares to you. Good Luck and God bless!

Good day po. Tanong ko lang po kung may involved na machining sa top overhaul? Thanks po.

[marq]

Good day po. Tanong ko lang po kung may involved na machining sa top overhaul? Thanks po.

wala involved machining. kundi we rebuild some rocker arm by manual sanding (niliha) para mawala yun deform phase kc may uka.

[yagbolts]

Hindi siya masyado mataas eh, hindi din po naka dive, siguro may difference lang na mga 2-3 inches, pipicturan ko na nga hi lander namin para makita nyo hehe,

Sir saan nyo pinagawa yung longer shakles and additional leaf spring? how much po? medyo flat na kasi leaf spring ko and advise ng zafra, paluin daw yung leaf para mag curve ulit.

[blue_gambit]

Sir saan nyo pinagawa yung longer shakles and additional leaf spring? how much po? medyo flat na kasi leaf spring ko and advise ng zafra, paluin daw yung leaf para mag curve ulit.

Naka ganyan na Hi-lander ko pre, Kung di naman kakargahan ng mabigat I suggest you buy a new set na lang. I think its around 3.5K per set so around 7K i budget nyo. Pag extended shackles you need to have it welded for lateral reinforcement para maiwasan ang rear sway, plus its a bit more matagtag without load. You'll need a new center bolt and U bolt din for this project. If you really want to additional leaf springs lang (P800 yata yung 2nd leaf ko noon), you can buy at masangkay st., binondo, manila. Dun ako nakabili, 4' long shackles sa mga auto supply dami nyan. Good luck

[wayne08]

Good morning mga sir.. Hi-lander XTRM and Sportivo user.. Sali po kayo sa Team Isuzu Pilipinas.. https://www.facebook.com/groups/60168997672/

[GM_FG]

Good Day mga Sir, paano po ba i replace ang front rotor disk ng hilander sl? Thanks a lot in advance...