Results 1 to 10 of 5235
Hybrid View
-
Tsikot Member Rank 2
- Join Date
- Apr 2008
- Posts
- 1,557
October 4th, 2008 09:36 AM #1
-
October 8th, 2008 02:38 PM #2
-
October 8th, 2008 02:52 PM #3
guys, what would be nice sa grill ko to modify... the grille would be from the old d-max.. should i take out the vertical or horizontal lines??? any suggestions naman... hehehehe.... iv taken out the chrome already but not sure kung what configuration to do... i have thought of doing the ford explorer configuration... ill just leave the middle grille vertical lines and take out the 2 vertical sa side
-
October 8th, 2008 05:21 PM #4
-
October 8th, 2008 05:37 PM #5
Akala ko ba papa-fabricate ka?
For me, mas bagay ang horizontal lines sa grill so take out the vertical ones. You can go for body color or GunMetal Gray para astig :thumbup:
.
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
October 9th, 2008 06:16 AM #6ako parang type ko yung ala-TRD look ng hilux
eto link in case hindi magshow up ang picture - http://www.caradvice.com.au/wp-conte....thumbnail.jpg
-
Tsikot Member Rank 2
- Join Date
- Apr 2008
- Posts
- 1,557
October 18th, 2008 08:52 AM #7Mine is 08 Dmax LS M/T, bought it last August and odo reads just above 4110 kms. I hear that clutter sound too and when I press the clutch, it will become less noisy. I don't know the reason behind that but it sounds normal to me. I think Isuzu engines have that very audible clutter sound.
-
October 18th, 2008 12:49 PM #8
I also have the same rattle since my 15k and has gotten a bit worse (in sound) since then. Actually I was already anticipating this even before I got my unit since my initial research with actual D-Max owners acknowledged this common transmission problem.
I applied for it to be warrantied and I'm guessing that it's either the release bearing or the clutch plate springs. It is not normal so for you guys who have the same experience, better have it confirmed asap especially if your still under warranty.
.
-
October 21st, 2008 06:12 AM #9
Fellow D-Maxers, sign up na kayo dito para may isa pa tayong tambayan: http://ivea.bigforumpro.com
-
October 9th, 2008 09:23 AM #10
hehehe.. yup sana nga magpa fabricate ako... but the cost would be high for just 1 grille to make... so, i look for an old grille d2 sa shop dat we replaced b4 and nagwakas din... nakakita ako with minimal damage lang... had some fiberglass fixing lng and tapos.. in the process of taking out the chrome plating... hehehehe.... i.body color ko lang the grill and the screen would be black... hehehe....
Yes, i do think so. Since it's based on the 4th-gen delica/space gear, which in turn shares some of...
Mitsubishi Philippines