Isuzu Crosswind Owners Thread [continued]

**HUMABOL KA** · July 27th, 2013 02:14 PM

Top Speed Isuzu Panther 2.5L Turbo Diesel - YouTube

possible kaya yan na magawa dto sa pinas?, counterpart ng crosswind sa indonesia isuzu panther low charge turbo lang dn ata yan not sure though

ito daw gnawa para umabot ng ganyan

Little modification has been implemented:
*deactivate the EGR
*adjust the fuel load consumption
*increase the turbo boost

**nelany** · July 29th, 2013 10:18 AM

Originally Posted by HUMABOL KA

Top Speed Isuzu Panther 2.5L Turbo Diesel - YouTube

possible kaya yan na magawa dto sa pinas?, counterpart ng crosswind sa indonesia isuzu panther low charge turbo lang dn ata yan not sure though

ito daw gnawa para umabot ng ganyan

Little modification has been implemented:
*deactivate the EGR
*adjust the fuel load consumption
*increase the turbo boost

Wala naman EGR ang crosswind. Yung #2 & 3 ay ginagawa yan sa atin.

**unsec87** · July 29th, 2013 11:28 AM

Good day mga sir,

Ask ko lng po due na kami for 10k pms. Saan po ba magandang casa pa-service ng crosswind natin? And how much mo kaya estimated cost ng PMS. thanks.

**ImagongPinoy** · July 29th, 2013 05:52 PM

Not sure if this is the right thread but would like to inform everyone that my 2003 Isuzu Crosswind XUVi with Plate Number: XGF562 was stolen last July 5 at Batangas City.

Plate #: XGF562
Color: Satin Silver.

Already reported that day on local authorities and HPG.

Sleepless nights since my car was stolen :-(

**nelany** · July 29th, 2013 06:32 PM

Originally Posted by ImagongPinoy

Not sure if this is the right thread but would like to inform everyone that my 2003 Isuzu Crosswind XUVi with Plate Number: XGF562 was stolen last July 5 at Batangas City.

Plate #: XGF562
Color: Satin Silver.

Already reported that day on local authorities and HPG.

Sleepless nights since my car was stolen :-(

Hindi umubra yung alarm? Wala ka bang mechanical wheel lock?

**unsec87** · July 30th, 2013 10:15 AM

Hi guys, share ko lang po regarding sa changing ng ilaw sa odo ng crosswind sabi sa isuzu 400 daw yun bulb tapos 600 yung labor. Ask ko langpo kasi 10k pa lang natakbo ng crosswind nmin diba dapat under warranty pa yun? Thanks

**romeocharlie** · July 30th, 2013 10:22 AM

Originally Posted by ImagongPinoy

Not sure if this is the right thread but would like to inform everyone that my 2003 Isuzu Crosswind XUVi with Plate Number: XGF562 was stolen last July 5 at Batangas City.

Plate #: XGF562
Color: Satin Silver.

Already reported that day on local authorities and HPG.

Sleepless nights since my car was stolen :-(

Ala eh, saan nakuha ang sasakyan mo dito saten sa batangas city? Talagang delikado na ang panahon ngayon..

Sent from my iPhone using Tapatalk

**joemarski** · July 30th, 2013 11:01 AM

Originally Posted by unsec87

Hi guys, share ko lang po regarding sa changing ng ilaw sa odo ng crosswind sabi sa isuzu 400 daw yun bulb tapos 600 yung labor. Ask ko langpo kasi 10k pa lang natakbo ng crosswind nmin diba dapat under warranty pa yun? Thanks

Under warranty pa nga 'yan sir. Aayusin o papalitan nila 'yan "free of charge".
Kaya ka lang siguro sinisingil ng casa baka hindi alam na under warranty pa car mo.
IIRC, 3yrs/100,00km ang mga warranties nila ngayon.

Correct me if I'm wrong guys, pero kung wala ka namang binago, pinalitan o ginalaw sa mga original parts,
(except of course 'yung mga nabangga o na- aksidente) it means na defective 'yung part/s na 'yun
and since under warranty nga, dapat nilang ayusin or palitan. hth.

**tnfsurge** · August 1st, 2013 10:40 AM

hello,

newbie here.

Ask ko lang po kasi meron kami Isuzu crosswind xuv (yr 2002) around 280,000+ km na tinakbo.
Last monday bumyahe kami from bicol to manila and bigla namatay yung makina habang tumatakbo although nag start naman. And na-notice ko na parang hindi nabuburn ng maayos yung fuel dahil sa amoy ng usok sa tambutso.

Meron po ba naka experience ng ganito? Ano po kaya ang mga possible ipacheck or possibleng solution?

btw, engine start is ok naman although mausok na sya pero di naman talaga maitim and mejo ramdam na namin yung hina ng hatak specially pag loaded. Pinagtanong na namin sa calibration shop sa bicol ang sabi kelangan na daw palitan nozzle that might cost around 16k all-in. Should we go with it or ok lang na ipaclean muna yung nozzles?

would appreciate your response.

regards

**unsec87** · August 1st, 2013 12:38 PM

Sir joemarski, hindi daw po kasama mga ilaw sa warranty yun po sabi ng SA sa isuzu. Hindi ko na din po pinagawa kasi mahal baka sa labas na lang ng casa pagawa.