All New Isuzu MU-X // Alterra Next Generation

**jvamar07** · February 13th, 2017 01:46 PM

Originally Posted by StockEngine

"Are not yet well lubricated"?

If you design engines that are not well lubricated sa break-in period patay lol.

What I mean is that the components have just stared moving and lubrication have not yet penetrated on it. As I have said, I am not an Engineer. If you can enlighten as newbies about this the better.

Sent from my SM-N910C using Tapatalk

**dct** · February 13th, 2017 02:50 PM

Ano magagawa natin dyan? E kahit yung "new stock" sa stock yard na bibilhin natin, puro gasgas yan sa stock yard. Inaayos lang talaga before release

Sent from my SM-A9000 using Tapatalk

**Janemar** · February 13th, 2017 03:33 PM

There are several parts na need mo i break in from production.

1. Gear box / Rear differential(front and transfer case if equiped) - 500kms, soft accel/deccel lang and should not exceed atleast 100kph so it would not overheat the oil due to tight tolerance pa when new.

2. Engine, we only break in the rings. - 500kms, soft accel, if turbo, limit use of boost. Then lots of vaccuum to force the rings to expand on the cylinder bore.(engine brake and down hill) No speed limit but dont over rev or rev higher than 1/2 of your redline.

3. Brake - 100 - 20kph hard braking. Do it 10 times and cool off for 1 km in between. Done.

4. Clutch both in Automatic and manual, smooth accel and deccel lang. No speed limit.

5. Tires, 500kms. No speedlimit but madulas pa ito kaunti..

**Janemar** · February 13th, 2017 03:41 PM

Originally Posted by dct

Ano magagawa natin dyan? E kahit yung "new stock" sa stock yard na bibilhin natin, puro gasgas yan sa stock yard. Inaayos lang talaga before release

Sent from my SM-A9000 using Tapatalk

Some use car carrier for delivery.

Pero pag wala talaga at OC ka sa initial mileage, you can ask na padeliver mo sa nearest isuzu branch near the port then kaw na lang mag pick up and drive home to assure proper breakin.

**MigeLlacuna** · February 13th, 2017 04:06 PM

Originally Posted by Janemar

There are several parts na need mo i break in from production.

1. Gear box / Rear differential(front and transfer case if equiped) - 500kms, soft accel/deccel lang and should not exceed atleast 100kph so it would not overheat the oil due to tight tolerance pa when new.

2. Engine, we only break in the rings. - 500kms, soft accel, if turbo, limit use of boost. Then lots of vaccuum to force the rings to expand on the cylinder bore.(engine brake and down hill) No speed limit but dont over rev or rev higher than 1/2 of your redline.

3. Brake - 100 - 20kph hard braking. Do it 10 times and cool off for 1 km in between. Done.

4. Clutch both in Automatic and manual, smooth accel and deccel lang. No speed limit.

5. Tires, 500kms. No speedlimit but madulas pa ito kaunti..

copy sir. salamat sa info.https://www.tsikot.com/forums/images/smilies/bowako.gif

**LancerA174A** · February 13th, 2017 09:35 PM

http://community.headlightmag.com/in...?topic=56761.0

THE NEW ISUZU MU-X BLUE POWER - YouTube

2017 Isuzu mu-X facelift, not digging the white interior and wood trims though. Mukhang nabalutan na ng soft touch materials yung plasticky interior lol.

Sent from my E6683 using Tsikot Forums mobile app

**jvamar07** · February 15th, 2017 06:27 PM

Sent from my SM-N910C using Tapatalk

**x-wind** · February 18th, 2017 09:59 PM

Ask ko lang sino may alam na online store sa thailand na pwede magparating ng upper spoiler ng mux yun original.

Sent from my SM-J700H using Tsikot Forums mobile app